This single-speed model quickly cuts fiber-cement siding and 1/2in. thick backer board with no airborne dust. Durable A-2 tool steel blades last longer and cut cleaner than carbide-tipped saw blades. U.S.A. Cordless: No, Amps: 5, Volts: 120 Aluminum cutting head

The Makita 18V Cordless Reciprocating Saw is powered by a Makita-built variable speed motor that delivers 2900 strokes per minute, combined with a 1 1/8in. long stroke to provide faster cutting. Tool-less blade change system enables faster blade installation and removal for increased productivity. Compact, ergonomic design fits like a glove with even pressure and easy control. Retractable tool hook and built-in LED lights make this versatile saw easier to use on the jobsite. U.S.A. SAVE MONEY by replacing or adding specific tools that work with the Makita 18V LXT Lithium-Ion battery and charger you already own. The Makita 18V bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Makita bare tool to your 18V LXT cordless system today. Cordless: Yes, Volts: 18, Variable Speed: Yes, Stroke Length (in.): 1 1/8, Strokes Per Minute (SPM): 2,900, Tool Length (in.): 19 5/8, Tool Weight (lbs.): 8.2 (with battery), Battery Included: No, Charger Included: No, Case Included: n Tool only; battery and charger sold separately Cuts up to 5 1/8in. dia. pipe Cuts up to 10in. wood (with 12in. blade) Soft grip handle provides increased comfort on the job Retractable tool hook secures the tool when not in use Two built-in LED lights illuminate the work area Large 2-finger variable speed trigger for added convenience LXT lithium-ion battery and Rapid Optimum charger produces 430% total lifetime work with 3X more cycles

With a direct-drive 1 HP motor, this wet saw from QEP is surprisingly quiet but delivers enough power to handle ceramic, slate, marble, granite and porcelain. HP: 1, Speed - No Load (RPM): 3300, Cutting Thickness (in.): 1 1/5, Blade Diameter (in.): 7 6.35 Amps Laser cutting guide projects accurate cutting path Water catching system reduces runoff and returns water to reservoir Tilting table for 15, 30 and 45° miter cuts Automatic thermal overload protection

Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 900, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No Variable speed for drilling in a wide variety of materials Lightweight cast aluminum gear housing All ball-and-needle bearing construction Comfortable side handle rotates 360° Retractable belt clip allows operation in tight areas Overall length 12in. Model DP4000

The Milwaukee M12™ Cordless PVC Shear utilizes a super-sharp stainless steel blade for burr-free cuts, slicing through 2in. PVC in as fast as 3 seconds. An offset blade easily cuts PVC mounted to a stud or close to a wall. Cordless: Yes, Volts: 12, Cutting Depth (in.): 2, Battery Included: Yes, Charger Included: Yes, Case Included: Yes 1900 in.-lbs. torque Quick-return blade increases productivity All-metal planetary drive delivers over 200 cuts per charge Impact-, water- and rust-resistant aluminum jaw Variable speed trigger On-board fuel gauge displays remaining run time

The Milwaukee rotating handle Orbital Super Sawzall reciprocating saw provides the ultimate in power and versatility. Rotating handle locks at 45° increments and rotates continuously without going back to starting position. Trigger stays on while rotating for optimal user comfort in various cutting positions. U.S.A. Cordless: No, Amps: 13, Variable Speed: Yes, Stroke Length (in.): 1 1/4, Strokes Per Minute (SPM): 0-3,000, Case Included: Yes Orbital action selector for faster cutting 360° rotating handle with cushion grip Double ball bearing wobble plate mechanism Quik-Lok™ blade clamp Keyless adjustable shoe 10ft. Quik-Lok cord

The Milwaukee® M12™ cordless 2-tool combo kit includes a 3/8in. hammer drill/driver and 1/4in. hex impact driver. 3/8in. hammer drill/driver is subcompact and lightweight at only 7 5/8in. long and 2.8 lbs. for maximum portability for contractors, maintenance crews and remodelers. Delivers 275 in.-lbs. of torque via a 2-speed gearbox. 1/4in. hex impact driver delivers an impressive 850 in.-lbs. of torque in a compact 2.5-lb. package that lets you drive fasteners rapidly and offers extra-long run time. The innovative M12 cordless system is designed to deliver the power and torque required for professional applications in a size that reaches the tightest and toughest places. Powered by Lithium-Ion batteries, the M12 cordless system offers unmatched power, speed and tool belt portability. Tools Included: 3/8in. hammer drill/driver, 1/4in. hex impact driver, Storage Case Included: Yes, Volts: 12, Battery Type: Lithium-Ion, Battery Included: Yes (2), Charger Included: Yes Cordless 3/8in. hammer drill/driver Powerful motor delivers 275 in.-lbs. of torque Compact & lightweight: 7 5/8in. length, 2.8 lbs. 2-speed metal gearbox: 0–22,500 BPM, 0–400/0–1500 RPM 3/8in. metal single sleeve ratcheting chuck for maximum durability, grip and bit retention Onboard fuel gauge displays remaining run time Built-in LED light illuminates work surface Cordless 1/4in. hex impact driver 12V Lithium-Ion battery offers longer run time and lighter weight 0-2000 RPM variable speed trigger 1/4in. hex anvil 850 in.-lbs. of torque Battery fuel gauge displays remaining run time Built-in LED light illuminates work surface

This Milwaukee M12™ cordless combo includes the M12 3/8in. Drill Driver that delivers 275 in.-lbs. of peak torque and the M12 1/4in. Hex Impact Driver that delivers 850 in.-lbs. of torque for fast driving. The innovative Milwaukee M12 cordless system is designed to deliver the power and torque required for professional applications, in a size that reaches the tightest and toughest places. The M12 cordless system offers unmatched power, speed and tool belt portability. Tools Included: 3/8in. drill driver, 1/4in. hex impact driver, Storage Case Included: Yes, Volts: 12, Battery Included: Yes, Charger Included: Yes, 30-minute M12 3/8in. Drill Driver 2-speed (0-1500 / 0-400) All metal gearbox for up to 35% faster drilling / fastening and durability Powerful motor delivers 250 in.-lbs of torque for up to 25% more torque 3/8in. single sleeve ratcheting metal chuck for increased bit retention and durability Lightweight and compact Tool belt portable at only 2 1/2 lbs. and 7 3/8in. Integrated LED and fuel gauge for increased productivity and decreased frustration M12 1/4in. Hex Impact Driver Delivers best-in-class 850 in.-lbs. of torque Compact, lightweight package weighs less than 2 1/2lbs. Powerful enough to drive fasteners up to 75% faster and offers up to 2X longer run time Compact size allows access to tighter areas and reduces user fatigue 12V battery provides longer run time 0-3000 IPM for optimum performance Battery fuel gauge displays the remaining run time Built-in LED light illuminates the work surface

The Milwaukee M12™ Cordless Lithium-Ion Multitool is one of the most versatile jobsite tools. This 12V cordless oscillating tool is ideal for remodelers, flooring contractors, maintenance repair technicians, and electricians that tackle awkward applications on jobsites. This 12V Oscillating Multitool runs 5000 to 20,000 OPM and allows the user to match the speed to the application. Tool has the versatility to perform a variety of applications: flush or plunge cuts, removing grout or grinding thinset, sanding or scraping. The M12 Redlithium™ battery provides ample run time for the user. The universal adaptor (included in each kit) allows the M12 Cordless Lithium-Ion tools to be compatible with most competitive accessories on the market today. The M12 Cordless Lithium-Ion Screwdriver has the power to drive the majority of common small fasteners and provides the run time of full day screwdriving without recharging. The compact size allows the users to work in tight places for increased convenience. Tools Included: Multitool, screwdriver, Storage Case Included: Yes, Volts: 12, Battery Type: M12 Li-Ion, Battery Included: Yes, 2, Charger Included: Yes M12 Multitool Versatile tool cuts, grinds, sands and scrapes M12 Lithium-Ion system is compatible with over 25 cordless tools Includes accessory adaptor, compatible with most competitive accessories Extended run time All metal gearcase for durability Variable speed dial to match speed to application Onboard fuel gauge displays remaining run time M12 Screwdriver Quick bit-loading 1/4in. hex chuck for bit insertion and release with one hand 14 + 1 clutch settings Battery fuel gauge for displaying remaining run time Metal gear housing for jobsite durability Built-in LED for illumination of dark work spots Variable speed trigger for output power control Overmold side and grip for secure grip and work surface protection

The Milwaukee M12 cordless 2-tool combo kit includes the Screwdriver (2401-20) and the Hackzall™ Recip Saw (2420-20). Powered by lithium-ion, the M12 cordless system offers unmatched power, speed, and tool belt portability. Tools Included: Hackzall, sub compact driver,, Storage Case Included: Yes, Volts: 12, Battery Type: Li-Ion, Battery Included: Yes, Charger Included: Yes Hackzall® with variable speed motor at 0–3000 SPM, 1/2in. stroke length Quik-Lok® blade clamp Driver delivers 100 in.-lbs. of torque 0–500 RPM variable speed 1/4in. hex chuck allows one-handed bit changes

The 1/4in. hex quick-change chuck allows for easy bit changes while a variable-speed trigger provides increased user control. The lightweight and compact design minimizes user fatigue. Cordless: Yes, Max. Torque (ft.-lbs.): 116.7, Impacts Per Minute (IPM): 0-3,200, Drive (in.): 1/4, Speed - No Load (RPM): 0 – 2,200, Reversible: Yes, Volts: 18, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 5.75, Tool Weight (lbs.): 3.2 Milwaukee 4-Pole frameless motor maximizes tool efficiency to increase run time Belt Clip allows for easy portability Battery Fuel Gauge displays remaining run time Built-in LED light illuminates work surface

At 8.5 amps this heavy-duty pistol grip hammer drill can handle the toughest drilling of 3/4in. holes in concrete. With dual range speed control, the operator can choose more power to speed for the toughest applications or more speed and less torque for lighter applications. Ideal for use for drilling in wood with Flat Boring Bits, Hole Saws, Auger Bits, and Selfeed Bits. It can also be used to drill in steel with Twist Bits and in concrete with Percussion Bits. Amps: 8.5, Chuck Size (in.): 1/2, Speed (RPM): 1,000 and 2,500, Cord Length (ft.): 10, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No Trigger speed control in two ranges: 0-1000 RPM/0-16,000 BPM; 0-2500 RPM, 0-40,000 BPM, reversing Two modes of operation: hammer with rotation or rotation only Unique brush cartridge system Lightweight 6.4 pounds and well-balanced design 10ft. Quik-Lok® detachable cord

The high-torque Milwaukee M18 18V 1/2in. cordless compact driver is only 7 3/4in. long to fit into tight areas. Built tough to withstand any jobsite condition you throw at it. The tool balance, weight and grip have been optimized to reduce fatigue. Superior bit grip prevents frequent bit retightening and lost bits. Li-Ion battery delivers a long run time between charges. Max. Torque (in.-lbs.): 425, Volts: 18, Speed - No Load (RPM): 0-350/0-1,400, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: 21, Reversible: Yes, Variable Speed: Yes, Battery Amp/Hour: 1.4, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 7 3/4, Tool Weight (lbs.): 4 Two speeds: 0–350 RPM; 0–1400 RPM Built-in LED light Metal gearbox 1/2in. ratcheting chuck Compact 7 3/4in. length fits into tight areas Battery fuel gauge displays remaining run time M18 Li-Ion battery with electronic overload protection and individual cell monitoring

Compact, versatile tool boasts the power to drive screws, fasten and drill. Variable speed trigger for total control of power. All-metal gears will last for many years. Cordless: No, Max. Torque (ft.-lbs.): 88, Impacts Per Minute (IPM): 3,100, Drive (in.): 1/4, Speed - No Load (RPM): 3,200, Reversible: Yes, Amps: 2.9, Volts: 115, Case Included: Yes Variable speed Lightweight aluminum gear housing Dual ball bearing construction Hex bit shank Ergonomic handle Externally accessible brushes

The Milwaukee M18 Cordless Right Angle Drill combines a 3.75in. total head length with an integrated electronic clutch to create the most compact 18V right angle drill driver in the industry. A 3/8in. single sleeve keyless chuck, extended multiposition trigger and up to 125 ft.-lbs. of torque provide versatility, ease of use and power that is unmatched. Max. Torque (in.-lbs.): 100, Volts: 18, Speed - No Load (RPM): 0 – 1,500, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: Yes, 11 + drill, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 1 1/2, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 11 1/4, Tool Weight (lbs.): 3 3/4 Compact drill has 3.75in.L head for working in tight spaces Delivers 125 in.-lbs. of torque 3/8in. single sleeve ratcheting chuck Variable speed, reversible; 0–1500 RPM 11+1 electronic clutch settings Built-in LED lights Extended multiposition handle M18 compact lithium-ion battery

The Makita 18 Volt LXT Cordless 5 3/8in. Metal Cutting Saw features a Makita-built motor that delivers 3600 RPM for faster cutting in a wide variety of metals including Unistrut®, all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more. Compact, ergonomic design and built-in LED make for easy operation and precision. SAVE MONEY by replacing or adding specific tools that work with the Makita 18V LXT Lithium-Ion battery and charger you already own. The Makita 18V bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Makita bare tool to your 18V LXT cordless system today. Cordless: Yes, Blade Diameter (in.): 5 3/8, Volts: 18, Speed - No Load (RPM): 3,600, Cutting Depth at 90° (in.): 2, Arbor Size (in.): 5/8, Battery Included: No, Charger Included: No, Case Included: No Tool only; battery, charger and case not included 3600 RPM for fast cutting Only 5.7 lbs. with comfortable ergonomic grip Built-in LED light illuminates work area Compact, ergonomic design at only 13 3/4in. long Soft grip handle provides increased comfort on the job Versatile saw cuts Unistrut®, all thread, conduit, tubing, channel and more LXT lithium-ion batteries charge in 30 minutes, run longer and deliver 2.5X more cycles (battery and charger not included)

Exclusive Milwaukee electronics provides speed control in this powerful 11 amp polisher. A spindle lock provides convenient accessory changes. Milwaukees exclusive Quik-Lok cord provides instant field replacement for damaged cords. This polisher, when used with the foam pad accessories, is ideal for the clear coat finishes of todays cars. The combination is designed specifically to run cooler and reduce swirl marks. Speed (RPM): 0 – 1,750, Amps: 11, Variable Speed: Yes, Disc Diameter (in.): 7 or 9, OPM: 0 – 1,750 Exclusive electronic dial speed control; ideal for use on clearcoat finishes Self-stopping long-life brush system Lightweight for use with standard liquid polishes Balanced, powerful and rugged

Powerful 5.2 Amp motor operates at 4000 RPM for smooth sanding. Speed (RPM): 4,000, Amps: 5.2, Disc Diameter (in.): 7, OPM: 4,000, Tool Length (in.): 8 7/8 5/8in. spindle thread Lightweight for less fatigue Ball and needle bearing construction for long life and smooth operation Double insulated

Milwaukee Polishers are built for the professional, with a powerful motor to maintain the right speed. This versatile model will accept 7in. or 9in. accessories. Built for a long life, this tool includes helical gearing, all ball and roller bearings and an aluminum gear case with protective urethane bumpers. Speed (RPM): 1,750, Amps: 11, Disc Diameter (in.): 7 or 9, Wheel Diameter (in.): 7/9, Tool Length (in.): 16 1/2, Tool Weight (lbs.): 8.8 Self-stopping long-life brush system Spring-loaded spindle lock for easy backing pad changes Lightweight for use with standard liquid polishes Balanced, powerful and rugged

Muscular, lightweight vertical sander makes quick work of sanding jobs. The design places the powerful 7.9 Amp motor directly over the pad for better balance and control. Variable speed lets you tailor the speed to the application. Speed (RPM): 2,500 - 4,700, Amps: 7.9, Variable Speed: Yes, Disc Diameter (in.): 7, OPM: 2,500 - 4,700 Electronic speed control for constant speeds under load Lightweight for easy control Soft start feature gradually brings tool to speed Lock-on button for continuous operation Double insulated Includes side handle, sanding disc, rubber pad, lock nut and wrenches

This compact, lightweight wrench delivers an impressive amount torque for industrial applications. All-metal hammer casing can withstand the harshest environments. Variable speed control affords maximum efficiency. Cordless: No, Max. Torque (ft.-lbs.): 110, Impacts Per Minute (IPM): 3,000, Drive (in.): 1/2, Speed - No Load (RPM): 3,000, Reversible: Yes, Amps: 2.5, Volts: 115, Case Included: Yes Variable speed Handy tool hook attaches to tool Square drive Rubberized ergonomic grip Externally accessible brushes

The Milwaukee M18 FUEL™ 1/2in. Drill/Driver Kit is a new breed of cordless tool. Utilizing the most advanced technologies in the world, FUEL delivers unrivaled performance in a compact structure. It is built for the most demanding professionals in the world. FUEL delivers up to 10X longer tool life, 25% more power and 50% more run time. With up to 650 in.-lbs. of torque, the M18™ FUEL™ drill/driver is the most powerful drill in its class. Its new Powerstate™ brushless motor provides unmatched power and sustained torque to complete the toughest of applications. The Powerstate motor outperforms all leading competitors and delivers up to 10X longer motor life for maximum durability. Powered by the durable RedLithium™ battery pack, the M18 FUEL drill/driver delivers up to 50% more run time than the competition. The M18 RedLithium batteries provide longer battery life, with over 5X more recharges than competitors. A battery FUEL™ gauge displays remaining charge for less downtime on the job. This drill driver contains an advanced electronic system with Redlink Plus™ intelligence, which provides total system communication with overload protection. The M18™ FUEL™ drill driver comes with the new multi-voltage charger, so you can charge all M12™ and M18™ batteries with one charger. A contoured soft grip gives users the ultimate comfort during prolonged use. The drill driver comes with an all-metal ratcheting locking chuck for maximum grip, bit retention and durability. Tool features an LED light, and is compatible with RedLithium compact and XC battery packs. Max. Torque (in.-lbs.): 650, Volts: 18, Speed - No Load (RPM): 0 - 550 / 0 - 1,850, Chuck Size (in.): 1/2, Keyless Chuck: No, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Amp/Hour: 1.5, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8, Tool Weight (lbs.): 4.4 Powerstate™ brushless motor delivers up to 650 in.-lbs. of torque with maximum sustained torque to complete the toughest of applications RedLithium™ battery technology provides superior pack construction, electronics and performance to deliver more work per charge and more work over pack life RedLink Plus™ intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger Soft grip for extended use Built-in LED light illuminates work area Two-speed geartrain: 0–550 / 0–1850 RPM 1/2in. metal ratcheting locking chuck Includes 2 M18 Compact RedLithium battery packs and multi-voltage charger

The Milwaukee cordless 2-tool combo kit includes the 1/4in. Hex Impact Driver and the Hackzall™ Reciprocating Saw. Powered by Lithium-Ion batteries, the M12 cordless system offers unmatched power, speed and toolbelt portability. Tools Included: Impact Hammer, Hackzall, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-Ion, Battery Included: Yes, (2) 12V batteries, Charger Included: Yes Impact hammer provides 850 in.-lbs. of torque 2000 RPM, 3000 IPM 1/4in. hex anvil Hackzall with 0–3000 SPM 1/2in. stroke Uses both Hackzall and Sawzall blades All metal gear case Built-in LED lights on both tools

This polisher is fast and powerful for clear coat finishes and excellent for slow polishing, too. Variable speed feature (600-3000 RPM) gives maximum control for buffing. Converts to sander in a snap. Speed (RPM): 0-3,000, Amps: 10, Variable Speed: Yes, Disc Diameter (in.): 7, Tool Length (in.): 18 1/2 Soft start feature for smooth start ups Lock-on button for continuous use 115V Includes hook-and-loop pad and hex wrench Shown with optional buffing bonnet (not included, sold separately) Ideal for ultra slow polishing Electronic speed control maintains constant speed under load Easily converts to a sander 3 prong plug to prevent static electricity accumulation Fast and powerful polishing for clearcoat finishes Wool bonnet 7 in. Spindle thread 5/8 in. - 11 UNC

This variable speed polisher is fast and powerful for clear coat finishes and is ideal for ultra-slow polishing. Electronic speed control maintains constant speed under load. Converts from a polisher to a sander in seconds. Speed (RPM): 3,000, Amps: 10, Variable Speed: Yes, Tool Length (in.): 18 1/2 Easily converts to sander 3-prong plug to prevent static electricity buildup Spindle thread 5/8in. - 11 UNC Fast and powerful polishing for clearcoat finishes Lock-on button for continuous use at one speed Backing pad shown sold separately (Item# 743052) Wool bonnet not included

This lightweight 7.9 Amp polisher has a high power-to-weight ratio for easy control and reduced operator fatigue. Has two speed selections. Variable speed trigger with electronic speed control lets you tailor the speed to the specific application. Speed (RPM): 600 - 1,200, Amps: 7.9, Variable Speed: Yes, OPM: 600 - 1,200 Electronic speed control maintains speed under load Soft start Lock-on button for continuous running Uses hook-and-loop accessories Externally accessible brushes Lightweight design Includes wrench, side handle, hook-and-loop pad, cover and air deflector

If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. Large hole capacity and power to spare make this a good choice for the toughest jobs. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 500, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Case Included: No 1/2in. capacity in steel Reversing Triple-gear reduction Includes chuck key and rubber flex holder

If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. Large hole capacity and power to spare make this a good choice for the toughest jobs. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 500, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes 1/2in. capacity in steel Trigger speed control and reversing Quik-Lok® cord sets detach for tangle-free carrying and storage Includes chuck key and rubber flex holder

If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. High RPMs for use with smaller bits. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 1,000, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes 1/2in. capacity in steel Trigger speed control and reversing Double-gear reduction Includes chuck key and rubber flex holder

If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. Large hole capacity and power to spare make this a good choice for the toughest jobs. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 600, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes 1/2in. capacity in steel Trigger speed control and reversing Triple-gear reduction Includes chuck key and rubber flex holder

If more power is what you need, then look no further than the Milwaukee D-handle line of drills. With 7 amp motors and heat treated metal gears, these are truly the choice of the professional. Large hole capacity and power to spare make this a good choice for the toughest jobs. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 600, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No 1/2in. capacity in steel Trigger speed control and reversing Quik-Lok® cord sets detach for tangle-free carrying and storage Includes chuck key and rubber flex holder

The Chicago Pneumatic 12V cordless drill driver features high and low speed ranges and 25 torque settings to give you all the options you need for drilling and screw driving. Max. Torque (in.-lbs.): 25, Volts: 12, Speed - No Load (RPM): 0–360 / 0–1,300, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: 15, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 1.2, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 9 1/16, Tool Weight (lbs.): 4 1/2 Jacobs industrial locking chuck for secure attachments no matter the job Rubber comfort grip and battery protector LED light for dark work areas

The Milwaukee M18™ Cordless High-Torque Impact Wrench provides heavy-duty power in a compact size. Built with a Milwaukee 4-pole motor and a powerful impact mechanism, this impact wrench delivers the high torque your job demands. Cordless: Yes, Max. Torque (ft.-lbs.): 525, Impacts Per Minute (IPM): 0 – 2,200, Drive (in.): 3/4 hog ring, Speed - No Load (RPM): 0 – 1,900, Reversible: Yes, Volts: 18, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 9, Tool Weight (lbs.): 5.3 Tool only; battery sold separately Powered by an 18V LITHIUM-ION battery (not included) 3/4in. anvil with friction ring provides quick and easy one-handed socket changes

The Milwaukee M18 Cordless Right Angle Drill combines a 3.75in. total head length with an integrated electronic clutch to create the most compact 18V right angle drill driver in the industry. A 3/8in. single sleeve keyless chuck, extended multiposition trigger and up to 125 ft.-lbs of torque provide versatility, ease of use and power that is unmatched. Max. Torque (in.-lbs.): 125, Volts: 18, Speed - No Load (RPM): 0–1,500, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: Yes, 11 + drill, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 3.0, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 11.25, Tool Weight (lbs.): 4.25 Compact drill has 3.75in.L head for working in tight spaces Delivers 125 in.-lbs. of torque 3/8in. single sleeve ratcheting chuck Variable speed, reversible; 0–1500 RPM 11+1 electronic clutch settings Built-in LED lights Extended multiposition handle M18 XC lithium-ion battery for longer run times and increased performance

Bullet Tools Universal Bucket Saw Kit™ converts your favorite jig saw into a lightweight table saw or scroll saw. Now you have one tool to make both rip cuts and corner cuts safely and accurately. Some assembly required. U.S.A. Universal clamping system fits most jig saws Reduces airborne dust Easy to move on the jobsite 16in.L x 20in.W table with adjustable fence

This Milwaukee Spade Handle Drill delivers big power in a compact drill. Made for two-handed operation for drilling large holes or material mixing. 450 RPM operating speed is ideal for large bits or any high-torque operation. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 450, Keyless Chuck: No Powerful 120V AC/DC motor Reversible Keyed chuck Extra-long spade handle and pipe handle for maximum leverage Chrome moly alloy steel gears Triple geartrain Heat-treated gears are heli-cut for quiet performance

The Milwaukee M18 FUEL™ 1/2in. Hammer Drill Kit is a new breed of cordless tool. Utilizing the most advanced technologies in the world, FUEL delivers unrivaled performance in a compact structure. It is built for the most demanding professionals in the world. FUEL delivers up to 10X longer tool life, 25% more power and 50% more runtime. With up to 650 in.-lbs. of torque, the M18™ FUEL™ hammer drill is the most powerful drill in its class. Its new Powerstate™ brushless motor provides unmatched power and sustained torque to complete the toughest of applications. The Powerstate motor outperforms all leading competitors and delivers up to 10X longer motor life for maximum durability. Powered by the durable RedLithium™ battery pack, the M18 FUEL hammer drill delivers up to 50% more run time than the competition. The M18 RedLithium batteries provide longer battery life, with over 5X more recharges than competitors. A battery FUEL™ gauge displays remaining charge for less downtime on the job. This drill driver contains an advanced electronic system with Redlink Plus™ intelligence, which provides total system communication with overload protection. The M18™ FUEL™ hammer drill comes with the new multi-voltage charger, so you can charge all M12™ and M18™ batteries with one charger. A contoured soft grip gives users the ultimate comfort during prolonged use. The hammer drill comes with an all-metal ratcheting locking chuck for maximum grip, bit retention and durability. Tool features an LED light, and is compatible with RedLithium compact and XC battery packs. Max. Torque (in.-lbs.): 650, Volts: 18, Speed - No Load (RPM): 0 - 550 / 0 - 1,850, Chuck Size (in.): 1/2, Keyless Chuck: No, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Amp/Hour: 1.5, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8.1, Tool Weight (lbs.): 4.5 Powerstate™ brushless motor delivers up to 650 in.-lbs. of torque with maximum sustained torque to complete the toughest of applications RedLithium™ battery technology provides superior pack construction, electronics and performance to deliver more work per charge and more work over pack life RedLink Plus™ intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger Soft grip for extended use Built-in LED light illuminates work area Two-speed geartrain: 0–550 / 0–1850 RPM Hammer mode: 31,450 BPM 1/2in. metal ratcheting locking chuck Includes 2 M18 compact RedLithium battery packs and multi-voltage charger

Milwaukee Polishers are built for the professional, with a powerful motor to maintain the right speed. Built for a long life, this tool includes helical gearing, all ball and roller bearings and an aluminum gear case with protective urethane bumpers. Speed (RPM): 0 – 2,800, Amps: 11, Disc Diameter (in.): 7 Exclusive electronic dial speed control; ideal for use on clearcoat finishes Self-stopping long-life brush system Lightweight for use with high-speed liquid machine polishes Balanced, powerful and rugged

Big power in a compact drill, the Milwaukee 1610-1 is easy to use with its extra-long handle. This drill is made for two-handed operation, which is nice for large hole drilling or material mixing, and this drill has the power to handle it. This unit features a 650 RPM operating speed and reverse, a good speed for general purpose use. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 650, Side Handle: Yes, Keyless Chuck: No, Variable Speed: No, Case Included: No 1/2in. capacity in steel

Big power in a compact drill, the Milwaukee 1630-1 is easy to use with its extra-long handles. This drill is made for two-handed operation, which is nice for large hole drilling or material mixing, and this drill has the power to handle it. This unit features a 900 RPM operating speed with reverse, a good speed for smaller bits and less torque applications. U.S.A. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 900, Side Handle: Yes, Keyless Chuck: No, Variable Speed: No, Case Included: No 1/2in. capacity in steel

D-handle power and a right angle drive head make this drill perfect for stud and hoist drilling. Two speed ranges for versatility. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 335 and 750, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: Yes 120 Volt Head and handle swivel 360° and can be locked in any position

Milwaukee Replacement Motor For Panel Saw — 15 Amp, Model# N6486-20 Application: Replacement Motor for Panel Saw, Works With: Panel saw, Amps: 15

The Milwaukee M18 Cordless 1/2in. Hammerdrill/Driver not only delivers an industry-leading compact and ergonomic design, but is up to 20% faster in concrete than the competition. In addition, the 2602-22CT is the only hammerdrill/driver in its class with an all-metal gear case, providing maximum durability for heavy-duty applications. Max. Torque (in.-lbs.): 450, Volts: 18, Speed - No Load (RPM): 0 - 500 / 0 - 1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Battery Amp/Hour: 1.4, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8 1/2, Tool Weight (lbs.): 4.9 0-29,000 BPM Heavy-duty 2-speed metal gearbox Single-sleeve metal chuck Li-Ion batteries for extended run time Built-in LED worklight Compact 8 1/2in. length

Powerful 8.8 AMP motor Quietest sander in its class (85dB) Auto-tracking belt system tracks belt without adjustment Unique design allows flush sanding to the corner of the wall with nose and side of sander Front grip design for comfortable operation Dust bag for a cleaner work environment Optional sanding shoe available for precise sanding depth control Sands wood or metal and removes paint and rust Long 16.4 ft. power cord for easy maneuverability Double insulated Belt size 3in. x 21in. Belt speed 690 - 1,440 ft./min. Overall length 11-5/8in.

This belt sander is the quietest in its class — only 84dB. Preset the maximum belt speed with the electronic speed control and get variable speeds from 690 to 1440 ft. per minute. Unique design lets you sand flush to corners and walls. Amps: 8.8, Variable Speed: Yes, Belt Size (in. x in.): 4 x 24, Belt Speed (ft./min.): 690 - 1,440, Noise Level (dB): 84, Dust Bag Included: Yes Sands flush to corner of wall with nose and side of sander 16.4-foot power cord Auto-tracking belt system Double insulated Includes 1 sanding belt

Kit includes 28 cryogenically hardened hole saws in commonly used sizes. U.S.A. Professional Series: Yes, Bi-Metal: Yes, Saw Size (in.): 3/4in., 7/8in., 1in., 1 1/8in., 1 1/4in., 1 3/8in., 1 1/2in., 1 3/4in., 2in., 2 1/8in., 2 1/4in., 2 1/2in., 2 5/8in., 3in., 3 1/4in., 3 3/8in., 3 5/8in., 3 3/4in., 4in., 4 1/8in., 4 1/4in., 4 1/2in., 4 3/4in., Tooth Style: Optimized tooth form for up to 2 times faster cutting, Ice Hardened: Yes, Off Set Slots: Wide, angled & offset slots for easy plug access, Saw (qty.): 28 Bi-metal construction with 8% cobalt for increased wear resistance

The Makita cordless 1/2in. hammer driver-drill features a Makita-built 4-pole motor that delivers 560 in.-lbs. of Max Torque and 360 in.-lbs. of PTI torque in a compact design. 2-speed drill (0–400 / 0–1700 RPM) covers a wide range of drilling, driving and hammer applications. Compact design is only 9 9/16in. long and weighs only 4.9 lbs. for reduced operator fatigue. 2 trigger-forward built-in LED lights illuminate the work area. Ergonomic shape fits like a glove with even pressure and easy control. Soft grip handle provides increased comfort on the job. LXT Lithium-Ion battery and rapid optimum charger produces 430% total lifetime work with 2.5X more cycles. LXT Lithium-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). 30-minute rapid optimum charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Max. Torque (in.-lbs.): 560, Volts: 18, Speed - No Load (RPM): 0–400 / 0–1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: 16, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Amp/Hour: 3, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 9 9/16, Tool Weight (lbs.): 4.9 30-minute rapid optimum charger has a built-in fan to cool the battery to produce more lifetime work Charger earned the ENERGY STAR® label for meeting strict energy-efficient guidelines set by the EPA and DOE

This belt sander is compact and lightweight for use in close quarters. Belt speed can vary from 656 to 3280 feet per minute for use on many surfaces. Narrow belt and exposed front pulley lets you sand in confined spaces or on irregular shapes. Amps: 5, Variable Speed: Yes, Belt Size (in. x in.): 1 1/8 x 21, Belt Speed (ft./min.): 656 - 3,280 Ball and needle bearing construction Narrow belt and exposed front pulley for close quarters Multi-position side handle for easy operation Lock-on button for continuous use Double insulated Includes 10 sanding belts

COX has established itself as the worlds leading manufacturer of handheld sealant applicators by combining innovative design with excellent manufacturing standards and rigid quality management. The 82010 single-component cordless cartridge applicator meets the needs from the do-it-yourself to the industrial to the most sophisticated specialist markets. Application: Standard 10.3oz. cartridge, Battery Included: Yes, Battery Type: Ni-Cd, Case Included: No, Charger Included: Yes, Cordless: Yes, Volts: 14.4 Capacity: 10oz. cartridge Powered by 14.4V battery pack (included) 745 lbs. maximum force Variable speed control Anti-drip feature All component replaceable parts

Optional attachment for use with Darex V390 sharpener, Item# 3316390. Morse taper chuck attachment can be interchanged without tools. U.S.A.

The Milwaukee M18 FUEL™ 1/2in. Drill/Driver Kit is a new breed of cordless tool. Utilizing the most advanced technologies in the world, FUEL delivers unrivaled performance in a compact structure. It is built for the most demanding professionals in the world. FUEL delivers up to 10X longer tool life, 25% more power and 50% more runtime. With up to 725 in.-lbs. of torque, the M18™ FUEL™ drill/driver is the most powerful drill in its class. Its new Powerstate™ brushless motor provides unmatched power and sustained torque to complete the toughest of applications. The Powerstate motor outperforms all leading competitors and delivers up to 10X longer motor life for maximum durability. Powered by the durable RedLithium™ battery pack, the M18 FUEL drill/driver delivers up to 50% more run time than the competition. The M18 RedLithium batteries provide longer battery life, with over 5X more recharges than competitors. A battery FUEL™ gauge displays remaining charge for less downtime on the job. This drill driver contains an advanced electronic system with Redlink Plus™ intelligence, which provides total system communication with overload protection. The M18™ FUEL™ drill driver comes with the new multi-voltage charger, so you can charge all M12™ and M18™ batteries with one charger. A contoured soft grip gives users the ultimate comfort during prolonged use. The drill driver comes with an all-metal ratcheting locking chuck for maximum grip, bit retention and durability. Tool features an LED light, and is compatible with RedLithium compact and XC battery packs. Max. Torque (in.-lbs.): 725, Volts: 18, Speed - No Load (RPM): 0 - 550 / 0 - 1,850, Chuck Size (in.): 1/2, Keyless Chuck: No, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Amp/Hour: 3.0, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8, Tool Weight (lbs.): 5.0 Powerstate™ brushless motor delivers up to 725 in.-lbs. of torque with maximum sustained torque to complete the toughest of applications RedLithium™ battery technology provides superior pack construction, electronics and performance to deliver more work per charge and more work over pack life RedLink Plus™ intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger Soft grip for extended use Built-in LED light illuminates work area Two-speed geartrain: 0–550 / 0–1850 RPM 1/2in. metal ratcheting locking chuck Includes 2 M18 RedLithium battery packs and multi-voltage charger

D-handle power and a right angle drive head make this Milwaukee drill package perfect for stud and joist drilling. Powerful 7 Amp motor and three speed ranges make this a versatile tool that will handle a wide range of applications. Amps: 7, Chuck Size (in.): 1/2, Speed (RPM): 335 and 750, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: Yes 1/2in. capacity in steel; handles up to 29/16in. selfeed bit For drilling holes in studs, joists and hard-to-reach areas Two speeds: 335 RPM and 750 RPM Head and handle swivel 360°, tight-locking in any position Includes chuck key and holder, side handle, steel carrying case, and accessories for installing/removing right angle head

This 2-pc. Makita 18V compact cordless Lithium-Ion combo kit includes a 2-speed 1/2in. Driver-Drill (0–400 / 0–1500 RPM) with Makita-built 4-pole motor, delivering 480 in.-lbs. of Max Torque and weighing only 3.5 lbs. The variable speed Impact Driver (0–2300 RPM, 0–3200 IPM) provides 1280 in.-lbs. of Max Torque in a compact design and weighs only 2.8 lbs. Makita Lithium-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power). 15-minute Rapid Optimum Charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Charger also has a built-in fan to cool the battery which helps produce more lifetime work. Tools Included: 2: drill-driver, impact driver, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-Ion, Battery Included: Yes (2), Charger Included: Yes Charger earned the ENERGY STAR® label for meeting strict energy-efficient guidelines set by the EPA and DOE

This powerful belt sander features an extended base to allow flush sanding to walls. The wide belt removes material quickly for high production. And its quiet, only generating 84dB in use. Amps: 11, Belt Size (in. x in.): 4 x 24, Noise Level (dB): 84, Dust Bag Included: Yes Low profile for balance and less gouging Large front grip for operator comfort Extended base allows flush sanding Replaceable ceramic wear plate Lever control for easy belt changes Double insulated Dust bag swivels 360° Includes 1 sanding belt

The Milwaukee® M12™ cordless 3-tool combo kit includes an electric screwdriver, 3/8in. impact wrench and flashlight. Screwdriver has the power to drive most common small fasteners and the run time for a full day of screwdriving without recharging. 3/8in. impact wrench delivers up to 1000 in.-lbs. of torque in a compact lightweight design. Flashlight with Xenon bulb provides handsfree light in a small package. The innovative M12 cordless system is designed to deliver the power and torque required for professional applications in a size that reaches the tightest and toughest places. Powered by Lithium-Ion batteries, the M12 cordless system offers unmatched power, speed and tool belt portability. Tools Included: Screwdriver, 3/8in. impact wrench, flashlight, Storage Case Included: Yes, Volts: 12, Battery Type: Lithium-Ion, Battery Included: Yes (2), Charger Included: Yes Cordless screwdriver Quick bit-loading 1/4in. hex chuck for bit insertion and release with one hand Battery fuel gauge for displaying remaining run time Metal gear housing for jobsite durability Built-in LED for illumination of dark work areas Variable speed trigger (0–500 RPM) for output power control 150 in.-lbs. of torque Overmold side and grip for secure grip and work surface protection Cordless 3/8in. impact wrench Powerful impact mechanism delivers up to 1000 in.-lbs. of torque 0–2200 RPM; 0–3000 IPM Compact design is tool belt portable at only 2.3 lbs. 3/8in. square anvil with friction ring retention for easy socket insertion/release and increased durability Onboard fuel gauge displays remaining run time Built-in LED illuminates work surface Cordless flashlight 90° pivoting head Ergonomic, compact and lightweight design for operator comfort Integrated magnet

COX has established itself as the worlds leading manufacturer of handheld sealant applicators by combining innovative design with excellent manufacturing standards and rigid quality management. The 82029 single-component cordless cartridge applicator meets the needs from the do-it-yourself to the industrial to the most sophisticated specialist markets. Application: Standard 29oz. cartridge, Battery Included: Yes, Battery Type: Ni-Cd, Case Included: No, Charger Included: Yes, Cordless: Yes, Volts: 14.4 Capacity: 29oz. cartridge Powered by 14.4V battery pack (included) 745 lbs. maximum force Variable speed control Anti-drip feature All component replaceable parts

For use with JET milling/drilling machines Item#s 144553 and 144554.

Great features and a great price make this bridge tile saw the right choice for you. 1-year limited warranty. HP: 1 1/2, Speed - No Load (RPM): 1,100, Engine Speed (RPM): 3,550, Cutting Length (in.): 24, Cutting Thickness (in.): 1 3/4, Blade Diameter (in.): 8, Arbor Size (in.): 5/8 120 Volts 60 Hz 9.2 Amps 18in. diagonal cut

COX has established itself as the worlds leading manufacturer of handheld sealant applicators by combining innovative design with excellent manufacturing standards and rigid quality management. The 82600 single-component cordless sausage applicator meets the needs from the do-it-yourself to the industrial to the most sophisticated specialist markets. Application: Standard 20oz. cartridge, Battery Included: Yes, Battery Type: Ni-Cd, Case Included: No, Charger Included: Yes, Cordless: Yes, Volts: 14.4 Capacity: 20oz. sausage Powered by 14.4V battery pack (included) 745 lbs. maximum force Variable speed control Anti-drip feature All component replaceable parts

Milwaukee® multi-layered Realtree AP™ camo jacket uses 12V RedLithium™ battery and advanced cold weather technology to actively warm the body and stimulate blood circulation. Has 3 carbon fiber heating zones to distribute heat to core and 3 heat settings for varying cold-weather conditions. Water- and wind-resistant jacket delivers continuous heat for up to 6 hours per charge. Great for hunting or on the jobsite. You also get a 12V cordless lithium-ion 1/4in. screwdriver with that delivers up to 150 in.-lbs. of torque, 0–500 RPM and extra-long run time to handle a variety of screwdriving tasks. Has 1/4in. hex chuck, metal gear housing and built-in LED light. Kit includes jacket, screwdriver, two 12V Redlithium batteries, charger and storage bag. Tools Included: Cordless screwdriver, heated camo jacket, Storage Case Included: Yes, Volts: 12, Battery Type: M12 Red Li-Ion, Battery Included: Yes (2), Charger Included: Yes Jacket Up to 6 hours run time per battery charge Water and wind resistant 3 heat zones, 3 heat settings Easy touch heat controller in lapel Realtree AP™ pattern Fabric blend reduces noise during movement Expandable battery pouch holds M12 compact or M12 XC battery pack Back tag patch displays license M12 Li-Ion battery is compatible with over 30 Milwaukee cordless tools Screwdriver 1/4in. hex chuck for quick one-handed bit insertion and release Battery fuel gauge shows remaining run time Metal gear housing Built-in LED Variable speed trigger Overmold side and grip for secure grip

Milwaukee® multi-layered Realtree AP™ camo jacket uses 12V RedLithium™ battery and advanced cold weather technology to actively warm the body and stimulate blood circulation. Has 3 carbon fiber heating zones to distribute heat to core and 3 heat settings for varying cold-weather conditions. Water- and wind-resistant jacket delivers continuous heat for up to 6 hours per charge. Great for hunting or on the jobsite. You also get a 12V cordless lithium-ion 1/4in. screwdriver with that delivers up to 150 in.-lbs. of torque, 0–500 RPM and extra-long run time to handle a variety of screwdriving tasks. Has 1/4in. hex chuck, metal gear housing and built-in LED light. Kit includes jacket, screwdriver, two 12V Redlithium batteries, charger and storage bag. Tools Included: Cordless screwdriver, heated camo jacket, Storage Case Included: Yes, Volts: 12, Battery Type: M12 Red Li-Ion, Battery Included: Yes (2), Charger Included: 1 Jacket Up to 6 hours run time per battery charge Water and wind resistant 3 heat zones, 3 heat settings Easy touch heat controller in lapel Realtree AP™ pattern Fabric blend reduces noise during movement Expandable battery pouch holds M12 compact or M12 XC battery pack Back tag patch displays license M12 Li-Ion battery is compatible with over 30 Milwaukee cordless tools Screwdriver 1/4in. hex chuck for quick one-handed bit insertion and release Battery fuel gauge shows remaining run time Metal gear housing Built-in LED Variable speed trigger Overmold side and grip for secure grip

Milwaukee® multi-layered Realtree AP™ camo jacket uses 12V RedLithium™ battery and advanced cold weather technology to actively warm the body and stimulate blood circulation. Has 3 carbon fiber heating zones to distribute heat to core and 3 heat settings for varying cold-weather conditions. Water- and wind-resistant jacket delivers continuous heat for up to 6 hours per charge. Great for hunting or on the jobsite. You also get a 12V cordless lithium-ion 1/4in. screwdriver with that delivers up to 150 in.-lbs. of torque, 0–500 RPM and extra-long run time to handle a variety of screwdriving tasks. Has 1/4in. hex chuck, metal gear housing and built-in LED light. Kit includes jacket, screwdriver, two 12V Redlithium batteries, charger and storage bag. Tools Included: Cordless screwdriver, heated camo jacket, Storage Case Included: Yes, Volts: 12, Battery Type: M12 Red Li-Ion, Battery Included: Yes, 2, Charger Included: Yes Jacket Up to 6 hours run time per battery charge Water and wind resistant 3 heat zones, 3 heat settings Easy touch heat controller in lapel Realtree AP™ pattern Fabric blend reduces noise during movement Expandable battery pouch holds M12 compact or M12 XC battery pack Back tag patch displays license M12 Li-Ion battery is compatible with over 30 Milwaukee cordless tools Screwdriver 1/4in. hex chuck for quick one-handed bit insertion and release Battery fuel gauge shows remaining run time Metal gear housing Built-in LED Variable speed trigger Overmold side and grip for secure grip

The Milwaukee M18 cordless 1/2in. Hammerdrill/Driver not only delivers an industry-leading compact and ergonomic design, but is up to 20% faster in concrete than the competition. In addition, the 2602-22 is the only hammerdrill/driver in its class with an all-metal gear case, providing maximum durability for heavy duty applications. Max. Torque (in.-lbs.): 550, Volts: 18, Speed - No Load (RPM): 0 - 500 / 0 - 1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Battery Amp/Hour: 2.8, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8 1/2, Tool Weight (lbs.): 4.9 0-29,000 BPM Heavy-duty 2-speed metal gearbox Single-sleeve metal chuck Red Lithium Li-Ion batteries for extended run time Built-in LED worklight Compact 8 1/2in. length

The Milwaukee™ M18 cordless 2-tool combo kit includes the Compact Driver (2601-20) and the 1/4in. Hex Impact Driver (2650-20). Powered by Li-Ion batteries, the M18 Series revolutionary redesign of Lithium-Ion battery technology allows Milwaukee tools to deliver more power with faster speeds and longer tool run times, and are lighter and more compact, which eliminates user fatigue and improves overall work. Tools Included: (1) Compact drill/driver, (1) Impact wrench, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-ion 1.5 amp 18Volt, Battery Included: Yes (2), Charger Included: Yes 2601-22 Compact Drill High torque with 400 ft.-lbs. All metal 1/2in. single sleeve ratcheting chuck 4-pole frameless motor Fuel gauge lets you easily see how much battery life is left for the job Built-in LED light illuminates work area, making it easier to see in dark tight spots Compact size weighs only 4 lbs., allowing longer operation without fatigue 2650-22 1/4in. Hex Impact Driver The 1/4in. hex quick-change chuck allows for fast and easy bit changes The Milwaukee-designed impact mechanism delivers the force of the impact directly to the fastener allowing for faster application speed Milwaukee-designed 4-pole frameless motor allows tool to be more efficient by increasing the run time On-board battery fuel gauge allows you to see the remaining run time with a touch of a button Built-in LED light illuminates work surface offering a clear view of your work area The variable speed feather touch trigger allows the end user complete control over the impact speed The newly designed 18V Compact LITHIUM-ION battery delivers a longer run time and a prolonged tool life Charger can charge batteries in an hour Pass-through plug design for added outlet availability

The 1/4in. hex quick-change chuck allows for easy bit changes while a variable-speed trigger provides increased user control. The lightweight and compact design minimizes user fatigue. Features two M18 Red Lithium XC High-Capacity LITHIUM-ION batteries for longer life and extended run time. Cordless: Yes, Max. Torque (ft.-lbs.): 116, Impacts Per Minute (IPM): 3,200, Drive (in.): 1/4, Speed - No Load (RPM): 2,200, Volts: 18, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 5 3/4, Tool Weight (lbs.): 3.2 Heavy-duty motor delivers 116 ft.-lbs. of torque Variable speed trigger; 0–2200/0–3200 IPM 1/4in. hex quick-change chuck Built-in LED light Lightweight, compact design

The Milwaukee M18 FUEL™ 1/2in. Hammer Drill Kit is a new breed of cordless tool. Utilizing the most advanced technologies in the world, FUEL delivers unrivaled performance in a compact structure. It is built for the most demanding professionals in the world. FUEL delivers up to 10X longer tool life, 25% more power and 50% more runtime. With up to 725 in.-lbs. of torque, the M18™ FUEL™ hammer drill is the most powerful drill in its class. Its new Powerstate™ brushless motor provides unmatched power and sustained torque to complete the toughest of applications. The Powerstate motor outperforms all leading competitors and delivers up to 10X longer motor life for maximum durability. Powered by the durable RedLithium™ battery pack, the M18 FUEL hammer drill delivers up to 50% more run time than the competition. The M18 RedLithium batteries provide longer battery life, with over 5X more recharges than competitors. A battery FUEL™ gauge displays remaining charge for less downtime on the job. This drill driver contains an advanced electronic system with Redlink Plus™ intelligence, which provides total system communication with overload protection. The M18™ FUEL™ hammer drill comes with the new multi-voltage charger, so you can charge all M12™ and M18™ batteries with one charger. A contoured soft grip gives users the ultimate comfort during prolonged use. The hammer drill comes with an all-metal ratcheting locking chuck for maximum grip, bit retention and durability. Tool features an LED light, and is compatible with RedLithium compact and XC battery packs. Max. Torque (in.-lbs.): 725, Volts: 18, Speed - No Load (RPM): 0 - 550 / 0 - 1,850, Chuck Size (in.): 1/2, Keyless Chuck: No, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Amp/Hour: 3.0, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8.1, Tool Weight (lbs.): 5.0 Powerstate™ brushless motor delivers up to 725 in.-lbs. of torque with maximum sustained torque to complete the toughest of applications RedLithium™ battery technology provides superior pack construction, electronics and performance to deliver more work per charge and more work over pack life RedLink Plus™ intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger Soft grip for extended use Built-in LED light illuminates work area Two-speed geartrain: 0–550 / 0–1850 RPM Hammer mode: 31,450 BPM 1/2in. metal ratcheting locking chuck Includes 2 M18 RedLithium XC battery packs and multi-voltage charger

Powered by lithium-ion technology, this Milwaukee Impact Wrench delivers best-in-class fastening speed. Its compact size reduces fatigue without sacrificing power. 3/8in. anvil with friction ring offers quick and easy one-handed socket changes to increase productivity. Cordless: Yes, Max. Torque (ft.-lbs.): 166.7, Impacts Per Minute (IPM): 0-3,200, Drive (in.): 3/8, Speed - No Load (RPM): 0 – 2,200, Reversible: Yes, Volts: 18, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 5.75, Tool Weight (lbs.): 4.1 Milwaukee 4-Pole frameless motor for maximum efficiency and run time Built-in LED light illuminates work surface Heavy-duty die-cast aluminum, gear housing

Powered by lithium-ion technology, this Milwaukee Impact Wrench delivers best-in-class fastening speed. Its compact size reduces fatigue without sacrificing power. 1/2in. anvil with friction ring offers quick and easy one-handed socket changes to increase productivity. Cordless: Yes, Max. Torque (ft.-lbs.): 183.3, Impacts Per Minute (IPM): 0-3,200, Drive (in.): 1/2, Speed - No Load (RPM): 0 – 2,200, Reversible: Yes, Volts: 18, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 5.75, Tool Weight (lbs.): 4.1 Milwaukee 4-Pole frameless motor for maximum efficiency and run time Built-in LED light illuminates work surface Heavy-duty die-cast aluminum, gear housing

This Makita tool combo includes a powerful 1/2in. driver drill, impact driver and xenon flashlights, with powerful 18V lithium-ion batteries to keep you on the job. Tools Included: (1) Drill driver, (1) Flashlight, (1) Impact driver, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-ion, Battery Included: Yes (2), Charger Included: Yes 1/2in. driver-drill delivers 450 in.-lbs. of torque Impact driver provides 1280 in.-lbs. of torque Xenon rechargeable flashlight with pivoting 4-position head 18V Lithium-ion batteries provide longer run time and less self-discharge

Power and torque, thats about all that needs to be said about the Hole Hawg® line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. An extra-long pipe handle helps you control the power. Amps: 7.5, Chuck Size (in.): 1/2, Speed (RPM): 900, Side Handle: Yes, Keyless Chuck: No, Case Included: No 1/2in. capacity in steel Handles up to 29/16in. selfeed bit Reversing Triple gear reduction

Amps: 15, Cutting Capacity - 0 Degree Miter: 2 3/4in.H x 5 1/8in.D, Blade Diameter (in.): 10, Bevel: No, Speed - No Load (RPM): 4,600, Total Positive Miter Stops: 9, Max. Degree Miter Cuts - Left: 45, Max. Degree Miter Cuts - Right: 52, Total Positive Bevel Stops: 9, Max. Degree Bevel Cuts - Left: 0 - 45, Max. Degree Bevel Cuts - Right: 0 - 52, Laser Guide: No, Blade Included: Yes, Wrench Included: Yes, Dust Bag Included: Yes Positive stops at 9 settings: 15°, 22.5°, 30°, 45° right or left Shaft lock for easy blade changes Double insulated Model LS1040

Cuts with razor-sharp precision without sparks, smoke or slag. No deburring or milling needed. Requires no coolant; material stays cool to the touch. Metal chip collector keeps work area clean. On-board wrench storage for quick blade changes. Wheel Diameter (in.): 14, Amps: 15, Speed - No Load (RPM): 1,300, Handle: D-Handle, Vise: Quick-release, pivoting, Base: Steel with rubber feet, Wheel Included: Yes, Wheel Change Wrench Included: Yes, Shaft Lock: Yes Includes blade wrench and 14in. 72T blade Model RP2814A

The Makita® LXT Combo Kit includes the 2-speed 1/2in. Hammer Driver-Drill with Makita-built 4-pole motor that delivers 450 in.-lbs. of max torque and the variable-speed Impact Driver with 1330 in.-lbs. of max torque. in a lightweight, compact design. LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5X more cycles! Tools Included: Hammer drill-driver, Impact driver, Storage Case Included: Yes, Volts: 18, Battery Type: Li-Ion, Battery Included: Yes (2), Charger Included: Yes Hammer Driver-Drills 2-speed design (0–400 / 0–1500 RPM) covers a wide range of drilling, driving and hammer applications Lightweight, compact design for reduced operator fatigue Built-in LED light illuminates the work area 0–6000 BPM (Low) and 0–22,500 BPM (High) Impact Driver has variable speed (0–2300 RPM & 0–3200 IPM) for a wide range of fastening applications Convenient 1-touch 1/4in. hex chuck for simple bit insertion Makita Li-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power) 30-minute Rapid Optimum Charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature 30-minute Rapid Optimum Charger has a built-in fan to cool the battery which helps produce more lifetime work

This powerful 13 Amp metal cutting saw features innovative dry-cut technology that provides faster, cleaner and more affordable metal cutting. 120 Volt AC with 3700 RPM no-load speed. Has an exclusive quick-release blade shield latch as well as sight-line and blade point-of-entry indicators. Cordless: No, Blade Diameter (in.): 8, Amps: 13, Speed - No Load (RPM): 3,700, Cutting Depth at 90° (in.): 2 9/16, Blade Location: Right, Blade Included: Yes, Wrench Included: Yes, Case Included: Yes Plunge lever Durable stainless steel shoe Soft-grip handle 15ft. fixed cord

Power and torque, thats about all that needs to be said about the Hole Hawg® line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. This unit will handle up to a 4 5/8in. Selfeed Bit. An extra-long pipe handle helps you control the power. Features two speed ranges and reverse, 1200 and 300 RPM, this will greatly increase the versatility of this drill. Hi-torque and hi-speed make this the perfect choice for the heavy-duty user. Amps: 7.5, Speed (RPM): 300 and 1,200, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: Yes

The Milwaukee® M18™ Cordless Lithium-Ion 1/2in. Hammer Drill Driver is the most compact hammer drill driver in its class and is up to 20% faster in concrete than the competition. Built with a Milwaukee 4-pole frameless motor, this hammer drill delivers 550 in.-lbs. of peak torque with the M18 XC High Capacity Lithium-Ion battery. This tool is the only hammer drill driver in its class with an all metal gear case, providing maximum durability for heavy-duty applications. In addition, this cordless tool includes the M18 AC/DC wall and vehicle charger allowing the user to charge their M18 Lithium-Ion battery in the work truck or on the jobsite. Max. Torque (in.-lbs.): 550, Volts: 18, Speed - No Load (RPM): 0–450 & 0–1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 3.0, Battery Included: Yes, 2, Charger Included: Yes, AC/DC, Case Included: Yes, Tool Length (in.): 8 1/2, Tool Weight (lbs.): 4 7/8 Delivers 550 in.-lbs of peak torque, 0-450/0-1700 RPM, & 29,000 BPM M18 Wall and Vehicle Charger with AC/DC compatibility DPM™ overload protection prevents damage to the tool and battery in abusive situations Works with M18 XC High Capacity Redlithium™ batteries and M18 Compact Redlithium™ batteries

Replacement wheel used for splitting the point on HSS and cobalt drill bits when used with XT3000 Tool-Drill Sharpener, Item# 3316900. Splits the point on approx. 5000 bits before needing replacement. Long-lasting, 100-grit wheel does not require dressing. U.S.A.

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Diamond-point split wheel attachment can be interchanged without tools. U.S.A.

Powerful Super Hawg® 13 Amp drill with Milwaukee-built motor is perfect for drilling holes of all sizes in wood frame construction. Low speed clutch. Fast drilling with 1750 RPM high; 450 RPM low. 3-position Roto-Lok® rear handle with 90° left-right rotation. Amps: 13, Chuck Size (in.): 1/2, Speed (RPM): 1,750, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes

This 2-pc. Makita 18V LXT Lithium-Ion cordless combo kit includes a hammer driver-drill and an impact driver. The 2-speed 1/2in. Hammer Driver-Drill (0–400 / 0–1700 RPM) with Makita-built 4-pole motor delivers 560 in.-lbs. of Max Torque and weighs only 4.9 lbs. Variable speed Impact Driver (0–2300 RPM) provides 1330 in.-lbs. of Max Torque in a compact design and weighs only 3.4 lbs. Makitas LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5X more cycles. Lithium-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power) 30-minute rapid optimum charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Charger also has a built-in fan to cool the battery which helps produce more lifetime work. Tools Included: 2: hammer drill-driver, impact driver, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-Ion, Battery Included: Yes (2), Charger Included: Yes Charger earned the ENERGY STAR® label for meeting strict energy-efficient guidelines set by the EPA and DOE

This dual-speed tile saw features an enclosed dual-spray water system for evenly distributed water flow. Great for cutting all kinds of tile, including marble, granite, porcelain and other masonry products. HP: 2, Speed - No Load (RPM): 1750/2450, Cutting Thickness (in.): 3 1/4, Blade Diameter (in.): 10 15 Amp motor 24in. rip cut, 14in. diagonal cut Angle/rip guide and miter block for fast and consistent cuts Thermal overload protection

The Makita Cordless LXT Li-Ion 18V 18 Gauge Straight Shear cuts up to 18-gauge mild steel and 20-gauge stainless steel. Swivel shear head rotates 360° for increased cutting options and added convenience. This is a compact, lightweight tool for fast, precise cutting of sheet metal. LXT lithium-ion battery and rapid optimum charger (both sold separately) produce 430% total lifetime work with 3X more cycles! SAVE MONEY by replacing or adding specific tools that work with the Makita LXT Lithium-Ion battery and charger you already own. The Makita 18V bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Makita bare tool to your 18 Volt cordless system today. Cordless: Yes, Volts: 18, Cutting Capacity Mild Steel (gauge): 18, Cutting Capacity Stainless Steel (gauge): 20, Strokes Per Minute (SPM): 0 – 2,800, Head Swivel (deg.): 360, Battery Included: No, Charger Included: No, Case Included: No Tool only; battery and charger not included Makita-built 4-pole motor delivers 2800 strokes per minute for fast cutting Cuts up to 18-gauge mild steel and 20-gauge stainless steel Swivel shear head rotates 360° for increased cutting options and added convenience Compact design at only 13 3/4in. long and weighs only 5.3 lbs. with battery for reduced operator fatigue Reversible belt clip attaches to either side of the tool Ergonomic shape fits like a glove with even pressure and easy control Soft grip handle provides increased comfort on the job LXT lithium-ion battery produces more lifetime work

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Diamond wheel attachment can be interchanged without tools. U.S.A.

Replacement wheel used for splitting the point on HSS and cobalt drill bits when used with XT3000 Tool-Drill Sharpener, Item# 3316900. Sharpens approx. 5000 bits before needing replacement. Long-lasting, 180-grit wheel does not require dressing. U.S.A.

The Milwaukee M18™ High Performance Drill/Driver delivers revolutionary power, run time and ergonomics. The new Milwaukee 4-Pole Frameless Motor generates a best-in-class 650 in.-lbs. of torque to meet the application rigors of the jobsite. Utilizing the new 18V XC high-capacity LITHIUM-ION battery, the 2610-24 delivers up to 65% more holes per charge. Max. Torque (in.-lbs.): 650, Volts: 18, Speed - No Load (RPM): 0 - 450 / 0 - 1,800, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: 24, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Amp/Hour: 2.8, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes Powered by a M18 Red Lithium XC battery (included) Easy-to-use 1/2in. single-sleeve ratcheting metal chuck with carbide jaws for maximum grip Built-in LED light illuminates work surface

The Chicago Pneumatic 12V cordless drill driver features high and low speed ranges and 25 torque settings to give you all the options you need for drilling and screw driving. Includes 2 lightweight Lithium-Ion batteries that keep power throughout the charge. Max. Torque (in.-lbs.): 25, Volts: 12, Speed - No Load (RPM): 1,300, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: 15, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 12, Battery Included: Yes, (2) Li-Ion, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 9 1/16, Tool Weight (lbs.): 4 1/2 Jacobs industrial locking chuck for secure attachments no matter the job Rubber comfort grip and battery protector LED light for dark work areas

The Milwaukee M18™ Cordless Jig Saw delivers accuracy, versatility and ease of use. The 5-position orbital setting offers more cutting versatility than any other cordless jig saw on the market. This allows the user to select the type of cut or speed specific to their application. For ease of use, the tool-free shoe bevel allows for quick and accurate shoe adjustments, while the QuickLok™ blade clamp provides fast and easy blade change. Cordless: Yes, Volts: 18, Strokes Per Minute (SPM): 2,200, Total Orbital Settings: 5, Bevel Cuts: Yes, Stroke Length (in.): 1, Variable Speed: Yes, Trigger Lock: Yes, Dust Blower: Yes, Dust Cover: Yes, Blade Included: Yes, Wrench Included: No, Battery Included: Yes (2), Case Included: Yes Tool-free shoe bevel allows for quick and accurate shoe adjustments The tool-free shoe bevel with positive stops allows for a maximum 45° bevel in either direction with detents at 0, 15, 30, and 45 degrees Quick-Lok™ blade clamp provides fast and easy blade change Over-molded grip with variable speed trigger provides optimal control for cutting a variety of materials Non-marring shoe protects the work surface from damage

LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles. Compact design at only 9 3/8in. length and weighs only 4.6 lbs. for less operator fatigue. Max. Torque (in.-lbs.): 560, Volts: 18, Speed - No Load (RPM): 0-300/0-600/0-1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Amp/Hour: 3.0Ah, Battery Included: Yes, (2) LXT Lithium-Ion batteries, Charger Included: Yes, 30-minute charger, Case Included: Yes Makita-built, 4-pole maximum torque motor delivers 560in.-lbs. of efficient torque in a compact size Ergonomic shape fits like a glove with even pressure and easy control LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power) 30-minute Rapid Charger uses &Quot;Active 3 Control&Quot; for current control, thermal control & voltage control Rapid Charger has a built-in fan to cool the battery to produce more lifetime work Two built-in LED lights for more illuminated work 3-speed design produces 25% faster working speed with more efficiency in a wider range of applications 2-pc. armature and field along with externally accessible brushes for serviceability and longer motor life Model BDF451

Powerful 13 Amp Milwaukee built motor. Perfect for drilling holes of all sizes in wood frame construction. Low speed clutch. Fast drilling with 1750 RPM high; 450 RPM low. 3-position Roto-Lok™ rear handle with 90° left-right rotation. Includes side handle, 8ft. 3-wire fixed rubber cord, and impact-resistant carrying case. U.S.A. Amps: 13, Chuck Size (in.): 1/2, Speed (RPM): 450 and 1750, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: Yes

This cordless jig saw features a 18 Volt, 2.6 Ah battery for powerful performance. Accepts tang, Makita and universal shank blades. U.S.A. Cordless: Yes, Volts: 18, Strokes Per Minute (SPM): 500-2,800, Total Orbital Settings: 3, Bevel Cuts: Yes, up to 45° left or right, Stroke Length (in.): 1, Variable Speed: Yes, Trigger Lock: Yes, Dust Cover: Yes, Blade Included: Yes, (1) blade set, Battery Included: Yes, (1) 18V Ni-MH battery, Case Included: Yes Powerful two-piece motor with replaceable armature for longer life Electronic variable speed control dial for precise speed control 18V (2.6Ah) Nickel-Metal Hydride battery runs up to 2 times longer than competitive models Maximum cutting depth: In wood, 5 5/16in. Mild steel, 3/8in. Cast aluminum base Externally accessible brushes Comfortable top handle design Model 4334DWD

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Left-hand chuck attachment can be interchanged without tools. U.S.A.

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Left-hand chuck attachment can be interchanged without tools. U.S.A.

The Milwaukee M18™ cordless 2-tool combo kit includes the 1/2in. Hammerdrill/Driver (2602-20) and Impact Driver with 1/4in. hex (2650-20). The M18 Cordless Systems M18 Red Lithium battery, patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Tools Included: Hammerdrill/ Impact Driver, Storage Case Included: Yes, Volts: 18, Battery Type: Li-Ion, Battery Included: Yes (2), Charger Included: Yes Hammerdrill/Driver 4-pole frameless motor 550 in.-lbs. of peak torque 0–450/0–1700 RPM 29,000 BPM Impact Driver 1/4in. hex Milwaukee-designed impact mechanism 1400 in.-lbs. torque Both tools feature DPM™ (Digital Power Management): Overload protection that prevents damage to the tool and battery in abusive situations Both tools work with M18 Red Lithium XC High Capacity Li-Ion batteries and M18 Red Lithium Compact Li-Ion batteries

This fast-cutting 14-gauge Shear can handle the toughest jobs — even cuts stainless steel up to 16 gauge! Scroll cuts are a snap with the easy-to-hold back handle design. Easily adjusted blades make for easy work adjustment. The Milwaukee cutting shear will leave a smooth, burr-free edge, ready to be finished. A handy tool for metal working, and can be used for any metal fabrication application. Cordless: No, Amps: 5, Volts: 120, Cutting Capacity Steel (gauge): 14, Cutting Capacity Stainless Steel (gauge): 16, Strokes Per Minute (SPM): 4,000 Clear unobstructed visibility Cuts close curves either left or right Blade design eliminates jamming Blade adjustment requires no shims Leaves a smooth, burr-free edge Includes Allen wrench, feeler gauge, upper blade and lower blade

The Milwaukee 1/2in. High Torque Impact Wrenches provide industry-leading power in a compact size. Built with a Milwaukee 4-pole motor and a powerful impact mechanism, this tool was built with the torque to take on any job. Cordless: Yes, Max. Torque (ft.-lbs.): 450, Impacts Per Minute (IPM): 0 – 2,200, Drive (in.): 1/2, Speed - No Load (RPM): 0 – 1,900, Reversible: Yes, Volts: 18, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8 7/8, Tool Weight (lbs.): 6.7 1/2in. anvil with detent pin for socket retention

The M18 Cordless 1/2in. high-torque impact wrench provides industry-leading power in a compact size. Built with a Milwaukee 4-pole motor and a powerful impact mechanism, this impact wrench delivers the torque your job demands. Cordless: Yes, Max. Torque (ft.-lbs.): 450, Impacts Per Minute (IPM): 0 – 2,200, Drive (in.): 1/2, Speed - No Load (RPM): 0 – 1,900, Reversible: Yes, Volts: 18, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 8 7/8, Tool Weight (lbs.): 6.7 1/2in. anvil with friction ring for quick and easy one-handed socket changes

LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles. Compact design at only 19 5/8in. length and weighs only 8.1 lbs. for less operator fatigue. Cordless: Yes, Volts: 18, Stroke Length (in.): 1 1/8, Strokes Per Minute (SPM): 2,900, Tool Length (in.): 19 5/8, Tool Weight (lbs.): 8.1, Battery Included: (1) 18V LXT lithium, Charger Included: Yes, 45 Minute, Case Included: Yes Ergonomic shape fits like a glove with even pressure and easy control LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power) Optimum Charger has a built-in fan to cool the battery to produce more lifetime work Two built-in LED lights for more illuminated work One-handed, fast tool-less blade changes and shoe adjustments Retractable sky hook for hanging on rafters 2-pc. armature and field along with externally accessible brushes for serviceability and longer motor life

This Makita 12in. compound miter saw can cut crown molding up to 5 1/2in. tall. Its powerful 15 Amp motor delivers 4000 RPM for fast, precise cutting. Features positive stops at 9 settings for convenience and accuracy. Horizontal D-handle design for easy and comfortable operation. Fence pivots to support larger stock. U.S.A. Amps: 15, Cutting Capacity - 0 Degree Miter: 3 7/8in.H x 6in.D, Blade Diameter (in.): 12, Speed - No Load (RPM): 4,000, Total Positive Miter Stops: 9, Max. Degree Miter Cuts - Left: 45, Max. Degree Miter Cuts - Right: 45, Fence: Pivoting, Laser Guide: No, Blade Included: Yes, Wrench Included: Yes, Dust Bag Included: Yes 4 1/2in. tall pivoting fence for cutting up to 5 1/2 in. crown molding Positive stops at 9 settings: 15°, 22.5°, 31.6°, 45° right or left Horizontal D-handle design Pivoting fence for supporting larger stock

LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles. Compact design at only 13 5/8in. length and weighs only 7.1 lbs. for less operator fatigue. Cordless: Yes, Blade Diameter (in.): 6 1/2, Volts: 18, Speed - No Load (RPM): 3,700, Bevel Capacity (deg): 50, Blade Location: Left, Arbor Size (in.): 5/8, Blade Included: Yes, Wrench Included: Yes, Battery Included: Yes, (2) 18V LXT Lithium-Ion batteries, Charger Included: Yes, 45-minute charger, Case Included: Yes Makita-built, D35 high-torque motor delivers maximum power for cutting 2x material Ergonomic shape fits like a glove with even pressure and easy control LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power) 45-minute Optimum Charger uses &Quot;Active 3 Control&Quot; for current control, thermal control & voltage control Optimum Charger has a built-in fan to cool the battery to produce more lifetime work Two built-in LED lights for more illuminated work Heavy-gauge, precision-machined base for smooth, accurate cutting and added durability Built-in dust blower enhances line of sight and keeps work piece clean 2-pc. armature and field along with externally accessible brushes for serviceability and longer motor life Model BSS610

From QEP, this professional-quality bridge saw is ideal for cutting large porcelain, ceramic, granite, stone, marble and travertine tiles. HP: 2, Engine Speed (RPM): 3260, Cutting Length (in.): 30, Cutting Thickness (in.): 1 1/2in. 10.5 Amps Dependable motor rips through 30in. tile and cuts 22in. tile diagonally Cutting assembly glides on 6 ball bearings for precision cuts Use for plunge cutting, miter cuts, rip/angle cuts Low maintenance water tray is built into saw frame Unique hose coupling allows for easier drainage or fill-ups with a garden hose Has 2 sets of wheels and an extendable handle

The Chicago Pneumatic 3/8in. cordless impact wrench is the smallest 3/8in. available. It delivers 95 ft.-lbs. of Ultimate Torque to handle tough fastening jobs in tight spaces. Comes with 2 lightweight Lithium-Ion batteries that keep power throughout the charge. Cordless: Yes, Max. Torque (ft.-lbs.): 95, Drive (in.): 3/8, Speed - No Load (RPM): 2,400, Reversible: Yes, Volts: 12, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 6 1/2, Tool Weight (lbs.): 3 1/2 LED light for dark work areas Easy change sliding battery Rubber comfort grip and battery protector

The Milwaukee M18™ cordless 2-tool combo kit includes the 1/2in. Compact Hammerdrill/Driver and Sawzall® Reciprocating Saw. The M18™ Cordless Systems patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Tools Included: Hammerdrill/driver, Sawzall recip saw, Storage Case Included: Yes, Volts: 18, Battery Type: Li-Ion, Battery Included: Yes (2), Charger Included: Yes 1/2in. hammerdrill/driver (Model 2602-20) delivers 550 in.-lbs. peak torque at 0–450/0–1700 RPM and 29,000 BPM Sawzall (Model 2620-20) has a variable-speed trigger and 0–3200 SPM Powered by an 18V LITHIUM-ION battery

The Milwaukee® M18™ cordless 4-tool combo kit includes the 1/2in. hammer drill/driver, Sawzall® recip saw, 1/4in. hex impact driver and worklight. The M18™ cordless systems patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by Lithium-Ion, the M18™ cordless system delivers more torque, more power, and longer run time than the competition. Tools Included: 1/2in. hammer drill/driver, Sawzall recip saw, 1/4in. hex impact driver, worklight, Storage Case Included: Yes, Volts: 18, Battery Included: Yes (2), Charger Included: Yes Cordless 1/2in. hammer drill/driver Milwaukee 4-pole frameless motor Delivers 525 in.-lbs. of peak torque 0–550/0–1700 RPM, & 29,000 BPM Cordless Sawzall reciprocating saw Patented gear-protecting clutch and counterbalance system Durable, lightweight design 0–3200 SPM Cordless 1/4in. hex impact driver Delivers 2200 RPM Provides 1400 in.-lbs. of torque Offers 0–3200 IPM, providing more impacts for increased productivity Cordless worklight Has fold-away hook for handsfree use 135° rotating head to direct light at work area

The QEP Brutus 24in. Tile Saw is the perfect choice for contractors! Its powerful 3450 RPM motor cuts the toughest marble, granite, stone, porcelain and masonry products, as well as all types of tile. Enclosed dual water spray system evenly distributes water flow, extending the life of the diamond blade. Rips up to a 24in. tile and can diagonally cut an 18in. tile. Features a tilting head for miter cuts, overload protection, blade guard and stand for easy mobility. Grade: Professional, HP: 1 1/2, Rated Watts: 1,100, Common Usage: Cutting ceramic, porcelain, marble, granite and travertine, Speed - No Load (RPM): 3,450, Engine Speed (RPM): 3,450, Cutting Length (in.): 18 (diagonally), 24 (rip), Cutting Thickness (in.): 2 3/8, Blade Diameter (in.): 10, Arbor Size (in.): .625 Action cutting table for accurate cuts Adjustable tilting head offers quick and easy 45° to 90° miter cuts 1 1/2 HP, 120V, 9.5 Amp, 1100 Watt motor Automatic thermal overload protection prevents tile saw from overheating Locking tilt-up blade guard makes blade changes quick and easy Convenient stand with rear locking wheels keeps tile saw secure, and easily transportable Rustproof, fiberglass impregnated water tray easily slides in and out for easy cleaning Large nonslip rubber matted table with pull-out extension to support large format tile and slabs Angle/rip guide makes production cuts fast and consistent Rear water tray for water containment Plunge cutting for interior cutout of tile 2 3/8in. max. depth of cut

Low-profile head is easy to span with most knee kickers. Spring-loaded tail block with wheels provides stability off walls. Common Usage: Carpet stretcher, Compatible With: All kinds of carpet Stretches up to 23 1/2in. Includes power unit, tail block with wheels, three 3-ft. extension tubes, adjustable locking tube and wheeled carrying case

The Hitachi 18 Volt, 2-tool, pro-grade combo kit includes the DV18DL 18V hammerdrill that offers an incredible 570 in.-lbs. of torque plus the WH18DL impact driver with 1330 in.-lbs. of torque to power through the toughest jobs. 10-year limited warranty on tools; 2 years on Li-Ion batteries. Tools Included: Hammerdrill (DV18DL), Impact Driver (WH18DL), Storage Case Included: Yes, Volts: 18, Battery Type: Li-Ion, Battery Included: Yes (2), Charger Included: Yes 1/2in. hammerdrill has a class-leading 570 in.-lbs. of torque to power through the toughest jobs 1/4in. hex impact wrench delivers 1330 in.-lbs. of torque, along with an impact rate of 0–3200 BPM 3.0Ah Lithium-Ion HXP batteries offer 3X the life at half the weight of Ni-Cd and Ni-MH batteries HXP batteries are backwards compatible with all Hitachi 18V DVF3 and DMR tools Universal charger charges 7.2-18V Li-Ion, Ni-MH and Ni-Cd batteries

LXT Lithium-Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles. Combo kit includes 1/2in. hammer drill/driver, 1/2in. impact driver, reciprocating saw and 4-position Xenon flashlight. Tools Included: Hammerdrill, impact driver, reciprocating saw, flashlight, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-ion, Charger Included: Yes 18V LXT Hammer Drill/Driver 4-pole motor for 1280 in.-lbs. of torque Ergonomic shape fits like a glove Built-in LED light for more illuminated work Shift-Lock™ drive system quickly shifts from &Quot;hammer drill&Quot; to &Quot;driver&Quot; mode with one touch 18V LXT 1/4in. Impact Driver 4-pole motor delivers 1280 in.-lbs. of torque Compact, ergonomic shape fits like a glove Built-in LED light illuminates work area 18V LXT Reciprocating Saw High-torque motor delivers 50% faster cutting with a 1 1/8in. stroke that cuts 2900 SPM One-handed, fast tool-less blade changes and shoe adjustments 18V LXT Rechargeable Flashlight 4-positon pivoting head High illumination emits high power at 4500 Lux New Xenon bulb for extra brightness Runs up to 4.3 hours per charge

This Milwaukee 28V cordless right angle drill is designed for boring large holes between studs or joists or in tight areas. M28™ lithium-ion battery technology delivers up to twice the run time of Ni-Cd tools. This tool is great for plumbing and electrical applications such as drilling holes to run wire through studs and joists or boring holes in floors for plumbing venting. Rugged motor and geartrain are durable enough to handle the toughest jobs. Max. Torque (in.-lbs.): 1,081, Volts: 28, Speed - No Load (RPM): 0 - 400 / 0 - 1,000, Chuck Size (in.): 1/2, Reversible: Yes, Side Handle: Yes, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 18 1/2, Tool Weight (lbs.): 10.9 M28™ Lithium-ion battery technology for longer run times Convenient forward/reverse lever Head swivels 360° and can be locked tight in any position 1/2in. keyed chuck Drills up to 2 9/16in. hole in 2x4s Drills up to 1/2in. hole in steel

The Milwaukee M18 cordless 2-tool combo kit includes the Hammer Drill (2611-20) and the Sawzall® Recip Saw (2620-20). Powered by lithium-ion, the M18 cordless system delivers more torque, more power, and longer run-time than the competition. Tools Included: Hammer drill, reciprocating saw, Storage Case Included: Yes, Battery Type: Lithium-ion, Charger Included: Yes 2-speed hammer drill/driver with 650 in.-lbs. of torque 0–450/0–1800 RPM 1/2in. single-sleeve ratcheting metal chuck Sawzall® with variable-speed trigger; 0–3200 SPM Quik-Lok™ blade clamp Impact-resistant clutch mechanism

The Milwaukee M18 Cordless Combo includes a compact, low-profile 5 3/8in. metal circular saw that works great for cutting conduit, uni-strut, threaded rod and metal studs. Combo also includes a 1/2in. hammerdrill that cranks out 550 in.-lbs. of torque for fastening work. Powered by M18 XC high-capacity Li-Ion batteries for longer run times and extra performance. Tools Included: Metal saw, hammerdrill, Storage Case Included: Yes, Volts: 18, Battery Type: M18 XC high-capacity Li-Ion, Battery Included: Yes (2), Charger Included: Yes 5 3/8in. metal circular saw has 4-pole frameless motor that delivers 3600 RPM for 20% faster cuts Extra-large cut guide, impact-resistant window and LED light improves line of sight for more accurate cuts Quick, easy tool-free adjustment of cutting depth from 1/8in. to 2in. 5 3/8in. Metal Tech blade eliminates need for lubricants, reduces heat buildup in cut materials and eliminates burrs 1/2in. hammer drill/driver with 4-pole frameless motor delivers 550 in.-lbs. of peak torque 0–450/0–1700 RPM & 29,000 BPM Includes two M18 XC high-capacity Li-Ion batteries, charger, 30T carbide-tipped blade and contractor bag

The Milwaukee M18™ Cordless High-Torque Impact Wrench provides heavy-duty power in a compact size. Built with a Milwaukee 4-pole motor and a powerful impact mechanism, this impact wrench delivers the high torque your job demands. Cordless: Yes, Max. Torque (ft.-lbs.): 525, Impacts Per Minute (IPM): 0 – 2,200, Drive (in.): 3/4 hog ring, Speed - No Load (RPM): 0 – 1,900, Reversible: Yes, Volts: 18, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 9, Tool Weight (lbs.): 6.8 3/4in. anvil with friction ring provides quick and easy one-handed socket changes

The Chicago Pneumatic 19.2V is the strongest 1/2in. cordless impact wrench on the market! Delivers 425 ft.-lbs. of Ultimate Torque to handle the toughest fastening and loosening tasks. Includes 2 Ni-Cd batteries with charger. Cordless: Yes, Max. Torque (ft.-lbs.): 425, Impacts Per Minute (IPM): 2,200, Drive (in.): 1/2, Speed - No Load (RPM): 1,950, Reversible: Yes, Volts: 19.2, Battery Included: Yes, (2) Ni-Cd, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 9 1/16, Tool Weight (lbs.): 6 1/2 Replaceable carbon brush access Easy-change sliding battery Rubber comfort grip and battery protector

The sidewinder handle on this angle drill rotates 90° left or right for versatile drill positioning. The 10 Amp motor provides powerful performance and the toque limiter disengages the motor if the bit ever binds (low speed only). The tools heavy-duty side handle means extra support, and you can store the hex wrench in the adjustable top handle. An ergonomically designed grip provides even more comfort and less operator fatigue. this two-speed drill has a no-load speed of 300 RPM on low and 1200 RPM on high. Amps: 10, Chuck Size (in.): 1/2, Speed (RPM): 300 and 1,200, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: Yes

The Electric Eel Handheld Drill-Powered Drain Cleaner is professionally engineered to clean 1 1/4in. to 2 1/2in. dia. drain lines up to 35 feet. The Jacobs easy-to-tighten cable chuck fits securely in place and resists rust. Lightweight stainless steel drum is ideal when encountering harsh liquids. VSR 1/2in. drill with double ball bearing gear head offers smooth, quiet operation. U.S.A. Speed (RPM): 0 - 600, Variable Speed: Yes, Cable Size Diameter x L (in. x ft.): 3/8 x 25, Clearing Diameter (in.): 1 1/4 - 2 1/2, Clearing Distance (ft.): 25 1/2in. keyless Jacobs chuck Stainless steel cable drum holds 1/4in., 5/16in. or 3/8in. dia. cable Cast aluminum hand guard is designed for safety and ease of use

Powerful nibbler slices through mild steel and stainless steel. It has a convenient built-in thickness gauge and is double insulated for safety. Cordless: No, Amps: 6, Cutting Capacity Mild Steel (gauge): 10, Cutting Capacity Stainless Steel (gauge): 12, Inside Cutting Radius (in.): 4 3/4, Outside Cutting Radius (in.): 5 1/16, Strokes Per Minute (SPM): 1,300 All ball and needle bearings for longer tool life Easy punch and die replacement Includes punch, die, wrenches and steel tool case Overall length 8 1/2in.

The Milwaukee M18™ cordless 4-tool combo kit includes the 1/2in. Hammerdrill/Driver, Sawzall® Recip Saw, Circular Saw and Worklight. The M18 Cordless Systems patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Tools Included: Hammerdrill/driver, Sawzall recip saw, circular saw and worklight, Storage Case Included: Yes, Volts: 18, Battery Type: M18 Li-Ion, Battery Included: Yes (2), Charger Included: Yes 1/2in. hammer drill/driver delivers 550 in.-lbs. peak torque at 0–450/0-1700 RPM and 29,000 BPM Sawzall has a variable-speed trigger; 0–3200 SPM Circular saw has a powerful 3500 RPM motor Flashlight has a 135° rotating head

The Milwaukee M18 cordless 4-tool combo kit includes the Compact Driver (2601-20), Sawzall® Recip Saw (2620-20), Circular Saw (2630-20), and Worklight (49-24-0171). Powered by lithium-ion, the M18 cordless system delivers more torque, more power and longer run time than the competition. Tools Included: Drill/driver, circular saw, reciprocating saw, worklight, Storage Case Included: Yes, Battery Type: Lithium-ion, Charger Included: Yes Sawzall® with variable-speed trigger; 0–3200 SPM Circular saw with powerful 3500 RPM motor Compact Drill/Driver delivers 400 in.-lbs. at 0–1400 RPM Worklight with 135° rotating head

Heavy-duty shear quickly cuts through mild steel and stainless steel. Cuts laser-fine with no material loss in the kerf. A built-in thickness gauge and highly visible sight line further enchances cutting accuracy. Cordless: No, Amps: 6, Cutting Capacity Mild Steel (gauge): 10, Cutting Capacity Stainless Steel (gauge): 12, Strokes Per Minute (SPM): 1,600, Case Included: Yes Cuts with no material loss in the kerf Large top handle for extra control Blades each have 4 cutting edges Highly visible sight line to avoid wandering Ball and needle bearings for long tool life Includes shear blade set, gauge, hex wrench and steel tool case

This Chicago Pneumatic 12V cordless kit includes a 3/8in. impact wrench, a 3/8in. drill driver and a cordless LED worklight to tackle household projects. Powered by two 12V Li-Ion batteries that are lighter than Ni-Cds and keep power throughout the charge. Tools Included: Impact wrench, drill driver, worklight, Storage Case Included: Yes, Volts: 12, Battery Type: Li-Ion, Battery Included: Yes, (2) Li-Ion, Charger Included: Yes 12V, 3/8in. cordless impact wrench delivers 95 in.-lbs. torque and 2400 RPM Impact wrench has variable speed, reverse and keyless chuck 12V, 3/8in. cordless drill driver has low (0–360 RPM) and high (0–1300) speed ranges, 25 in.-lbs. torque Drill driver has variable speed, reverse, 15 clutch settings, built-in LED light and keyless chuck Cordless worklight has 16 bright LEDs, lasts up to 16 hours on one battery charge Worklight works with 10.8V to 19.2V Chicago Pneumatic batteries

This Milwaukee dual-bevel compound miter saw offers accuracy, power and ease of use. It includes a miter angle digital readout that provides repeatable accuracy to 0.1° and fine adjust with detent override makes it simple to dial-in precise miter angles. Amps: 15, Cutting Capacity - 0 Degree Miter: 2in.H x 8in.D, HP: 3.3, Blade Diameter (in.): 12, Bevel: Dual, Speed - No Load (RPM): 3200, Total Positive Miter Stops: 12, Max. Degree Miter Cuts - Left: 52, Max. Degree Miter Cuts - Right: 52, Total Positive Bevel Stops: 9, Max. Degree Bevel Cuts - Left: 48, Max. Degree Bevel Cuts - Right: 48, Arbor Size (in.): 5/8 or 1, Blade Included: Yes, Wrench Included: Yes, Dust Bag Included: Yes Dual integral jobsite lights Constant power technology with soft start maintains constant cutting speed under load Integral dust channel captures up to 75% of the dust and debris cut

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Step drill attachment can be interchanged without tools. U.S.A.

The M18 Li-Ion 4-Pack combines power tools and accessories in a convenient contractor bag at a great price. Cordless: Yes, Torque (in./lbs.): 650 High-performance 1/2in. hammer drill/driver delivers 650 in.-lbs. of torque Sawzall® reciprocating saw with gear protecting clutch 1/4in. hex impact wrench delivers 1400 in.-lbs. of torque M18 worklight with 135° rotating head and fold-away hook

The Milwaukee M18 cordless 4-tool combo kit includes the Hammer Drill (2611-20), Sawzall® Recip Saw (2620-20), Circular Saw (2630-20), and Worklight (49-24-0171). Powered by lithium-ion, the M18 cordless system delivers more torque, more power and longer run time than the competition. Tools Included: Hammer drill, circular saw, reciprocating saw, worklight, Storage Case Included: Yes, Volts: 18, Battery Included: Yes, Charger Included: Yes Two-speed hammer drill/driver delivers 650 in.-lbs. torque 6 1/2in. circular saw with powerful 3500 RPM motor Sawzall® with 0–3200 variable-speed trigger Worklight with 135° rotating head

The Milwaukee M18™ Cordless 3-Tool Combo Kit includes the 1/2in. High Torque Impact Wrench with Friction Ring, 3/8in. Compact Impact Wrench with Friction Ring and Work Light. The M18 cordless systems patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Tools Included: High torque impact wrench, compact impact wrench, worklight, Storage Case Included: Yes, Volts: 18, Battery Type: Li-Ion, Battery Included: Yes (2), Charger Included: Yes 1/2in. High Torque Impact Wrench (Model 2663-20) with Milwaukee-designed impact mechanism delivers 450 ft.-lbs. of torque for the toughest fastening applications 3/8in. Compact Impact Wrench (Model 2651-20) with Milwaukee 4-Pole frameless motor maximizes efficiency and run time Worklight (Model 49-24-0171) provides a fold-away hook for handsfree use and a 135° rotating head to direct light at the work area M18 XC High Capacity LITHIUM-ION batteries with Milwaukee DPM™-Digital Power Management

This Makita 18V LXT Lithium-Ion cordless 6-pc. combo kit includes a hammer drill-driver, circular saw, recip saw, impact driver, cutoff/angle grinder and flashlight. 2-speed 1/2in. Hammer Driver-Drill (0–400 / 0–1500 RPM) with Makita-built 4-pole motor delivers 450 in.-lbs. of Max Torque and weighs only 4.2 lbs. Variable speed Impact Driver (0–2300 RPM) provides 1330 in.-lbs. of Max Torque in a compact design and weighs only 3.4 lbs. Reciprocating Saw provides 0–2900 SPM with tool-less blade changes & shoe adjustments and weighs only 7.7 lbs. 6 1/2in. Circular Saw delivers 3700 RPM for faster cutting and ripping through wood and weighs only 6.9 lbs. 4 1/2in. Cut-Off/Angle Grinder produces an impressive 10,000 RPM and weighs only 5.3 lbs. 4-position Flashlight with Xenon bulb runs over 4 hours per charge. LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5X more cycles. Makita Lithium-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power). 30-minute Rapid Optimum Charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Charger also has a built-in fan to cool the battery which helps produce more lifetime work. Tools Included: 6: hammer driver-drill, circular saw, reciprocating saw, impact driver, cutoff/angle grinder, flashlight, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-Ion, Battery Included: Yes (2), Charger Included: Yes Charger earned the ENERGY STAR® label for meeting the strict energy-efficient guidelines set by the EPA and DOE

The Milwaukee 3-tool 28V cordless combo kit features the revolutionary M28™ lithium-ion battery pack exclusively from Milwaukee. With a powerful 28 Volt motor, the Milwaukee 1/2in. Hammer Drill develops an enormous 750 in.-lbs. of maximum torque and 0-600/0-1800 RPM. The 28 Volt Sawzall® Reciprocating Saw features a variable speed trigger with two levels of speed range: 0-2000 and 0-3000 strokes per minute. The Worklight features a high-intensity Xenon bulb and delivers over 5 hours of run time on a single battery. Tools Included: Hammer drill, reciprocating saw, worklight, Storage Case Included: Yes, Volts: 28, Battery Type: Lithium-ion, Charger Included: Yes M28 Lithium-ion battery technology 1/2in. Hammer drill Delivers 750 in.-lbs. of torque 0–600/0–1800 RPM 0–9000/0–27,000 BPM Metal ratcheting chuck with carbide jaws Sawzall Produces 0–2000/0–3000 SPM 1 1/8in. stroke for fast cutting Variable speed trigger Quik-Lok™ blade clamp Gear protecting clutch Keyless shoe adjustment Worklight With bright Xenon bulb Delivers over 5 hours run time per charge

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Counter-sink attachment can be interchanged without tools. U.S.A.

This heavy-duty unit is built for production drilling and will take the toughest drilling jobs. This unit has 350 RPM, geared low for maximum torque. Use the larger Model 4203 adjustable base (Item# M0094) for this powerhouse, and no job is too large. U.S.A. Speed (RPM): 350, Drilling Capacity (in.): 3/4, Chuck Size (in.): 3/4, Stand Included: No 11.5 Amp motor Dual mount gear case/reverse mount for tight quarter drilling Taps up to 1in.-14 threaded hole Develops up to 1670 pounds of drill point pressure with a 1in. steel plate

The Milwaukee M18™ Cordless Lithium-Ion 6-Tool Combo Kit includes the 1/2in. hammer drill/driver (2602-20), Sawzall® recip saw (2620-20), circular saw (2630-20), 1/4in. hex impact driver (2650-20), 4.5in. cutoff/grinder (2680-20), and worklight (49-24-0171). The M18 cordless Lithium-Ion systems patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM™ the M18 cordless system delivers more torque, more power, and longer run time than the competition. Tools Included: 1/2in. hammer drill/driver, Sawzall® recip saw, circular saw, 1/4in. hex impact driver, 4.5in. cutoff/grinder, worklight, Storage Case Included: Yes, Volts: 18, Battery Type: M18 XC Red Li-Ion, Battery Included: Yes, 2 XC Red Lithium-Ion, Charger Included: Yes M18™ cordless 1/2in. hammer drill/driver with Milwaukee 4-pole frameless motor delivers 525 in.-lbs. of peak torque, 0-550/0-1700 RPM, & 29,000 BPM M18 cordless Sawzall® reciprocating saw with patented gear-protecting clutch and counterbalance mechanism M18 1/4in. hex impact driver with the Milwaukee 4-pole frameless motor delivers 1400 in.-lbs. of torque M18 cordless 6 1/2in. circular saw delivers 3500 RPM with magnesium upper and lower guards for maximum durability M18 cordless 4 1/2in. cutoff/grinder with 4-pole motor delivers 9000 RPM while providing greater user safety with overload protection, toolfree and burst resistant guard M18 cordless worklight provides a fold-away hook for handsfree use and a 135° rotating head to direct light at the work area DPM™ Digital Power Management overload protection prevents damage to the tool and battery in abusive situations Works with M18 XC high capacity RED LITHIUM™ batteries and M18 compact RED LITHIUM™ batteries

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. 90° attachment can be interchanged without tools. U.S.A.

The Makita® 7-Pc. LXT Combo Kit includes the 1/2in. Hammer Driver-Drill (BHP452), 6 1/2in. Circular Saw (BSS611), Reciprocating Saw (BJR182), Impact Driver (BTD141), 4 1/2in. Cutoff/Angle Grinder (BGA452), Flashlight (BML185) and Jobsite Radio (BMR100W). LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5x more cycles. Makita Li-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power). U.S.A. Tools Included: Hammer drill-driver, Circular saw, Recip saw, Impact driver, Cutoff/angle grinder, Flashlight, Jobsite radio, Storage Case Included: Yes, Volts: 18, Battery Type: Li-Ion, Battery Included: Yes (2), Charger Included: Yes 30-Minute Rapid Optimum Charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature 30-Minute Rapid Optimum Charger has a built-in fan to cool the battery which helps produce more lifetime work

This Milwaukee dual-bevel sliding compound miter saw offers accuracy, power and ease of use. It includes a miter angle digital readout that provides repeatable accuracy to 0.1° and fine adjust with detent override makes it simple to dial-in precise miter angles. Amps: 15, Cutting Capacity - 0 Degree Miter: 4in. H x 12in. D, HP: 3.3, Blade Diameter (in.): 12, Bevel: Dual, Speed - No Load (RPM): 3200, Total Positive Miter Stops: 12, Max. Degree Miter Cuts - Left: 55, Max. Degree Miter Cuts - Right: 60, Total Positive Bevel Stops: 9, Max. Degree Bevel Cuts - Left: 48, Max. Degree Bevel Cuts - Right: 48, Arbor Size (in.): 5/8 or 1, Blade Included: Yes, Wrench Included: Yes, Dust Bag Included: Yes Dual integral jobsite lights Constant power technology with soft start maintains constant cutting speed under load Integral dust channel captures up to 75% of the dust and debris cut

Optional attachment for use with Darex XT3000 sharpener, Item# 3316900. Large drill attachment can be interchanged without tools. U.S.A.

This Milwaukee Electromagnetic Drill Press Motor is built for production drilling and will take the toughest drilling jobs. Its powerful 11.5 Amp motor develops up to 1600 pounds of drill point pressure with a 1in. steel plate. USA. Speed (RPM): 375 - 750, Drilling Capacity (in.): 1 1/4, Stand Included: No 11.5 amp motor No.3 Morris taper chuck Dual Mount Gear Case/Reverse Mount for tight quarter drilling Taps up to 1in.-14 threaded hole Use with large 4203 adjustable base

For remote drilling in metal, the 4270-21 is a great choice. It can drill up to 1 1/2in. diameter holes through 2in. thick steel with annular cutters, or 1/2in. diameter holes 4 1/4in. deep with twist drill bits. The tool is set up to accept standard 3/4in. Weldon shank cutters (not included). U.S.A. HP: 1.1, Amps: 9.0, Speed (RPM): 450, Drilling Capacity (in.): 1/2, Chuck Size (in.): 3/4 Powerful 9.0 Amp motor The strong two-coil magnet provides 2300 lbs. of deadlift force on 1in. thick steel The simple two-button control panel is located on the back, away from feed handle obstruction The feed handle can be conveniently relocated to the opposite side without the use of tools High-strength two-coil magnet User-friendly two-button control panel Left/right tool-less feed handle mount

The Milwaukee M18™ Cordless Lithium-Ion 9-Tool Combo Kit includes the 1/2in. hammer drill/driver (2602-20), Sawzall® recip saw (2620-20), circular saw (2630-20), 1/4in. hex impact driver (2650-20), 4.5in. cutoff/grinder (2680-20), 1/2in. high torque impact wrench (2662-20), right angle drill (2615-20), jig saw (2645-20) and worklight (49-24-0171). The M18 cordless Lithium-Ion systems patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM™ the M18 cordless system delivers more torque, more power, and longer run time than the competition. Tools Included: 1/2in. hammer drill/driver, Sawzall® recip saw, circular saw, 1/4in. hex impact driver, 4.5in. cutoff/grinder, 1/2in. high torque impact wrench, right angle drill, jig saw, worklight, Storage Case Included: Yes, Volts: 18, Battery Type: M18 XC Red Li-Ion, Battery Included: Yes, 2 XC Red Lithium-Ion, Charger Included: Yes M18™ cordless 1/2in. hammer drill/driver with Milwaukee 4-pole frameless motor delivers 525 in.-lbs. of peak torque, 0-550/0-1700 RPM, & 29,000 BPM M18 cordless Sawzall® reciprocating saw with patented gear-protecting clutch and counterbalance mechanism M18 1/4in. hex impact driver with the Milwaukee 4-pole frameless motor delivers 1400 in.-lbs. of torque M18 cordless 1/2in. high torque impact wrench with pin detent offers 450 ft.-lbs. of torque with 1900 RPM and 2200 IPM at only 6.7 lbs M18 cordless right angle drill works great in tight spaces with its 3.75in. head, 125 in.-lbs. torque, 3/8in. single sleeve ratcheting chuck and 11 setting electronic clutch M18 cordless jig saw delivers 2200 SPM with a 1in. stroke length and 45° bevel capacity and provides fast keyless blade changes with the Quick-Lok™ blade clamp M18 cordless 6 1/2in. circular saw delivers 3500 RPM with magnesium upper and lower guards for maximum durability M18 cordless 4 1/2in. cutoff/grinder with 4-pole motor delivers 9000 RPM while providing greater user safety with overload protection, toolfree and burst resistant guard M18 cordless worklight provides a fold-away hook for handsfree use and a 135° rotating head to direct light at the work area DPM™ Digital Power Management overload protection prevents damage to the tool and battery in abusive situations Works with M18 XC high capacity RED LITHIUM™ batteries and M18 compact RED LITHIUM™ batteries