Ideal for hand trucks, platform trucks and other industrial equipment where flat-free performance is mandatory. A good replacement for semi-pneumatic wheels. Sold individually. U.S.A. Tire Type: Solid rubber, Tire Size: 6 x 150, Bore Diameter (in.): 1/2, Outside Diameter (in.): 6, Bearings Included: Yes, Hub Width (in.): 2 1/4, Load Capacity (lbs.): 300, Rim Included: Yes, Tread Type: Ribbed Wide-tread ribbed solid rubber tire is mounted on a rugged polypropylene ball bearing wheel Puncture-proof tire provides a smooth, quiet ride with low starting effort on uneven floors

Filters are designed for use with Wagner sprayers, including GX-06, GX-07, GX-08 and GX-10. U.S.A. 2 filters per pack Filter frames are color-coded by grade

Filters designed for use with Wagner sprayers, including GX-06, GX-07, GX-08 and GX-10. 2 filters per pack. Filter frames are color-coded by grade. U.S.A.

Designed to be used on most Honda and Acura fuel-injected models since 1986, this specialty socket has been designed to easily remove and replace the specially shaped banjo bolt used to attach the fuel line to the fuel filter. Single, Pair, or Set: Single, Vehicle Make: Honda and Acura fuel injected modes since 1986, Common Usage: To remove and replace the banjo bolt, Works With: Banjo bolt, Drive (in.): 3/8, Material Type: CR-MO alloy steel, Storage Case Included: No, Includes: (1) Socket, Pieces (qty.): 1 Socket fits completely over the banjo bolt for 360° of contact Full contact eliminates the risk of stripping the bolt

Allows quick identification by size and style. Sockets not included. 1/2in. Standard. U.S.A. Drive (in.): 1/2, Pieces (qty.): (1) SAE tray (Red), Socket Capacity (qty.): 28 (14 deep well, 14 standard), Socket Size Limit: 3/8 in. through 1 1/4 in., Material Type: Plastic, Standard Compatibility: Yes, Deep Well Compatibility: Yes

Allows quick identification by size and style. Sockets not included. 1/2in. Metric. U.S.A. Drive (in.): 1/2, Pieces (qty.): (1) Metric tray (gray), Socket Capacity (qty.): 34 (17 Deep Well, 17 Standard), Socket Size Limit: 10mm through 27mm, Material Type: Plastic, Standard Compatibility: Yes, Deep Well Compatibility: Yes

Protanium™ steel with Proguard™ corrosion resistant finish. 16 tool metric L-wrench and GorillaGrip™ set. U.S.A. Sets (qty.): 2, Total Hex Keys (qty.): 16, Hex Tool Type: L Wrench / Folding, Metric (mm): L wrenches: 1.5, 2, 2.,5, 3, 4, 5, 6, 8, 10 (folding) 2, 2.5, 3, 4, 5, 6, 8 GorillaGrip™ unit with 7 swing-out HEX tools

Supplies 3 air tools from one outlet! Manifold has one 3/8in. N.P.T. inlet with three 1/4in. outlets. Tough aluminum. Coupler Size (in.): 3/8, Swivels: No, Hose Diameter (in.): 1/4, Material Type: Aluminum, Pieces (qty.): 1

Milton A-style couplers fit A-style plugs. A-style (ARO 210) couplers are push type, steel, plated to prevent rust. A-type plugs are steel, plated to prevent rust. U.S.A. Coupler Size (in.): 1/4, Max. PSI: 300, Male or Female: M, F set, Swivels: No, Material Type: Steel, Style: A, Pieces (qty.): 5 Maximum pressure: 300 PSI Maximum temperature: 250°F Air Flow: 34 SCFM @ 100 PSI Seals: Buna-N

This combo includes a 7in. regular and 5 1/2 small flashlight, both 100% weatherproof and ready to use with included batteries. Each have hand strap. Overall Length (in.): 7 and 5 1/2, Battery Included: Yes, Battery Type: D, Includes (qty.): (1) 7in., (1) 5 1/2in. flashlight

Remote start adapter is designed for Primepact to non-Generac unit harnesses. U.S.A. Application: Remote start adapter Remote start adapter for Primepact to non-Generac unit harness Fits 169110, 169111, Onan harnesses

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 220cc Generac OHVI engines. U.S.A. Compatible With: Item#s 169140 and 165886, Kit Includes: Spark plugs, air filter, oil filter, funnel and chamois Includes spark plugs, air filter, oil filter, funnel and chamois

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 410cc Generac OHVI engines. U.S.A. Compatible With: Item#s 166543, 167927, 167928, 167929, 167145, 167147, 169148, 169139, 169135 and 166540, Kit Includes: Spark plugs, air filter, oil filter, funnel and chamois Includes spark plugs, air filter, oil filter, funnel and chamois

Filter only, does not include top cap with pipe threads. For our #170301 filter. U.S.A. Diameter (in.): 3 3/4, Height (in.): 5 1/4

This replacement fuel filter element has over 350 square inches of filtering surface. U.S.A. Diameter (in.): 3, Height (in.): 4 1/4 Filters microscopic particles of rust, sand, dirt, scale etc. as small as 10 microns to protect your engine 366 square inches of filtering service packed into a small element Easy to change out, made easier with use of fuel filter wrench; item #17050 Replacement gasket also included (recommended to be changed out at same time as element)

Closed-cell PVC sponge matting provides excellent leg and back support and reduces discomfort from standing for long periods of time. Slip-resistant, directional ribbed-top surface contributes to a safe work area. Protects floors while shielding falling tools from damage. Mat is 3/8 in. thick, black in color and has all 4 sides beveled and sealed. For dry, light-to-medium-duty work areas. U.S.A. Color: Black, Dimensions L x W (ft.): 3 x 2, Thickness (in.): 3/8, Pattern Design: Ribbed, Material Type: PVC

Cushion-Ease nitrile rubber safety borders for Cushion-Ease rubber mat, Item# 171311. A simple, multi-dimensional ramp system that utilizes very few parts and allows you to configure mats for a specific work station. In yellow. Measures 2 ft. x 3 ft. U.S.A. Factory shipped. Color: Yellow, Dimensions L x W (ft.): 3 x 2, Material Type: Rubber Female

Cushion-Ease nitrile rubber safety borders for Cushion-Ease rubber mat, Item# 171311. A simple, multi-dimensional ramp system that utilizes very few parts and allows you to configure mats for a specific work station. In yellow. Measures 2 ft. x 3 ft. U.S.A. Factory shipped. Color: Yellow, Dimensions L x W (ft.): 3 x 2, Material Type: Rubber Male

Length (in.): 5, Pieces (qty.): 1,000

Tiger Replacement Trailer Light for trailers over and under 80in.W. Designed for Drivers side use. Combination stop/tail/turn light with license light. Light Shape: Rectangle, Light Size (in.): 5 3/4 x 5 1/4, Light Color: Red, Mount Type: Stud, Lights Included (qty.): 2  Lens and housing are permanently sealed using sonic welding

This Blazer Replacement Trailer Light is for trailers over and under 80in.W. Designed for drivers side use. Combination stop/tail/turn light with license light. Light Shape: Rectangle, Light Size (in.): 5 3/4 x 5 1/4, Light Color: Red, Mount Type: Stud, Lights Included (qty.): 1 Lens and housing are permanently sealed using sonic welding

Quality padlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability, and each offers a limited lifetime guarantee. Material: Laminated steel, Keys Included (qty.): 2, Includes (qty.): 1, Length (in.): 1 3/4 W x 2 1/2 shackle 1 3/4in. (44mm) wide laminated steel body for superior strength 2 1/2in. hardened steel shackle for extra cut resistance 4-pin cylinder helps prevent picking Dual locking levers provide extra pry resistance Thousands of key changes maximize key integrity Proprietary rustproofing for longer life Limited lifetime warranty U.S.A. Model 1DLJ

Quality padlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability, and each offers a limited lifetime guarantee. Material: Laminated steel, Keys Included (qty.): 2, Includes (qty.): 1, Length (in.): 1 9/16 x 9/32 shackle 1 9/16in. (40mm) wide laminated steel body for superior strength 4-pin cylinder helps prevent picking Hardened steel 9/32in. shackle for superior cut resistance Dual locking levers provide extra pry resistance Proprietary rustproofing for longer life Limited lifetime warranty U.S.A. Model 3DLH

Quality padlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability, and each offers a limited lifetime guarantee. Application: Outdoor, Material: Laminated steel, Keys Included (qty.): 2, Includes (qty.): 1, Length (in.): 1 9/16 Ideal for outdoor applications 1 9/16in. (40mm) wide laminated steel body for superior strength High-tech thermoplastic shell designed to withstand the elements Hardened steel 3/8in. shackle with molded cover Exciting, colorful outdoor protection Matching color keyhead for added convenience Limited lifetime warranty U.S.A. Model 312D

All-purpose cleaner, degreaser and deodorizer is strong enough for industrial applications, yet non-toxic and safe for use anywhere. Concentrated formula. U.S.A. Application: All purpose cleaner, Gallons: 1

These boxes are designed to stand up to professional use with increased wall thickness in the body and lid, full length steel hinge pins, steel latches and a steel riveted handle hold down. The removable storage box in Item# 178069 can be configured into 13 different compartments and is accessible while positioned in the lid. U.S.A. Application: Portable tool storage, Color: Black / red, Dimensions W x D x H (in.): 19 x 10 x 9, Handle Included: Yes, Handle Type: Recessed, Handles (qty.): 1, Includes: Tote tray, Material: Plastic Large, nickel-plated, steel draw bolts for greater strength Galvanized steel hinge pins Partitioned tote tray provides greater separation of tools Recessed luggage-type carrying handle Padlock eye Dimensions (WxDxH): 19in x 10in x 9in

Organizes combination, Allen, mini and flare nut wrenches in your toolbox. U.S.A. Organizes 29 combination (1/4in. to 1in.), 24 Allen, 20 mini and 3 flare nut wrenches 22in.L x 16in.W organizer Fits the drawer of most roll-away toolboxes

The Blitz Box with Wall Mount offers a durable, stackable, active storage system for garage, workshop and vehicles. Its great for storing collections of lawn and pool chemicals, paint cans, sporting equipment and more. Includes an innovative, easy-to-use wall mount and hardware for space-saving wall storage. Made of rugged all-weather, UV-resistant resin. Whether mounting or stacking, the Blitz Box gives you the freedom to organize your space as you choose, whether its your whole garage or a single activity center. U.S.A. Application: Garage and shop, Color: Black, Dimensions L x W (in.): 13 x 14 1/2 x 10, Material: Resin 13in.L x 14 1/2in.W x 10in.H Mobile, stackable or wall mountable Utilizes wall space with mounting plate and hardware Gets items off floor for safe and dry storage Portable storage — take it where you need it Easy to clean Sturdy, space-saving stackable storage

A big supply of large cotter pins in a storage case. Has 1/8in. x 2in., 5/32in. x 2 1/2in., 3/16in. x 3in., 1/4in. x 2in., 1/4in. x 3in., 5/16in. x 2 1/2in. sizes Convenient resealable case

This Bikeway Bike and Cart Replacement Tire provides top performance, traction and durability on varied terrain. Great for garden carts, wagons and many other applications. Tire Diameter (in.): 20, Tire Size: 20 x 1.75

This Bikeway Bike and Cart Replacement Tire provides top performance, traction and durability on varied terrain. Great for garden carts, wagons and many other applications. Tire Diameter (in.): 20, Tire Size: 20 x 1.75

This Bikeway Bike and Cart Replacement Tire provides top performance, traction and durability on varied terrain. Great for garden carts, wagons and many other applications. Tire Diameter (in.): 20, Tire Size: 20 x 2.125

This Bikeway Bike and Cart Replacement Tire provides top performance, traction and durability on varied terrain. Great for garden carts, wagons and many other applications. Tire Diameter (in.): 24, Tire Size: 24 x 2.10

This Bikeway Bike and Cart Replacement Tire provides top performance, traction and durability on varied terrain. Great for garden carts, wagons and many other applications. Tire Diameter (in.): 26, Tire Size: 26 x 1.375

This Bikeway Bike and Cart Replacement Tire provides top performance, traction and durability on varied terrain. Great for garden carts, wagons and many other applications. Tire Diameter (in.): 26, Tire Size: 26 x 1.375

This Bikeway Bike and Cart Replacement Tire provides top performance, traction and durability on varied terrain. Great for garden carts, wagons and many other applications. Tire Diameter (in.): 27, Tire Size: 27 x 1.25

10-pk. of 12in. replacement blades is for use with 12in. butchers hand saw, Item#s 168673 and 168673K, sold separately. Compatible With Item Number (s): 168673, 168673K, Blade Size (in.): 12

Northern Industrial Warrior Performance Work Gloves are built to take on any tasks or battles you undertake. Whether youre in the warehouse, performing maintenance or simply working in the back yard, Warrior Performance Work Gloves are the gloves you want. Size: M, Color: Black, gray, Machine Washable: Yes, Pairs (qty.): 1 Double-layer fingertips and thumb offer strength and durability Padded knuckle protection and reinforced nylon fourchette improves dexterity Fabric on glove back removes heat and moisture Adjustable Velcro® closure Machine wash and air dry.

Warrior Performance Working Gloves are built to take on any tasks or battles you undertake. Whether youre in the warehouse, performing maintenance or simply working in the back yard, Warrior Performance Work Gloves are the gloves you want. Size: L, Color: Black, gray, Machine Washable: Yes, Pairs (qty.): 1 Double-layer fingertips and thumb offer strength and durability Padded knuckle protection and reinforced nylon fourchette improves dexterity Fabric on glove back removes heat and moisture Adjustable Velcro® closure Machine wash and air dry

Warrior Performance Work Gloves are built to take on any tasks or battles you undertake. Whether youre in the warehouse, performing maintenance or simply working in the back yard, Warrior Performance Work Gloves are the gloves you want. Size: XL, Color: Black, gray, Machine Washable: Yes, Pairs (qty.): 1 Double-layer fingertips and thumb offer strength and durability Padded knuckle protection and reinforced nylon fourchette improves dexterity Fabric on glove back removes heat and moisture Adjustable Velcro® closure Machine wash and air dry

Warrior Performance Work Gloves are built to take on any tasks or battles you undertake. Whether youre in the warehouse, performing maintenance or simply working in the back yard, Warrior Performance Work Gloves are the gloves you want. Size: 2XL, Color: Black, gray, Machine Washable: Yes, Pairs (qty.): 1 Double-layer fingertips and thumb offer strength and durability Padded knuckle protection and reinforced nylon fourchette improves dexterity Fabric on glove back removes heat and moisture Adjustable Velcro® closure Machine wash and air dry

Four 4in., four 6in. and two 9in. clamps. Nylon construction with swiveling flex pads. Tool Length (in.): 4in. (4), 6in. (4), 9in. (2), Pieces (qty.): 10, Material Type: Nylon

This NorTrac® pillow block features solid cast housing and top-quality advanced seals designed to prevent leakage and keep out dirt in your hydraulic application. Block Size (in.): 1 1/4, Dimensions L x W x H (in.): 4 3/4 x 3 3/11 x 1 10/11, Bolt Hole Size (in.): 2/3 x 8/9, Mount Type: 2-bolt, Bolt Hole Shape: Oval, Static Load Capacity (lbs.): 3,353, Dynamic Load Capacity (lbs.): 2,249

This NorTrac® pillow block features solid cast housing and top-quality advanced seals designed to prevent leakage and keep out dirt in your hydraulic application. Block Size (in.): 1 1/4, Dimensions L x W x H (in.): 4.25 x 4.25 x 1.58, Bolt Hole Size (in.): 6/13, Mount Type: 4-bolt, Bolt Hole Shape: Round, Static Load Capacity (lbs.): 3,353, Dynamic Load Capacity (lbs.): 2,249 Pillow blocks should be used in pairs

#45 steel construction adds strength and durability to each wedge. Ideal for splitting logs with efficiency and precision. Application: Splitting, Weight (lbs.): 4, Material: Forged steel

This NorTrac® pillow block features solid cast housing and top-quality advanced seals designed to prevent leakage and keep out dirt in your hydraulic application. Block Size (in.): 1 1/4, Dimensions L x W x H (in.): 5.83 x 3.15 x 1.58, Bolt Hole Size (in.): 5/8, Mount Type: 2-bolt, Bolt Hole Shape: Round, Static Load Capacity (lbs.): 3,353, Dynamic Load Capacity (lbs.): 2,249

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 78in.L x 1/2in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 78 x 1/2 x 5/16 V-Belt Replacement Belt for: C22707 CASE/IH L478 DAYCO MXV4780 JASON V4L0780 VAPORMATIC XDV 48-780 DURK.-ATW XHD4780 MAGAM A-108508 HOLIDAY A-108508 HOMELITE 11296 SEARS / ROPER / AYP 119037 MONTGOMERY WARDS 127521 ROTARY 1601524 DEUTZ ALLIS 1601524 HOMELITE 1712482 SIMPLICITY 200973 GILSON 200982 GILSON 200982 MONTGOMERY WARDS 200982 WESTERN AUTO 2087732 ALLIS CHALMERS 2087732 DEUTZ ALLIS 2087732 SIMPLICITY 248-078 STENS 248078 STENS 25723 SEARS / ROPER / AYP 26129 ARIENS / GRAVELY 265-058 STENS 265-150 STENS 265100 STENS 265150 STENS 308464 HAHN-ECLIPSE 309464 HAHN-ECLIPSE 328826 JACOBSEN 328826 MINNEAPOLIS MOLINE 4H780 THERMOID 4H7800 THERMOID 4L780K PIX 4798J SEARS / ROPER / AYP 48X780 PIRELLI 48X780 TISCO 523140910 HUSQVARNA 59701C1 CASE/IH 59701C1 INTERNATIONAL 6489 TORO / WHEEL HORSE 66-478 SILVER STREAK 67788 SEARS / ROPER / AYP 6849 TORO / WHEEL HORSE 6878 GATES 72088100 ALLIS CHALMERS 75-478 OREGON A-7520 ROTARY 7521 ROTARY 754-3025 CUB CADET 7543025 MTD/CUB CADET 7543028 MTD/CUB CADET 75478 SILVER STREAK 7927 TORO / WHEEL HORSE 810078 POWER KING 84780 GOODYEAR 9543025 MTD/CUB CADET

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 73in.L x 1/2in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 73 x 1/2 x 5/16 V-Belt Replacement Belt for: C13184 CASE/IH C23808 CASE/IH D3524 COUNTRY CLIPPER JAC991488 JACOBSEN JA991488 HOMELITE JA991488 MONTGOMERY WARDS L473 DAYCO MXV4730 JASON V4L0730 VAPORMATIC XHD4730 MAGAM 1216 WESTERN AUTO 127516 ROTARY 1602157 HOLIDAY 1602157 HOMELITE 1651201 SIMPLICITY 1719746 SIMPLICITY 174687 SIMPLICITY 20843Y RUGG 231511 FORD 248073 STENS 28802 GREENLINE 29802 GREENLINE 3X627 MTD/CUB CADET 305698 NOMA/AMF/DYNAMARK 32322 ARIENS / GRAVELY 37X48 MURRAY 392545 JACOBSEN 4H730 THERMOID 4L730K PIX 48X730 PIRELLI 48X730 TISCO 59849 SEARS / ROPER / AYP 66-473 SILVER STREAK 6873 GATES 7-04204 PRIME TIME 704204 PRIME TIME 75073 SILVER STREAK 754-0344 CUB CADET 7540344 MTD/CUB CADET 75413 SILVER STREAK 75473 SILVER STREAK 84730 GOODYEAR

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 76in.L x 1/2in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 76 x 1/2 x 5/16 V-Belt Replacement Belt for: C16094 CASE/IH C16498 CASE/IH L476 DAYCO MXV4760 JASON V4L0760 VAPORMATIC XHD4760 MAGAM 10561 MIDDLESWORTH 109428 TORO / WHEEL HORSE 111624 TORO / WHEEL HORSE 113141 TORO / WHEEL HORSE 11361 AMERICAN YARD PRODUCTS 11361 HABAN 11361 MURRAY 11361 SEARS / ROPER / AYP 11624 TORO / WHEEL HORSE 127519 ROTARY 1585 TORO / WHEEL HORSE 1586 TORO / WHEEL HORSE 1607284 HOLIDAY 1607284 HOMELITE 1607284 SIMPLICITY 162081 DEUTZ ALLIS 162081 HOLIDAY 162081 HOMELITE 162081 SIMPLICITY 162081 SNAPPER 248076 STENS 25129 ARIENS / GRAVELY 272217 MAXIM 30422 BOLENS 30422 COTTER 30422 TROY BILT 320272217 MAXIM 326932 MURRAY 330463 JACOBSEN 4H760 THERMOID A-4L490 ROTO-HOE 4L760K PIX 400293 DEINES 400923 DEINES 48X760 PIRELLI 48X760 TISCO 60064 SWEEPSTER 66-476 SILVER STREAK 6876 GATES 7-07854 PRIME TIME 7-07959 PRIME TIME 707854 PRIME TIME 707959 PRIME TIME 75-161 SILVER STREAK 75476 SILVER STREAK 84760 GOODYEAR 9714 TORO / WHEEL HORSE A74K / 4L760K Kevlar Belt

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 77in.L x 1/2in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 77 x 1/2 x 5/16 V-Belt Replacement Belt for: B231 POWER KING C23949 CASE/IH L477 DAYCO MXV4770 JASON M40757 JOHN DEERE RM36B5 POWER KING V4L0770 VAPORMATIC XHD4770 MAGAM 10242 SEARS / ROPER / AYP 10242 TORO / WHEEL HORSE 109427 TORO / WHEEL HORSE 127520 ROTARY 170164 ALLIS CHALMERS 170164 MASSEY FERGUSON 170164 SIMPLICITY 1726701 BOLENS 203024 HEALD 248-077 STENS 248077 STENS 3X628 MTD/CUB CADET 349079 JACOBSEN 37X20 MURRAY 37X34 MURRAY 37X34 SEARS / ROPER / AYP 4H770 THERMOID 4L770K PIX 40757 JACOBSEN 477599-R2 CUB CADET 477599R2 CASE/IH 477599R2 INTERNATIONAL 48X770 PIRELLI 48X770 TISCO 500339 LAWN ROVR 500489 JACOBSEN 519958M1 MASSEY FERGUSON 62322 SNAPPER 66-477 SILVER STREAK 6877 GATES 72078 ARIENS / GRAVELY 75-477 OREGON A-7520 ROTARY 7540338 YARDMAN 75477 SILVER STREAK 84770 GOODYEAR 9540338 MTD/CUB CADET

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 51in.L x 5/8in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 51 x 5/8 x 13/32 V-Belt Replacement Belt for: G120 SEARS / ROPER / AYP LB50 KUBOTA L551 DAYCO MXV5510 JASON S429 HABAN V5L0510 VAPORMATIC XDV 58-510 DURK.-ATW XHD5510 MAGAM 103347 LAWN BOY 105067 SIMPLICITY 105067 SNAPPER 1051105 NOMA/AMF/DYNAMARK 116183 TORO / WHEEL HORSE 127596 ROTARY 1501105 NOMA/AMF/DYNAMARK 165167 MONTGOMERY WARDS 258-051 STENS 258051 STENS 3X474 MTD/CUB CADET 31217956 DIADEM 320021253 WHITE 3565 MIDLAND 4461517 A & I MEGA-CROSS 45451 MIDLAND 5H510 THERMOID 5L510K PIX 5042-51 MONTGOMERY WARDS 504251 MONTGOMERY WARDS 535 MOTT 58X510 PIRELLI 58X510 TISCO 6434 MTD/CUB CADET 6565 ARIENS / GRAVELY 66-551 SILVER STREAK 6951 GATES 75-551 OREGON 754-0188 MTD/CUB CADET 754-0268 MTD/CUB CADET 754-188 MONTGOMERY WARDS 754-268 YARDMAN 7540188 MTD/CUB CADET 7540268 MTD/CUB CADET 754188 MONTGOMERY WARDS 754268 YARDMAN 75551 SILVER STREAK 7596 ROTARY 85510 GOODYEAR 942 MOTT 9540188 MTD/CUB CADET 9540268 MTD/CUB CADET 954260 MTD/CUB CADET

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 52in.L x 5/8in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 52 x 5/8 x 13/36 V-Belt Replacement Belt for: 6952 gates 85520 GoodYear L552 Dayco 5H520 Thermoid 12-7597 Rotary 258-052 Stens 75-552 Silver Streak

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 53in.L x 5/8in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 53 x 5/8 x 13/32 V-Belt Replacement Belt for: 6953 gates 85530 Goodyear L553 Dayco 5H530 Thermoid 12-7598 Rotary 258-053 Stens 75-553 Silver Streak

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 50in.L x 5/8in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 50 x 5/8 x 13/32 V-Belt Replacement Belt for: A209 EZ ROLL E846B NATIONAL F650 MICHAELS MACHINE GB235000 LAWN BOY LB49 KUBOTA L550 DAYCO MXV5500 JASON V5L0500 VAPORMATIC XHD5500 MAGAM 072-02900 ARIENS / GRAVELY 100129 TORO / WHEEL HORSE 108162 BOBCAT / RANSOMES 127595 ROTARY 1563R SEARS / ROPER / AYP 1568R SEARS / ROPER / AYP 1669394 SIMPLICITY 1674898 SIMPLICITY 235000 FORD 235000 LAWN BOY : 258-050 STENS 258050 STENS 29117 SNAPPER 320009040 WHITE 320018635 WHITE 41969 MONTGOMERY WARDS 41969 YARDMAN 4461509 A & I MEGA-CROSS 5H500 THERMOID 5L500K PIX 5042-50 MONTGOMERY WARDS 504250 MONTGOMERY WARDS 58X500 PIRELLI 58X500 TISCO 622407 ATLAS 66-550 SILVER STREAK 6950 GATES 701 MOTT 702829 LAWN BOY 7202900 ARIENS / GRAVELY 7493 ROTARY 75-550 OREGON 754-0138 MTD/CUB CADET 754-0179 MTD/CUB CADET 754-1038 MTD/CUB CADET 754-138 MONTGOMERY WARDS 754-144 WESTERN AUTO 754-170 CUB CADET 754-179 WESTERN AUTO 7540138 MTD/CUB CADET 7540179 MTD/CUB CADET 7540445 MTD/CUB CADET 7541038 MTD/CUB CADET 754138 MONTGOMERY WARDS 754170 CUB CADET 754179 WESTERN AUTO 75550 SILVER STREAK 7595 ROTARY 80003 SANBORN 85500 GOODYEAR 9127 WEST POINT 9167 WEST POINT 9540138 MTD/CUB CADET 9540179 MTD/CUB CADET 9540445 MTD/CUB CADET 9541038 MTD/CUB CADET

The Clauss Enviro-Line Detachable Shear is is easy to clean with detachable blades. Its serrated blades are made with Titanium-bonded® steel, three times harder than untreated steel, to resist corrosion and stay sharp longer. Blade Size (in.): 8, Material: Titanium-bonded steel Easy to clean with detachable blades Titanium-bonded steel is three times harder than untreated steel Resist corrosion Product and packaging are made from recycled materials

This Marathon Tires Flat-Free Solid Wheel never goes flat, keeping hand trucks and carts rolling along. Tire Type: Solid rubber, Rim Size (in.): 4, Tire Size: 10 x 2.75, Bore Diameter (in.): 5/8, Outside Diameter (in.): 10, Bearings Included: Yes, Hub Width (in.): 2.3, Load Capacity (lbs.): 200, Rim Included: Yes, Grease Fittings: No, Tread Type: Ribbed Made of heavy-duty solid rubber Steel rim with 5/8in. ball bearings

Fits where an ordinary toolbox wont. Built-in, recessed, full-grip handle for easy portability. Fully lockable. U.S.A. 19in.W x 11in.D x 4 1/2in.H Fits where an ordinary tool box wont Great for use at home, the shop, boating and in the car or truck Roomy bulk storage area plus one small parts compartment that will accommodate most of your tools Built-in recessed full-grip handle Fully lockable U.S.A. Model RB-19N

This kit includes all of the necessary parts to create a decorative spray pattern in your pond: a diverter valve, a telescoping riser and a waterbell nozzle. Hardware Type: Nozzle, Pattern Design: Waterbell, Outlet Diameter (in.): 1, Valve Type: Diverter valve

Duracell Coppertop batteries are engineered to deliver the right level of power for your business or household needs. Batteries are guaranteed to remain fresh for up to 7 years. Environmentally friendly batteries are mercury free and work in a wide variety of devices, including remote controls, smoke alarms, flashlights, clocks, radios, toys and more. Pack of 16. U.S.A. Size: AA, Includes (qty.): 16

30mm 12-pt. axle nut socket removes and installs front wheel drive axle shaft nuts and automatic transmission tail output shafts. Impact quality construction for use with ratchet, breaker bar, impact wrench, or torque wrench. Extra-deep socket to fit various axle lengths. Drive (in.): 1/2, Point Size (qty.): 12, Metric Socket Size (mm): 30, Material Type: Chrome vanadium steel, Deep Well: Yes

28mm 6-pt. axle nut socket removes and installs front wheel drive axle shaft nuts. Impact quality construction for use with ratchet, breaker bar, impact wrench, or torque wrench. Extra-deep socket to fit various axle lengths. Drive (in.): 1/2, Point Size (qty.): 6, Metric Socket Size (mm): 28, Material Type: Chrome vanadium steel, Deep Well: Yes

This humane trap is a safe solution for relocating unwanted animals and it’s big enough for the whole gang. This non-mechanical trap holds multiple rats, mice, squirrels, chipmunks and other gnawing rodents and animals. Removal Of: Rodents, Indoor/Outdoor Use: Both, Dimensions L x W x H (in.): 17 x 7 1/2 x 6, Material Type: Steel, Includes: (1) Trap, Assembly Required: No

File guide grips file securely and makes it easy to hand-sharpen saw chain. Lines on the guides frame make it easy to align the file consistently and correctly and keep file at the correct depth. Assembled file guide includes one round file, frame and wooden handle. U.S.A. Application: Grips file securely and makes it easy to hand-sharpen saw chain, Includes: One round file, frame, wooden handle, Includes (qty.): (1) 5/32 file guide For 25AP, 91VG, 91VS Oregon® chain types

The CLC Custom Leathercraft 48-Pocket Bucket Tool Organizer features 14 double row pockets inside and 34 triple row pockets outside to organize a wide range of tools and accessories. Designed to fit into most standard 3 1/2- to 5-gallon buckets. Also includes security pocket with hook-and-loop closure, measuring tape strap, key clip and drill pocket with hook-and-loop handle strap. Organizer Type: Bucket, Material Type: Fabric, Pockets Included (qty.): 48

The CLC Custom Leathercraft Blackberry® Holder is designed for PDA, Blackberry® style mobile devices or iPhone®. Includes ear-bud pocket and sleeves for business cards, credit cards, pens or touch-screen stylus. Belt clip swivel t0 accommodate wearing on left or right side. Magnetic shutoff feature. Organizer Type: Pouch, Material Type: Polyester, Strap Type: Belt clip

This Arcon Generator Pigtail Adapter allows you to use the 30 Amp, 115 Volt output on your generator. Connector Type: Adapter, Amps: 30, UL Listed: Yes Supplies power for a 30 Amp RV female pigtail from a 30 Amp locking plug generator receptacle Able to connect 30 Amp RV extension power cord Bright yellow L5-30 x 30A RV 12in. pigtail, carded/1 UL listed

Medique Eye Wash provides emergency eyewash relief from chemicals and protects workers from minor eye irritants. Sterile irrigating solution flushes particles from eyes quickly. U.S.A. Pieces (qty.): 1, First Aid Type: Eye cleansing

Heavy-duty Wel-Bilt 19in. toolbox has removable tray and lid organizers. Strong double latch with padlock eyehole. Recessed ergonomic comfort handle. Application: Portable tool storage, Color: Black / Red, Dimensions L x W x H (in.): 19 1/2 x 10 7/8 x 9 3/8, Handle Included: Yes, Handle Type: Recessed, Handles (qty.): 1, Includes: Toolbox, 2 removable lid organizers, removable tray, Lock Type: Padlock eyehole, Material: Plastic Plastic 19 1/2in.L x 10 7/8in.W x 9 3/8in.H Not related to WELBILT® products of Enodis companies

This Medique 61-Pc. Portable First Aid Kit is a great kit for use in the home, at the office, on the jobsite, in the car, on the sports field or anywhere you need basic first aid. U.S.A. Pieces (qty.): 61, First Aid Type: Basic, Case Type: Polypropylene Designed to meet OSHA requirements Items are packed in sturdy polypropylene carry case with carry handle Organized tray keeps contents neat and organized

This Chapin Multipurpose Hand Sprayer is great for spraying weeds, beehives, flowers and plants, cleaning windows and more. It features the Sure Spray™ filter to help prevent clogging. U.S.A. Sprayer Type: Handheld, Tank Size (gal.): 3/8, Pressure (PSI): 45, Spray Pattern: Funnel / straight stream, Pump Type: Piston, Spray Height (ft.): 3 - 6, Broadcast Width (ft.): 0.25, Flow (oz./min.): 0.221, Seal Type: Nitrile, Dimensions L x W x H (in.): 12 x 8 1/2 x 8 1/2 Wide-mouth bottle is easy to fill and clean Designed with an ergonomic handle and built-in wand holder

This Fairbanks Soft Tread Swivel Caster easily rolls over door sills, ramps and other floor obstructions. Wheel Diameter (in.): 3, Caster Type: Swivel, Wheel Type: Soft rubber, Capacity (lbs.): 125, Wheel Width (in.): 1.25, Bearing Type: Plain, Mount Height (in.): 4, Overall Height (in.): 4 1/2, Post (in.): 1/2 - 13 x 1, Finish Type: Zinc-plated, Casters (qty.): 1 Rugged kingpin construction Cold-formed for added strength and durability Rust-resistant electro-galvanized zinc finish Soft rubber wheel

Patterned after the U.S. Armed Forces legendary steel ammo box, this 6 1/2in.L x 15in.W x 8in.D dry box is ideal for both commercial and industrial applications. Extra-thick-walled copolymer construction stands up to extreme weather and rough handling. Foam rubber lid gasket seals out moisture. Reinforced steel pin hinge system. Heavy-duty lockable steel bar latch keeps contents safe.

This Martin Wheel Inner Tube with a straight valve stem is ideal for low-speed applications. Fits Tire Size: 15/600-6in, Valve Type: Straight Includes straight valve stem

This 12in. Martin Wheel Inner Tube is perfect for both high- and low-speed trailer applications including light truck, trailer and agricultural use. Fits Tire Size: 450/530-12, Valve Type: Straight Fits 450/530-12 tires High-quality butyl rubber meets the most demanding requirements Includes straight valve stem

This Martin Wheel Inner Tube is ideal for low-speed applications. Fits Wheel Size (in.): 6, Fits Tire Size: 530/450-6, Valve Type: Bent valve stem - TR87 Includes bent valve stem

This 8in. Martin Wheel Inner Tube is perfect for both high- and low-speed trailer applications including light truck, trailer and agricultural use. Fits Tire Size: 500/570-8, Valve Type: Straight Fits 500/570-8 tires High-quality butyl rubber meets the most demanding requirements Includes straight valve stem

Easily holds gate in any desired position, preventing it from swinging and sagging. Can also be used horizontally as a slide latch. Fits round tube gates 1 3/4in.-2in. outer diameter. U-bolts included. Application: Gate anchor, Works With: 1 3/4in. - 2in. round tube gates, Battery Required: No, Battery Included: No  12 11/16in.L from the bottom of the mounting plate to the bottom of the rod, when pushed all the way down to the handle

Use these Portable Winch Shackles to anchor a pulley or as an anchor for doubling your rope. U.S.A. Application: Shackle, Capacity (lbs.): 4,000, Works With: Pulley, Capacity (Ton): 2  1/2in. 2-ton working load

1:32 scale heavy-duty truck replicas feature die-cast cab and functional door, moving wheels and lifelike details. Each with authentic colors, realistic graphics and various moving parts. Ideal for both collectors and kids. Scale Size: 1:32, Material Type: Die-cast metal, Movement: Functional door, moving wheels, and other moving parts, Dimensions L x W x H (in.): 6 1/2 x 3 x 3, Items Included: (1) Dodge power wagon - Marine Corps

This Stiletto 18in. curved hickory handle is designed for use with their 21-oz. steel framing hammer (Item# 2500105). U.S.A. Handle Type: Curved Hickory, Handle Length (in.): 18, Works With: Stiletto 21 oz. Steel Framing Hammer

Extra-long neodymium pickup w/locking hinge. Has a 5-lb pull. Swivel in any direct then hold in place with the locking hinge. Extends to 24 inches. Magnet in the tip is neodymium, the strongest magnet material available. Retrieve objects in hard to reach areas. Product Style: Retrieving magnet, Material: Neodymium (earth magnet), Pulling Power (lbs.): 5, Height (in.): Extends to 24

This 12in. Martin Wheel Inner Tube is perfect for both high- and low-speed trailer applications including light truck, trailer and agricultural use. Fits Tire Size: 400/480-12, 480-12, 5.0-12, Valve Type: Straight Fits 400/480-12, 480-12 and 5.0-12 tires High-quality butyl rubber meets the most demanding requirements Includes straight valve stem

Ball end hex keys save time by allowing you to insert the ball end into the screw head quickly, from up to a 25° angle, even when working in blind locations. Youll find ball end tools work efficiently, even near obstructions. High-quality machining means smooth rotational action, extended tip life and reduced fastener wear. Ball end tools are made of Protanium® high torque steel, which is up to 20% stronger, with more torque and twice the wear resistance of standard grades of steel. Protected with ProGuard™ corrosion-resistant finish. U.S.A. Total Hex Keys (qty.): 1, Hex Tool Type: Ball end, SAE (in.): 5/8 Long arm length 9.8in. (248mm)

The Plano Double Cover LockJaw Organizer is an impact resistant organizer with 2 levels of storage capacity and removable dividers to create compartments to suit your needs, a built-in handle and secure LockJaw latches for transporting or storing your small parts, tools and accessories. Great for the garage, shop, vehicle, camper, home, collections, crafts & hobbies, etc. U.S.A. Application: Organizing small parts, Dimensions W x D x H (in.): 14 1/2 x 11 3/4 x 3 3/8, Dividers (qty.): Makes 15–52 compartments, Material: Impact-resistant plastic Porsche Red/clear Cover Impact resistant-plastic (3) Two LockJaw latches for secure transport and storage Removable dividers to make 15 to 52 adjustable compartments Built-in handle Great for organizing small parts, tools and accessories Clear cover for easy viewing without opening Flat top for easy storage and stacking

This Martin Wheel Inner Tube with a straight valve stem is ideal for low-speed applications. Fits Wheel Size (in.): 13, Fits Tire Size: 175/80R-13in., Valve Type: Straight valve stem - TR13 Includes straight valve stem Fits tire sizes 16x650-8, 16x750-8, 18-650-8

Chrome molybdenum impact adapter combines strength and durability for heavy-duty impact applications. Laser-etched for easy identification. Drive (in.): 3/4, Adapts Drives (in.): 3/4 drive to 1 drive, Pieces (qty.): 1, Material Type: Chrome molybdenum

Chrome molybdenum impact adapter combines strength and durability for heavy-duty impact applications. Laser-etched for easy identification. Drive (in.): 3/4, Adapts Drives (in.): 3/4 drive to 1/2 drive, Pieces (qty.): 1, Material Type: Chrome molybdenum

This Titan Industries metric flex ratcheting wrench features a flex head design that allows it to reach confined areas. 14mm wrench 72 fine tooth ratchet design for fast performance Less than 5 degree sweep for use in tight spots Chrome vanadium construction Flex head design makes it a great choice for confined areas

This Titan Industries metric flex ratcheting wrench features a flex head design that allows it to reach confined areas. 16mm wrench 72 fine tooth ratchet design for fast performance Less than 5 degree sweep for use in tight spots Chrome vanadium construction Flex head design makes it a great choice for confined areas

Chromium molybdenum impact extension bar combines strength and durability for heavy-duty impact applications. Laser-etched for easy identification. Drive (in.): 3/4, Pieces (qty.): 1, Extension Length (in.): 4, Material Type: Chromium Molybdenum

Roughneck 24-oz. ball-peen hammer is made of hardened, tempered drop forged alloy steel. Fiberglass handle. Polished head and cheeks. Hammer Weight (oz.): 24, Handle Type: Fiberglass

Roughneck 24in. wrecking bar is made of hardened, tempered drop-forged alloy steel. Hex bar, polished tips. Pry Bar Type: Wrecking, Pieces (qty.): 1, Tool Length (in.): 24, Material Type: Hardened, Tempered Drop Forged Alloy Steel

Small rubber clamps hold objects 1in. to 1 1/2in. in diameter. Working load is 22 lbs. per clamp. Made of transportation-grade rubber. UV resistant. Will not rust or corrode. Mounts with one #10 bolt or screw (not included). U.S.A.

This Titan mini ratchet is ideal for working in confined areas. 3/8in. drive, 3in. mini ratchet 72 Tooth ratchet design Ideal for working in confined areas.

The Triton Products magnetic socket holder secures 10 sockets in place on any smooth metal surface without magnetizing them. Works with shallow or deep sockets in SAE or metric sizes. 2in. x 15 5/8in. Holds 10 3/8in. drive sockets Holder secures sockets in place on any smooth metal surface without magnetizing them Works with shallow or deep sockets in SAE or metric sizes Magnets retain strength permanently and are grease-, oil- and chemical-resistant Rust-resistant polymer base

The Triton Products magnetic socket holder secures 10 sockets in place on any smooth metal surface without magnetizing them. Works with shallow or deep sockets in SAE or metric sizes. 1 7/8in. x 16 5/8in. Holds 10 1/2in.-drive sockets Holder secures sockets in place on any smooth metal surface without magnetizing them Works with shallow or deep sockets in SAE or metric sizes Magnets retain strength permanently and are grease-, oil- and chemical-resistant Rust-resistant polymer base

Heavy-duty dividable grid containers can be used in industrial, commercial, electronic and health care industries for storage, assembly, fabrication and distribution applications. These containers offer the safest and most efficient method of compartmentalizing and protecting small to medium sized parts. Dividers allow you to customize the containers interior to meet your exact needs. U.S.A. Bin Color: Blue, Bin Dimensions L x W x H (in.): 22 1/2 x 17 1/2 x 3, Bin Type: Dividable Grid Containers, Bins Included (qty.): 1, Long Divider Item Number (s): 2786090, Short Divider Item Number (s): 2786091, Cover Item Number (s): 2786092B, 2786092G, 2786092R, Label Item Numbers (s): 278601

Heavy-duty dividable grid containers can be used in industrial, commercial, electronic and health care industries for storage, assembly, fabrication and distribution applications. These containers offer the safest and most efficient method of compartmentalizing and protecting small to medium sized parts. Dividers allow you to customize the containers interior to meet your exact needs. U.S.A. Bin Color: Gray, Bin Dimensions L x W x H (in.): 22 1/2 x 17 1/2 x 3, Bin Type: Dividable Grid Containers, Bins Included (qty.): 1, Long Divider Item Number (s): 2786090, Short Divider Item Number (s): 2786091, Cover Item Number (s): 2786092B, 2786092G, 2786092R, Label Item Numbers (s): 278601

Heavy-duty dividable grid containers can be used in industrial, commercial, electronic and health care industries for storage, assembly, fabrication and distribution applications. These containers offer the safest and most efficient method of compartmentalizing and protecting small to medium sized parts. Dividers allow you to customize the containers interior to meet your exact needs. U.S.A. Bin Color: Red, Bin Dimensions L x W x H (in.): 22 1/2 x 17 1/2 x 3, Bin Type: Dividable Grid Containers, Bins Included (qty.): 1, Long Divider Item Number (s): 2786090, Short Divider Item Number (s): 2786091, Cover Item Number (s): 2786092B, 2786092G, 2786092R, Label Item Numbers (s): 278601

Hose barb and clamp allows spray wand and shutoff valve to be used with most tank sprayers. Wand Length (in.): 22, Spray Pattern: Jet stream to fine mist, Adjustable Spray: Yes, Fitting Size (in.): 3/8

SmartStraps® Winch Strap with Flat Hook is made with heavy-duty polypropylene webbing. Breaking Strength (lbs.): 5,000, Strap Width (in.): 2, Strap Length (ft.): 20, Straps (qty.): 1 Yellow webbing Not for lifting

This lance is designed to fit all NorthStar® pressure washer units. 18.5 in. long M22 on thread end, 1/4in. quick couple on other end Designed to fit all NorthStar® pressure washer units Replacement parts are available through Northern Tool Parts Department 1-800-270-0810

Solid steel, cold-formed ball for heavy-duty trailering. Max. Gross Trailer Weight (lbs.): 10,000, Ball Diameter (in.): 2 5/16, Shank Diameter (in.): 1 1/4, Shank Length (in.): 2 3/4, Includes (qty.): 1, Plated: Chrome

High-tensile steel hook measures 14in.L and is 7/8in. thick with a 3/8in. chain hole. U.S.A. Product Style: Towing hardware, Working Load (lbs.): 3,000, Length (in.): 14, Material: Steel Spacing between shank and hook end: 4in.

NEMA L14-20 male power cord plug. Max. generator running watts is 5000. Max. generator input is 20A@125/250 Volts. Plug is UL listed, impact-resistant. 5-year limited warranty. U.S.A. Connector Type: Male plug, Amps: 20, Volts: 125 / 250, Watts: 5,000, UL Listed: Yes

Flexible in temperatures down to 45°. Powercoil® collar and coupling for eliminates kinks. U.S.A. Application: Garden, Diameter (in.): 5/8, Hose Length (ft.): 50, Color: Green, Material: 3-ply reinforced vinyl All-weather flexible to 45°F Microshield™ antimicrobial protection guards against mold and mildew Powercoil® collar eliminates kinking at the faucet Powercoil® coupling for maximum fit at the faucet Guaranteed not to kink or tangle Self-straightening

For quick and easy removal and installation of 4-slot front axle lock nuts on many 1/2- to 3/4-ton trucks. Single, Pair, or Set: Single, Vehicle Make: 4-wheel drive, Common Usage: Removal and installation of lock nuts, Works With: Lock nut tool, Drive (in.): 1/2, Material Type: CR-MO alloy steel, Storage Case Included: No, Includes: (1) Spindle socket, Pieces (qty.): 1 Reinforced outer lug sleeve for heavy-duty applications For use on 1980 through 1996 Ford F-150, F-250, F-350 and full-size Bronco with Dana 44 front axle; 1984 through 1992 Ford Ranger and Bronco II with manual hubs; 1990 through 1993 Dodge Trucks with automatic hubs

Combination wrench features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. In satin finish. Pieces (qty.): 1, Metric Size(s) (mm): 38, Material Type: Chrome vanadium steel, Finish Type: Satin

Milwaukees Standard/Deep Cut Portable Band Saw Blade is designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 14/18, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): 0.20, Cutting Thickness (in.): 5/32 - 5/16, Blades (qty.): 1 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For interrupted cutting in structurals and profiles 5/32in. to 5/16in. thick

Optional clear see-through window doubles storage capacity and allows for easy inspection of parts. Can be removed while bins are stacked.U.S.A. Accessory Type: Clear window, Bin Type: Giant Stack Containers, Pieces (qty.): 1, Compatible With Item Number (s): 278260

This Gilmour fiber soaker hose provides gentle, even watering. U.S.A. Application: Soaker, Hose Length (ft.): 50 Easy-to-handle hose Superior flexibility, Efficient, water-saving choice for watering specific areas

Durable high-density polyethylene space saving bins. Holds up to 100 lbs. Features a label holder to identify stock. Chemical resistant. Hopper front, ensures easy access. U.S.A. Bin Type: Giant stack containers, Bin Color: Blue, Bin Dimensions L x W x H (in.): 17 1/2 x 16 1/2 x 12 1/2, Material Type: High density polyethylene, Bins Included (qty.): 1, Bin Window Item Number (s): 278271

Irwin Tools Pro Pliers include a 6in. slip joint pliers with a hardened cutting edge and a 10in. groove joint pliers with right angle teeth for maximum bite. Pieces (qty.): 2, Case Included: No, Lap Joint Cutting Pliers (qty.): (1) 10in., Slip Joint Pliers (qty.): (1) 6in. Slip joint pliers have hardened cutting edge Groove joint pliers have right angle teeth for maximum bite Anti-pinch soft grip handle design for less hand fatigue

Pieh Tool Beeswax is combined with other materials to leave a deep, lustrous glow to ironwork. They can be used for exterior and interior work. Generally, blacksmiths blend equal parts of paste wax, linseed oil, and turpentine. A smaller volume of beeswax is then added. Beeswax can also be used by itself. Unlike other waxes, beeswax is nontoxic and can be used on cutlery and utensils. For best results, ironwork should be warm (can hold in your hand) when applying the wax finish. Just rub it on metal to finish off your work or use it for a gentle quench for your punches. U.S.A.

Durable high-density polyethylene space saving bins. Holds up to 100 lbs. Features a label holder to identify stock. Chemical resistant. Hopper front, ensures easy access. U.S.A. Bin Type: Giant stack containers, Bin Color: Gray, Bin Dimensions L x W x H (in.): 17 1/2 x 16 1/2 x 12 1/2, Material Type: High density polyethylene, Bins Included (qty.): 1, Bin Window Item Number (s): 278271

Durable high-density polyethylene space saving bins. Holds up to 100 lbs. Features a label holder to identify stock. Chemical resistant. Hopper front, ensures easy access. U.S.A. Bin Type: Giant stack containers, Bin Color: Red, Bin Dimensions L x W x H (in.): 17 1/2 x 16 1/2 x 12 1/2, Material Type: High density polyethylene, Bins Included (qty.): 1, Bin Window Item Number (s): 278271

U.S.A. Line Pull (lbs.): 5,000, Strap: 20 x 2

U.S.A. Strap: 25 x 2, Load Capacity (lbs.): 5,000 Strap with Hook

Titan quick-release bit extension is designed for working in hard-to-reach areas. Works With: Drill Bits in Confined Areas, Pieces (qty.): 1, Extension Length (in.): 18, Magnetic: Magnetic chuck Internal rotating shaft Allows user to hold the outside of extension to work in confined spaces Low-profile auto-locking magnetic chuck Quick-release function for fast bit changes

This set of ten carriage bolts and elastic stop zinc nuts replaces similar OEM items in Western snowplow cutting edges. Hardware Type: Carriage bolt and nut, Compatible With: Western plows, Size (in.): Bolts are 1/2 x 3 1/2 and nuts are 1/2, Single, Pair, or Set: Set of 10 each, Storage Case Included: No

This hose keeps your plow going by replacing OEM parts. Replaces Blizzard Part# B60091. U.S.A. Hose Diameter (in.): 3/8, Compatible With: Blizzard hydraulic hoses, Hose (in. x ft.): 3/8 x 24

Mechanix Wear FastFit gloves are simple, effective and always useful. All-purpose design and high-end features make gloves an ideal, economical choice for a wide variety of jobs. Lycra® insert panels between fingers provide comfort and mobility; Clarino® MWX-2 synthetic leather palm offer protection and improved grip. Size: M, Color: Red, Material: Two way stretch spandex, Cuff Material: Elastic, Palm Material: Clarino® MWX-2 synthetic leather, Pairs (qty.): 1 Two-way stretch spandex padded back Concealed interior seam stitching prevents snagging Elastic cuff opening with wrist pad Lycra® insert panels Synthetic leather fingertip reinforcements provide strength and protection Supple, breathable, durable synthetic leather palm

Mechanix Wear FastFit gloves are simple, effective and always useful. All-purpose design and high-end features make gloves an ideal, economical choice for a wide variety of jobs. Lycra® insert panels between fingers provide comfort and mobility; Clarino® MWX-2 synthetic leather palm offer protection and improved grip. Size: XL, Color: Red, Cuff Material: Elastic, Palm Material: Clarino® MWX-2 synthetic leather, Pairs (qty.): 1 Two-way stretch spandex padded back Concealed interior seam stitching prevents snagging Elastic cuff opening with wrist pad Lycra® insert panels Synthetic leather fingertip reinforcements provide strength and protection Supple, breathable, durable synthetic leather palm

Mechanix Wear FastFit gloves are simple, effective and always useful. All-purpose design and high-end features make gloves an ideal, economical choice for a wide variety of jobs. Lycra® insert panels between fingers provide comfort and mobility; Clarino® MWX-2 synthetic leather palm offer protection and improved grip. Size: L, Color: Red, Material: Two way stretch spandex, Cuff Material: Elastic, Palm Material: Clarino® MWX-2 synthetic leather, Pairs (qty.): 1 Two-way stretch spandex padded back Concealed interior seam stitching prevents snagging Elastic cuff opening with wrist pad Lycra® insert panels Synthetic leather fingertip reinforcements provide strength and protection Supple, breathable, durable synthetic leather palm

Mechanix Wear FastFit gloves are simple, effective and always useful. All-purpose design and high-end features make gloves an ideal, economical choice for a wide variety of jobs. Lycra® insert panels between fingers provide comfort and mobility; Clarino® MWX-2 synthetic leather palm offer protection and improved grip. Size: 2XL, Color: Red, Material: Two way stretch spandex, Cuff Material: Elastic, Palm Material: Clarino® MWX-2 synthetic leather, Pairs (qty.): 1 Two-way stretch spandex padded back Concealed interior seam stitching prevents snagging Elastic cuff opening with wrist pad Lycra® insert panels Synthetic leather fingertip reinforcements provide strength and protection Supple, breathable, durable synthetic leather palm

Protect your Wovel shovel by attaching this wear strip when you use it under intense conditions. Quickly attaches to the front of the shovel blade. U.S.A. Width (in.): 2, Dimensions L x W x H (in.): 26 x 2 x 3/4, Water Resistant: Yes, Single, Pair, or Set: Single No tools required

Heavy-duty dividable grid containers can be used in industrial, commercial, electronic and health care industries for storage, assembly, fabrication and distribution applications. These containers offer the safest and most efficient method of compartmentalizing and protecting small to medium sized parts. Dividers allow you to customize the containers interior to meet your exact needs. U.S.A. Bin Color: Blue, Bin Dimensions L x W x H (in.): 16 1/2 x 10 7/8 x 8, Bin Type: Dividable Grid Containers, Bins Included (qty.): 1, Long Divider Item Number (s): 2786080, Short Divider Item Number (s): 2786081, Cover Item Number (s): 2786062B, 2786062G, 2786062R, Label Item Numbers (s): 278603

Heavy-duty dividable grid containers can be used in industrial, commercial, electronic and health care industries for storage, assembly, fabrication and distribution applications. These containers offer the safest and most efficient method of compartmentalizing and protecting small to medium sized parts. Dividers allow you to customize the containers interior to meet your exact needs. U.S.A. Bin Color: Gray, Bin Dimensions L x W x H (in.): 16 1/2 x 10 7/8 x 8, Bin Type: Dividable Grid Containers, Bins Included (qty.): 1, Long Divider Item Number (s): 2786080, Short Divider Item Number (s): 2786081, Cover Item Number (s): 2786062B, 2786062G, 2786062R, Label Item Numbers (s): 278603

This Metaltech exterior guard rail features secure and safe steel tube construction with a blue textured antislip powder-coat finish. It meets all OSHA requirements. Hardware Type: Guardrail, Material Type: Steel Support has bolt-on clamp for added safety and stability 81in. length

Designed for use with 3-pt. quick-hitches, like Item# 508330, NorTrac 3-Pt. Category 1 Quick Hitch. 4in.L x 7/8in. dia. Application: Bushing set, Category Type: 1

Create a large nest ground for the bird of your choice with this snap-together birdhouse. Includes replaceable entrances suitable for Martins, Tree Swallows or Blue Birds. U.S.A. Application: Bird housing, Mounting Type: Hang, Compatible With: Martins, Tree Swallows, Blue Birds, Includes: Clean out port and nonslip interior, Assembly Required: Yes Heat and Cold regulation

This Wel-Bilt™ headlamp gives you powerful 180° handsfree illumination. Weather-resistant construction for use in poor conditions. Overall Length (in.): 3 1/4, Bulb Type: (1) Watt, Bulbs (qty.): 1, Bulb Life (hrs.): 10,000+, Light Output (Lumens): 60, Watts: 1, Full Load Run Time (Hours): 4, Battery Included: No, Battery Type: (3) AAA, Includes (qty.): 1 Provides 60 Lumens with a 4 hour runtime on 3 AAA batteries Weather resistant design with adjustable head strap Not related to WELBILT® products of Enodis companies

Line Pull (lbs.): 4,200, Rope Type: Steel cable, Rope Size L x dia. (ft. x in.): 25 x 3/16 Breaking Capacity: 4200 Lbs. with a Working load capacity of 840 lbs.

Tool-box size grease gun is perfect for hard-to-reach places. Pistol-grip design allows for easy one-hand operation. Includes grease gun with rigid pipe and coupler, and one 3 oz. multipurpose grease cartridge. Capacity: 3 oz., Cordless: Yes, Application: Manual mini grease gun, Grease Fittings: Rigid pipe and coupler, Case Included: No, Includes: 3-oz. multipurpose grease cartridge

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 100% cotton jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: XL, Material: 100% cotton jersey, Collar Style: Rib crew neck, Color: Heather gray, Pockets: 1, on left

This NPower inverter cable is designed for use with the NPower 1000 Watt inverter (Item# 4571001) and 1500 Watt inverter (Item# 4572000). Set of 2. Accessory Type: Cable, Amps: 300, Compatible With: NPower 1000W inverter and 1500W inverter, Watts: 1,000 to 1,500, Cable Length (ft.): 3, Cable Gauge: 6, Cable Sets Included: 1 Stranded conductors for flexibility 300 Amp ring terminals with soldered ends

Ultra-Tow round tube jack footplate supports 2000 lbs. and fits 2in. jack tubes. 7 3/4in.L x 4 1/4in.W footplate. Support Capacity (lbs.): 2,000, Additional Lift Height (in.): 8 3/4, Fits Jack Tube (in.): 2, Foot Type: Plate, Foot Dimensions L x W (in.): 7 3/4 x 4 1/4, Lynch Pin Size (in.): 3/8, Lynch Pin Included: Yes

The JBC Revolution Series utilizes premium grade PVC injection molding technology to produce extremely durable traffic cones. Meets NCHRP-350 and MUTCD requirements. Lime. Height (in.): 18, Color: Lime, Reflective: No, Material: PVC, Cones Included (qty.): 1 Strategically placed cavities in base allow cone to absorb repeated impacts with no damage Circle interlocking system allows 2-pc. cone to work as single, practically indestructible unit Stippled inside to eliminate sticking Meets NCHRP-350 and MUTCD requirements 100% recyclable

12-pt. jumbo socket features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. Drive (in.): 3/4, Point Size (qty.): 12, Metric Socket Size (mm): 50, Material Type: Chrome Vanadium, Standard: Yes

12-pt. jumbo socket features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. Drive (in.): 3/4, Point Size (qty.): 12, Metric Socket Size (mm): 54, Material Type: Chrome Vanadium, Standard: Yes

12-pt. jumbo socket features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. Drive (in.): 3/4, Point Size (qty.): 12, Metric Socket Size (mm): 55, Material Type: Chrome Vanadium, Standard: Yes

This 1/4in., 1-wire Apache reusable fitting is designed for female SAE 37 applications. Female SAE 37° swivel connection. Fitting Size (in.): 1/4, Wire: 1 Fitting stem threads into hose and ferrule Requires 2 wrenches

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 90% cotton / 10% polyester jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: 2XL, Material: 90% cotton / 10% polyester, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Heather gray, Pockets Included (qty.): (1) Left chest pocket

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 100% cotton jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: 2XL, Material: 100% cotton, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Navy, Pockets Included (qty.): (1) Left chest pocket

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 90% cotton/10% polyester jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: L, Material: 90% cotton / 10% polyester, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Heather gray, Pockets Included (qty.): (1) Left chest pocket

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 90% cotton / 10% polyester jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: M, Material: 90% cotton / 10% polyester, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Heather gray, Pockets Included (qty.): (1) Left chest pocket

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 100% cotton jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: L, Material: 100% cotton, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Navy, Pockets Included (qty.): (1) Left chest pocket

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 100% cotton jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: M, Material: 100% cotton, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Navy, Pockets Included (qty.): (1) Left chest pocket

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 100% cotton jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Item is on backorder until early August. Size: S, Material: 100% cotton, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Navy, Pockets Included (qty.): (1) Left chest pocket

Comfortable Carhartt® cotton T-shirt is a great choice on or off the jobsite. Made of lightweight 4.7-oz., 100% cotton jersey knit, it features a rib-knit crew neck, side seam construction to minimize twisting, tagless neck label and a handy left chest pocket. Rolled-forward shoulder for extra comfort. Size: XL, Material: 100% cotton, Material Weight (oz.): 4.7, Collar Style: Rib crew neck, Color: Navy, Pockets Included (qty.): (1) Left chest pocket