The IRWIN Marathon 12in. 100-tooth circular saw blade is designed tough and long lasting for the professional. The thin kerf design provides faster, cleaner cutting action as less material is being removed. The hardened plate runs truer and avoids warping. C3 carbide tips provide long life and are impact resistant. The specifically engineered heat vents reduce heat and resin build up which can lead to blade binding and warping. Marathons unique shoulder design puts more support behind each tooth and provides for consistent chip removal. Marathon saw blades are truly “Long Distance Runners.” Blade Use: Trim and Finish, Blade Diameter (in.): 12, Teeth (qty.): 100, Tooth Grind: 400 grit diamond ground, Tip Type: Construction micro grain carbide, Reinforced Shoulder: Yes, Engineered Venting: Yes, Professional Series: Yes, Blades (qty.): 1 Thin kerf for fast cuts Construction micro grain carbide teeth for longer life Diamond ground teeth for faster, cleaner cuts Precision tensioned and balanced plate for an accurate and true cut Reinforced shoulder for added durability Model 14084

Battery Amp/Hour: 2.6, Battery Type: Ni-MH, Volts: 12, Environmentally Friendly: Yes Ni-MH batteries have greater capacity and a longer run time than standard Nickel Cadmium (Ni-Cd) batteries 193157-5 No memory effect

Northern Industrial Bench Grinder features solid construction and a powerful 3/4 HP motor to give you the ability to clean, buff, sharpen, debur and more. Wide, stable base provides room to maneuver materials while grinding without compromising benchtop workspace. Wheel Diameter (in.): 8, Amps: 3.6, Speed (RPM): 3,550, HP: 3/4, Spindle Thread Size: 5/8, Wheel Included: Yes, (1) Coarse, (1) Medium, Case Included: No 120V 60 Hz motor Low noise Adjustable shields makes grinding of different size materials easy Aluminum oxide wheels with flanges Adjustable tool rest and eye shield UL listed

Even tougher than high speed steel bits - last 30 times longer than standard drill bits! Bores stainless, silicon-chrome, chrome-nickel - even armor and plate Includes metal case; U.S.A. Includes (qty.): 21, Bores: Stainless, silicon-chrome, chrome-nickel, armor and plate, Case Included: Yes, Size: 1/16in. - 1/2in. by 64ths, Finish Type: Cobalt

The Milwaukee M12™ Screwdriver has the power to drive the majority of common small fasteners and the run time of full-day screw driving without recharging. The compact size allows the users to work in tight places for increased convenience. Max. Torque (in.-lbs.): 150, Volts: 12, Speed - No Load (RPM): 0 - 500, Chuck Size (in.): 1/4, Keyless Chuck: Yes, Clutch Settings: 14 + 1, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 7, Tool Weight (lbs.): 1.6 Tool only; battery sold separately Built-in LED light Metal gear housing 1/4in. hex chuck allows one-handed bit changes Built-in battery fuel gauge displays remaining run time Overmold side and grip

This Northern Industrial 7in. wet tile saw delivers ample power to cut a variety of wall and floor tile sizes. Can also cut granite tiles. All-metal saw is very sturdy. A great value for residential tile work. Rated Watts: 500, Engine Speed (RPM): 3,400, Cutting Thickness (in.): 1 3/8, Blade Diameter (in.): 7, Arbor Size (in.): 5/8 Height: 6.8in. Not for masonry 120 Volt, 60 Hz motor 1.4in. max. depth of cut @ 90°, 1in. @ 45° 15in. x 15 1/2in. table Includes splash guard to keep spray and dust to a minimum Removable blade cooling reservoir for easy cleaning

Efficiency and productivity are taken to new levels with the M12™ AC/DC Wall and Vehicle Charger. This dually functional unit charges M12 Li-Ion batteries in either a standard wall outlet or vehicle DC outlet. Compatible With: M12 Li-Ion battery, Battery Charging Time (hrs.): 1, Battery Type: M12 Li-Ion battery, LED Indicators: Yes, Dimensions L x W x H (in.): 9 7/16 x 4 5/16 x 12 7/16, Diagnostics Alert/Display: Yes, Portable: Yes, Items Included: (1) AC/DC charger

Compatible With: Makita batteries, Battery Amp/Hour: 1.3 - 3.0, Battery Type: Ni-MH and Ni-Cd batteries, Volts: 7.2 - 18, Portable: Yes Plugs into cigarette lighter to charge batteries

The Milwaukee® M12™ Cordless Lithium-Ion Rotary Tool utilizes a powerful 12V motor and Milwaukees Redlithium™ battery technology (battery sold separately) to produce unmatched performance and increased run time. The size and versatility of this cordless rotary tool make it an indispensable tool for maintenance contractors, electricians, plumbers, remodelers and more. The tool runs from 5,000–32,000 RPM and is managed by a variable speed dial for fluid control. The collet is completely compatible with all 1/32in.–1/8in. shank accessories providing the user access to thousands of cutting, grinding, sanding and polishing solutions. SAVE MONEY by replacing or adding specific tools that work with the M12 Lithium-Ion battery and charger you already own. The Milwaukee M12 bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Milwaukee bare tool to your M12 cordless system today. Cordless: Yes, Amps: 12, Speed - No Load (RPM): 5,000 – 32,000, Lights: No, Collet Diameter (in.): 1/8, Battery Included: No, Tool Length (in.): 9 1/2, Tool Weight (lbs.): 1 5/16, Charger Included: No, Case Included: No Tool only; battery sold separately Powerful 28V motor delivers unmatched performance under load 1/8in. collet is compatible with all current rotary tool accessories Variable speed (5000–32,000) is up to 10% faster than the competition Compact and lightweight, only 9.5in. long and 1.3 lbs. Grinder style exhaust ports and protected front bearing deliver up to 10X the tool life

This Timber Tuff Universal Sharpener/Grinder Stand fits most sharpeners and bench grinders. Its height adjusts from 34in. to 55in., making it perfect for using while sitting or standing. A locking collar with pin holds the unit at the desired height. Height (in.): 34 - 55  3-legged base for stability Powder-coat finish resists rust

Stubby 3/8in.-drive Torx, tamperproof Torx and metric Allen bits are designed to fit into confined areas. Made of S-2 steel, heat-treated for maximum tensile strength. Blow molded case. Includes (qty.): 33, Diameter (in.): 3/8, Case Included: Yes All bits 1in. long Useful in confined areas

This Northern Industrial 7 1/4in. 15 Amp circular saw features a die-cast magnesium gear housing that delivers the ideal combination of light weight and durability. Features a built-in laser cutting guide for accuracy. Cordless: No, Blade Diameter (in.): 7 1/4, Amps: 15, Volts: 120, Speed - No Load (RPM): 5,000, Bevel Capacity (deg): 0–45°, Cutting Depth at 90° (in.): 2 9/16in, Cutting Depth at 45° (in.): 1 5/8in, Blade Included: Yes Laser guide system for quick setup and accuracy Integrated laser system is powered by tool and turned on with convenient button Bevel cuts 0–45° 2 9/16in. maximum cutting depth @ 90°; 1 5/8in. @ 45° Magnesium gear housing for lightweight durability Ergonomic front and rear handles Onboard wrench storage Externally accessible brushes Includes 24T carbide blade and rip guide

Milwaukees Digital Power Management System helps to ensure optimal battery life and runtime and protects the battery and tool during the toughest jobsite applications. Lithium Ion battery packs offer increased runtime with 40% less weight compared to an 18V NiCad battery. Compatible With: Various Hand Tools, Battery Amp/Hour: 1.4, Battery Type: 18V NiCad, Volts: 18, Low Battery Indicator: Yes, Portable: Yes, Items Included: (1) Battery 1.4Ah Works with Item# 2601 M18 Compact Drill/Driver, 2650 M18 1/4in. Hex Impact Driver, 49240171 M18 Work Light, 088020 18V Cordless Vacuum

Big cobalt-coated bits will far outlast ordinary bits. In sizes up to 1in. Includes (qty.): 8, Case Included: Yes, Size: 9/16in., 3/16in., 5/8in., 7/8in., 11/16in., 15/16in., 3/4in., 1in., Finish Type: Cobalt Durable cobalt-coated bits have 1/2in. shanks

This Northern Industrial 9.5 Amp reciprocating saw features a die-cast magnesium gear housing that delivers the ideal combination of light weight and durability. Blade changes are fast and require no tools. Cordless: No, Volts: 120, Strokes Per Minute (SPM): 0 – 2,500, Case Included: Yes Adjustable pivoting front shoe Tool-less quick change blade system Rubberized grips on front boot and rear handle for comfort and control Magnesium gear housing for lightweight durability Swivel ball-joint power cord for fewer tangles Externally accessible carbon brushes Includes 2 blades and heavy-duty storage case

Ingersoll Rand IQv Series lithium ion batteries pack smart voltage into lightweight packages. Designed for use with IQv Series tools; choose the battery for your application. Compatible With: IQv Series Tools, Battery Amp/Hour: 2.4, Battery Type: Lithium Ion, Volts: 7.2, Dimensions L x W x H (in.): 4 x 3 x 4 Unique on-battery digital display indicates charge level at all times IQv Grip twist-to-lock battery interface ensures snug battery-tool connection 2.4 Ah provides up to 30% higher capacity than Ni-Cd and other Lithium Ion batteries Designed for use with IQv Series tools; choose the battery for your application

This Northern Industrial 7in. 15 Amp angle grinder features a die-cast magnesium gear housing that delivers the ideal combination of light weight and durability. Provides ample power for high-torque cutting and grinding. Wheel Diameter (in.): 7, Amps: 15, Speed (RPM): 8,000, Spindle Thread Size: 5/8in., Spindle Lock: Yes, Side Handle: No, Wheel Included: Yes Extended rear handle for balance and comfort Rubberized grips on front and rear handles for comfort and control Magnesium gear housing for lightweight durability Tool-free wheel guard adjustment Swivel ball-joint power cord for fewer tangles Externally accessible carbon brushes Includes 3-position auxiliary handle and 7in. grinding wheel 7/8in. arbor

The Ax™ Sawzall® replacement blade delivers superior durability and fast cutting in nail-embedded wood, plywood, OSB and engineered lumbers. U.S.A. Blade Application: Cutting wood, nail-embedded wood, demolition, Blade Size (in.): 9, TPI (Teeth per Inch): 5/8, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

The Wrecker™ is ideal for general purpose demolition cutting. It delivers exceptional durability cutting through a wide range of materials, including ferrous and non-ferrous metals, plastics, and nail-embedded wood. U.S.A. Blade Application: Cutting wood, nail-embedded wood, plastic, light-gauge non-ferrous material, aluminum, Blade Size (in.): 9, TPI (Teeth per Inch): 8, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

The Torch™ reciprocating saw blade delivers exceptional durability and straighter cuts in pipe, conduit, strut and other metal materials. U.S.A. Blade Application: Cuts metal 1/8in. - 3/16in., conduit, tubing, channels, pipe, rubber, fiber, demolition and remodeling, Blade Size (in.): 9, TPI (Teeth per Inch): 18, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

This heavy-duty 1/2in. spade handle drill from Northern Industrial delivers the high torque you need for tough jobs like drilling steel and wood and mixing buckets of paint and drywall mud. Amps: 9, Chuck Size (in.): 1/2, Speed (RPM): 0 - 850, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes Lock-on button for extended use Adjustable rear spade handle for control in high-torque applications High torque for drilling steel, wood and mixing buckets of paint and drywall mud Externally replaceable brushes Die-cast aluminum housing

The Klutch™ 11 Amp Sander/Polisher delivers the power you need for smoothing wood and metal finishes, preparing a variety of surfaces for painting or refinishing, or polishing metal surfaces with included pad. Speed (RPM): 600 - 3000, Amps: 11, Variable Speed: Yes, Disc Diameter (in.): 7, Wheel Diameter (in.): 7, Tool Length (in.): 17, Tool Weight (lbs.): 7, Case Included: No Electronic variable speed: 600–3000 RPM 5/8in.-11 spindle with lock for quick changes Die-cast aluminum gear housing Hook-and-loop system accepts all standard 7in. sanding and polishing accessories

Milwaukees Random Orbit Palm Sander produces a fine, swirl-free finish. The permanent magnet motor produces dependable speed and power and features electronic soft start and a variable speed dial. Designed for comfort with a tactile rubber top and body grip surface and a narrow sander body. Amps: 3, Variable Speed: Yes, Disc Diameter (in.): 5, Wheel Diameter (in.): 5, OPM: 7,000 – 12,000, Tool Length (in.): 5 1/2, Tool Weight (lbs.): 3.3 lbs., Case Included: Yes, Dust Bag Included: Yes Electronic soft start Universal hook and loop pad Pad cushioning and break Tactile rubber top and body, narrow sander body Integrated vacuum ports Inline dust port with flexible dust collection bag

The Klutch™ 1/2in. Hammer Drill is ideal for drilling in wood, metal, composite materials, masonry and plastic. The drill’s specially designed clutch allows you to select the appropriate mode (drill or hammer-drill) and speed for the type of material being drilled, making this Klutch Hammer Drill one of the most versatile power tools in your collection. Amps: 6.6, Chuck Size (in.): 1/2, Speed (RPM): 0 – 2,700, Cord Length (ft.): 6, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes, Case Included: No, Dimensions L x W x H (in.): 10 x 3 x 8 0–33,000 BPM in hammer drill mode 1/2in. Jacobs® locking keyless chuck

The Ingersoll Rand IQv Series Battery Charger charges both lithium ion (#3359103) and Ni-Cd (#3359104) IQv Series batteries. Also works with all IQv Series batteries. Please allow up to 4 weeks from receipt of the order to ship. Compatible With: IQv Series Batteries, Battery Type: Lithium Ion/Ni-Cd, Dimensions L x W x H (in.): 8 1/4 x 5 1/4 x 2 13/32, Diagnostics Alert/Display: Yes Charges lithium ion (#3359103) and Ni-Cd (#3359104) IQv Series batteries Built-in charge level gauge Advanced diagnostics alert user of memory effect and degradation Renew feature restores dead batteries to like-new condition

The Ingersoll Rand 7.2V 1/4in. Mini Drill is the perfect solution for your tight access drilling needs. Max. Torque (in.-lbs.): 40, Volts: 7.2, Speed - No Load (RPM): 0 – 1,100, Chuck Size (in.): 1/4, Side Handle: No, Battery Included: No 40 in-lbs. of torque Ideal for drilling in metal Tackles small fasteners with ease At 7in.L, works in tight spaces Compatible with all 7.2V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately

Cut perfect holes in METAL, wood or drywall for conduit, plumbing, door lock installation and more. Wear-resistant bi-metal construction and welded high speed steel teeth cut smoother and faster. Bi-Metal: Yes, Saw Size (in.): 7/8, 1 1/8, 1 3/8, 1 3/4, 2, 2 1/2, 3, 3 5/8, 4 1/8, and 4 3/4, Tooth Style: Steel, Saw (qty.): 10-pc.

For use with all 14.4 Volt power plus tools and work lights. U.S.A.

Replacement battery for use with Makita 18V compact series lithium-ion cordless power tools. Compatible With: Makita tools, Battery Amp/Hour: 1.5, Battery Type: Lithium-Ion, Volts: 18, Items Included: (1) Battery

The Milwaukee® M12™ Cordless Palm Nailer provides a portable solution to professional nailing applications without the hassle of an air compressor or hose. The compact size takes this tool places unreachable by a tradition nail gun, while the powerful impacting mechanism handles the most difficult of tasks. The M12 palm nailer also features an onboard fuel gauge, LED worklight, and a convenient hand strap to ensure the highest level of safety and productivity for the user. SAVE MONEY by replacing or adding specific tools that work with the M12 Lithium-Ion battery and charger you already own. The Milwaukee M12 bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Milwaukee bare tool to your M12 cordless system today. Cordless: Yes, Volts: 12, Driving Angle (deg): 90, Nail Diameter (gauge): 6D–16D, Tool Length (in.): 7.5, Tool Weight (lbs.): 3.4, Charger Included: No, Case Included: No, Battery Included: No Tool only; battery sold separately 6D -16D magnetic collet securely holds framing nails for one-handed use All metal gear housing handles tough jobsite conditions Palm style ergonomics delivers superior comfort and control Powerful mechanism delivers 2.2 ft./lbs. of blow energy LED light illuminates work surface Delivers 2700 BPM Drives 16D nail in under 2 seconds Drives 10D strap nail in under 1 second Drives 40D pole barn spike in under 6 seconds Drives up to 100 16D nails per charge Drives up to 200 strap nails per charge

The Klutch™ 14.4V Drill with Li-Ion technology features a comfortable ergonomic design, fast charging time, lighter battery and longer life. Ideal for woodworking, metalworking and other drilling applications. Max. Torque (in.-lbs.): 188, Volts: 14.4, Speed - No Load (RPM): 0 - 350 / 0 - 1150, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: 19+ 1, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 1.3, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Weight (lbs.): 2.60 2-speed gearbox Single-sleeve keyless chuck with automatic spindle lock function Li-Ion battery for extended run time Built-in LED worklight Battery fuel gauge Ergonomic soft-grip handle

The Klutch™ 4 Amp Electric Shear is ideal for cutting various types of metal with smooth, accurate cuts and precise control over straight and curved cuts. Amps: 4, Volts: 120, Cutting Depth (in.): 3/16 - 9/16, Cutting Capacity Aluminum (gauge): 18, Cutting Capacity Galvanized (gauge): 18, Cutting Capacity Sheet Metal (gauge): 18, Cutting Capacity Steel (gauge): 18, Cutting Capacity Mild Steel (gauge): 18, Cutting Capacity Stainless Steel (gauge): 18, Strokes Per Minute (SPM): 2,500, Case Included: No Variable speed Pistol-grip trigger 6ft. power cord

The M12™ Cordless 3/8in. drill driver delivers 250 in-lbs of torque in a compact light weight design. The only tool in its class with an all metal locking chuck, the 2410-22 drills and fastens up to 35% faster than the competition. The on-board fuel gauge displays remaining run time, while a built-in LED illuminates work surface. Max. Torque (in.-lbs.): 250, Volts: 12, Speed - No Load (RPM): 0 – 1,500 / 0 – 400, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 6 3/8, Tool Weight (lbs.): 2.3 Tool only; battery sold separately 3/8in. single sleeve ratcheting metal chuck Integrated LED and fuel gauge

Compatible With: Makita tools, Battery Amp/Hour: 2.6, Battery Type: Ni-MH, Volts: 14.4, Environmentally Friendly: Yes Ni-MH batteries have greater capacity and a longer run time than standard Nickel Cadmium (Ni-Cd) batteries No memory effect Model 193158-3

This Greenworks Extended Run Li-Ion Battery will virtually double runtime when used instead of the standard 2Ah battery. Compatible With: Greenworks outdoor equipment, Battery Amp/Hour: 4.0, Battery Type: Li-Ion, Volts: 24  Works with the Greenworks Polesaw (Item# 24827), Chain saw (Item# 24881), Trimmer (Item# 24882), Hedge Trimmer (Item# 24883), Extended Hedge Trimmer (Item# 24828) and Blower (Item# 24884) Runs at full power through an entire charge  Charges in as little as 3 hours Easily check remaining power with charge indicator lights  Li-Ion batteries can be charged at any power without Memory effect maximum energy capacity loss Lasts up to 2000 charges

The Milwaukee® 1/2in. Chuck Adapter easily converts Model 4270 Magnetic Drill Press arbor to accept up to 6in.L x 1/2in. dia. twist drill bits. Attaches to any 3/4in. Weldon shank machine. Has two flats that are held in place by 2 set screws. U.S.A. Drive (in.): 1/2

The Ax™ Sawzall® replacement blade delivers superior durability and fast cutting in nail-embedded wood, plywood, OSB and engineered lumbers. U.S.A. Blade Application: Cutting wood, nail-embedded wood, demolition, Blade Size (in.): 12, TPI (Teeth per Inch): 5/8, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

The Wrecker™ is ideal for general purpose demolition cutting. It delivers exceptional durability cutting through a wide range of materials, including ferrous and non-ferrous metals, plastics, and nail-embedded wood. U.S.A. Blade Application: Cutting wood, nail-embedded wood, plastic, light-gauge non-ferrous material, aluminum, Blade Size (in.): 12, TPI (Teeth per Inch): 8, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

The Torch™ reciprocating saw blade delivers exceptional durability and straighter cuts in pipe, conduit, strut and other metal materials. U.S.A. Blade Application: Cuts metal 1/4in. - 3/8in., channels, metal pipe, cast iron, demolition, rescue and remodeling, Blade Size (in.): 9, TPI (Teeth per Inch): 10, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

The Torch™ reciprocating saw blade delivers exceptional durability and straighter cuts in pipe, conduit, strut and other metal materials. U.S.A. Blade Application: Cuts metal 3/16in. - 1/4in., channels, metal pipe, cast iron, demolition, rescue and remodeling, Blade Size (in.): 9, TPI (Teeth per Inch): 14, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

The Torch™ reciprocating saw blade delivers exceptional durability and straighter cuts in pipe, conduit, strut and other metal materials. U.S.A. Blade Application: Cuts metal 1/8in. - 3/16in., conduit, tubing, channels, pipe, rubber, fiber, demolition and remodeling, Blade Size (in.): 12, TPI (Teeth per Inch): 18, Blade Material: High speed Matrix II steel w/ 8% cobalt, Tang Style: 1/2in. universal, Tang Size (in.): .5, Reversible: Yes, Blades (qty.): 25, Blade Type: Bi-metal Precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing Thicker, more rigid blade body resists fracturing and bending for maximum durability 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

The Milwaukee one-hour universal NiCd Power Plus 12V DC automotive charger will recharge all Milwaukee Power Plus batteries in 1 hour by plugging into the cigarette lighter in your vehicle. Compatible With: Power Plus batterries, Battery Charging Time (hrs.): 1, Battery Type: Ni-Cd Will recharge all Milwaukee Power Plus batteries Plugs into the cigarette lighter in your vehicle Charges batteries in 1 hour

Compatible With: Makita tools, Battery Amp/Hour: 2.6, Battery Type: Ni-MH, Volts: 18, Environmentally Friendly: Yes Ni-MH batteries have greater capacity and a longer run time than standard Nickel Cadmium (Ni-Cd) batteries 193159-1 No memory effect

Utilizing a duel alternating tooth geometry and a thin wall construction, Milwaukees annular cutters cut up to 15% faster than the competition. The proprietary steel reduces breakage and extends the life of the bit. All Milwaukee annular cutters have a Weldon Shank, perfect for use with most small magnetic drill presses as well as large magnetic drill presses with correct arbor. Length (in.): 2, Shank Diameter (in.): 3/4, Works With: 2-in. ejector pin 3/4in. shank diameter 2in. cutting depth 1 3/8in. diameter Thin-wall design for faster, more efficient cutting Proprietary steel and 3 hardness zones make the bit less susceptible to breakage Flute design lets chips fall freely from cutter Works with 2in. ejector pin (Item# M0477, sold separately)

Even tougher than high speed steel bits - last 30 times longer than standard drill bits! Bores stainless, silicon-chrome, chrome-nickel - even armor and plate Includes metal case; U.S.A. Pieces: 29 Sizes: 1/16in. to 1/2in. in 64ths Includes (qty.): 29, Bores: Stainless, silicon-chrome, chrome-nickel, armor and plate, Case Included: Yes, Size: 1/16in - 1/2in by 64ths, Finish Type: Cobalt

The Milwaukee M18™ Compact Drill Driver has been built to withstand tough jobsite conditions. The tool balance, weight and grip have been optimized to reduce fatigue. Superior bit grip prevents frequent bit retightening and lost bits. Max. Torque (in.-lbs.): 400, Volts: 18, Speed - No Load (RPM): 0 - 350 / 0 - 1400, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 7 3/4, Tool Weight (lbs.): 4 Tool only; battery sold separately 1/2in. ratcheting chuck with plastic sleeve 2-speed metal gearbox Built-in LED light illuminates work surfaces

This powerful Milwaukee 12V Cordless 1/4in. hex impact driver delivers best-in-class performance, featuring a specially designed impact mechanism for top fastening speed. Cordless: Yes, Max. Torque (ft.-lbs.): 70.8, Impacts Per Minute (IPM): 0-3,000, Drive (in.): 1/4 hex, Speed - No Load (RPM): 0 – 2,000, Reversible: Yes, Volts: 12, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 6.5, Tool Weight (lbs.): 1.9 Tool only; battery sold separately Powered by a 12V LITHIUM-ION battery (not included) Special impact mechanism for up to 75% faster driving speed Built-in LED worklight Battery fuel gauge

The Milwaukee M12™ 3/8in. impact wrench delivers power and convenience in a compact lightweight design. Features an easy socket insertion/release and utilizes a 3/8in. anvil with friction ring retention. Cordless: Yes, Max. Torque (ft.-lbs.): 83.3, Impacts Per Minute (IPM): 0-3,000, Drive (in.): 3/8, Speed - No Load (RPM): 0 – 2,200, Reversible: Yes, Volts: 12, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 6.5, Tool Weight (lbs.): 2.3 Tool only; battery sold separately Built-in LED worklight Battery fuel gauge

The Milwaukee M18™ Cordless Compact Impact Wrench delivers 2200 RPM and a category-leading 1400 in.-lbs. of torque. Additionally, the driver offers 0-3200 IPM, providing more impacts for increased productivity. A 1/4in. hex quick-change chuck allows for easy bit changes while a variable speed trigger provides increased user control. Cordless: Yes, Max. Torque (ft.-lbs.): 116.7, Impacts Per Minute (IPM): 0-3,200, Drive (in.): 1/4, Speed - No Load (RPM): 0 – 2,200, Reversible: Yes, Volts: 18, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 5 3/4, Tool Weight (lbs.): 2.6 Tool only; battery sold separately Powered by an 18V LITHIUM-ION battery (not included) Milwaukee 4-pole frameless motor maximizes tool efficiency to increase run time Belt clip allows for easy portability Battery fuel gauge displays remaining run time Built-in LED light illuminates work surface

The 2-in-1 design of the AC/DC Wall and Vehicle Charger allows for M18™ Li-Ion batteries to be charged in a traditional wall outlet or vehicles 12V power port. Now get M18 batteries charged in 30 minutes anywhere on the jobsite. Compatible With: M18 Li-Ion, Battery Charging Time (hrs.): 30 min., Volts: 18

The Northern Industrial cobalt-coated drill bits are engineered to outlast standard bits. This set includes an extensive range of sizes for a variety of applications. Includes (qty.): 115, Case Included: Yes, Size: A - Z, fractions 1/16in. - 1/2in., numbers 1 - 60, Finish Type: Cobalt Precision-milled 118° point Metal drill index and storage box

The Milwaukee® M12™ Cordless Multitool is one of the most versatile jobsite tools. This 12V cordless oscillating tool is ideal for remodelers, flooring contractors, maintenance repair technicians, and electricians that tackle awkward applications on jobsites. It cuts grinds, sands and scrapes all in one tool. This multitool runs 5000 to 20,000 OPM and allows the user to match the speed to the application. Versatile tool can perform a variety of applications: flush or plunge cuts, removing grout or grinding thinset, sanding or scraping. The included universal adapter allows the M12 multitool to be compatible with most competitive accessories on the market today. SAVE MONEY by replacing or adding specific tools that work with the M12 Lithium-Ion battery and charger you already own. The Milwaukee M12 bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Milwaukee bare tool to your M12 cordless system today. Volts: 12, Battery Included: No, Rotations Per Minute: 5,000–20,000, Cordless: Yes Tool only; battery sold separately 12 speed settings for greater control Powerful motor produces 5000–20,000 OPM All metal gearcase for jobsite durability Metal interface with 8 cogs enables user to rotate accessories 360° for complete versatility Ergonomic handle with rubber overmolding for greater control Onboard fuel gauge displays remaining run time Accessory adapter is compatible with most common accessories Does not include case

The Milwaukee® M12™ Cordless 3/8in. Hammer Drill Driver is a sub-compact hammer drill driver. At only 7 5/8in. long and 2.4 lbs., it is one of the lightest and most compact hammer drill drivers on the market, making it ideal for contractors, maintenance technicians, and remodelers desiring maximum portability with the performance to get the job done. Delivers incredible power, speed, and durability, with 275 in.-lbs. of torque and 0-400/0-1500 RPM. The 2-speed metal gearbox and 3/8in. metal single-sleeve ratcheting chuck provide maximum durability and superior grip and bit retention. An onboard fuel gauge and built-in LED light provide even greater convenience to the user during prolonged use. SAVE MONEY by replacing or adding specific tools that work with the M12 Lithium-Ion battery and charger you already own. The Milwaukee M12 bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Milwaukee bare tool to your M12 cordless system today. Max. Torque (in.-lbs.): 275, Volts: 12, Speed - No Load (RPM): 0–400 / 0–1,500, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 7.6, Tool Weight (lbs.): 2.4 Tool only; battery sold separately Powerful motor delivers 275 in.-lbs. of torque Compact and lightweight 2-speed metal gearbox: 0–22,500 BPM; 0–400/0–1500 RPM 3/8in. metal single-sleeve ratcheting chuck On-board fuel gauge displays remaining run time Built-in LED light illuminates work surface

The Milwaukee M18 Cordless Right Angle Drill combines a 3.75in. total head length with an integrated electronic clutch to create the most compact 18V right angle drill driver in the industry. A 3/8in. single sleeve keyless chuck, extended multiposition trigger and up to 125 ft.-lbs. of torque provide versatility, ease of use and power that is unmatched. SAVE MONEY by replacing or adding specific tools that work with the M18 Lithium-Ion battery and charger you already own. The Milwaukee M18 bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Milwaukee bare tool to your M18 cordless system today. Max. Torque (in.-lbs.): 125, Volts: 18, Speed - No Load (RPM): 0–1,500, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: Yes, 11 + drill, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 11 1/4, Tool Weight (lbs.): 2 3/4 Compact drill has 3.75in.L head for working in tight spaces Delivers 125 in.-lbs. of torque 3/8in. single sleeve ratcheting chuck Variable speed, reversible; 0–1500 RPM 11+1 electronic clutch settings Built-in LED lights Extended multiposition handle

The Klutch™ Ultimate Car Polishing Kit features a powerful 11 Amp, 7in. polisher, plus all the accessories youll need to polish your vehicle to a dazzling shine. Variable speed motor gives you ultimate control and the 5/8in. spindle lets you change accessories quickly and easily. Speed (RPM): 600 - 3,000, Amps: 11, Variable Speed: Yes, Disc Diameter (in.): 7, Tool Length (in.): 18 1/8, Tool Weight (lbs.): 9, Case Included: Yes 5/8in. spindle with lock for quick changes Die-cast aluminum gear housing Hook-and-loop system accepts all standard 7in. polishing accessories

The Milwaukee M12 Screwdriver has the power to drive the majority of common small fasteners and the run time of full-day screw driving without recharging. The compact size allows the users to work in tight places for increased convenience. Features a hex chuck which allows one-handed bit changes. Lithium-ion battery drives over 100 screws on a single charge. Max. Torque (in.-lbs.): 150, Volts: 12, Speed - No Load (RPM): 0 - 500, Chuck Size (in.): 1/4, Clutch Settings: 14 + 1, Variable Speed: Yes, Battery Amp/Hour: 1.4, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 7, Tool Weight (lbs.): 2 Built-in LED light Metal gear housing 1/4in. hex chuck allows one-handed bit changes Built-in battery fuel gauge displays remaining run time 12V lithium-ion battery drives 130 3in. screws on one charge Overmold side and grip

The Advantek Workshop Drill Bit set offers 115 titanium-coated high speed drill bits along with 210 additional bits of the same quality — giving you all the replacement bits youll ever need in the most popular sizes. For use in either 3/8in. or 1/2in. drills to bore into steel, wood or plastic. Includes (qty.): 327, Material: High speed steel, Diameter (in.): 1/16 - 1/2, Case Included: Yes 29 fractional bits, 1/16in. through 1/2in. Number bits, #1 through #60 Letter bits, A through Z

Kit includes 3 popular hole cutters used for pipe installations. Material Type: Steel, Saw Size (in.): 2 1/8, 2 9/16, 3 5/8, Ice Hardened: Yes, Saw (qty.): 7 Cutters are: 2 1/8in., 2 9/16in., 3 5/8in.

Ingersoll Rands IQv Series cordless drill/driver is ideal for all drilling, boring, fastening and screwing applications. Max. Torque (in.-lbs.): 550, Volts: 14.4, Speed - No Load (RPM): 1,300, Chuck Size (in.): 1/2, Reversible: Yes, Battery Included: No, Charger Included: No 2-speed all-metal gear train for power and durability Industrial keyless ratcheting chuck 550 in.-lbs. ideal stall torque 0–360/1300 RPM Compatible with all 14.4V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately Model D550

The lightweight yet powerful CEL Multi2PRO 10.8V Cordless Oscillating Multi-Tool can make a difference in your home improvement projects, allowing you to effortlessly perform a variety of applications, including cutting drywall, pipe, wood, concrete, masonry and nails; sanding and grinding in confined areas; removing caulk, floor tile and glued-down carpet. Features soft start, variable speeds, LED worklight, battery level gauge and soft grip. Oscillates (deg.): 3.2°, Movement: Oscillates between 5,000 and 19,000/min., Volts: 10.8, Battery Type: Li-Ion, Battery Included: Yes, Charger Included: Yes, Blade Included: Yes, Blade Type: Semicircle saw blade, Wrench Included: No, Pieces (qty.): 10, Dimensions L x W x H (in.): 13 1/2 x 10 1/2 x 3 1/2 LED worklight illuminates workpiece Battery indicator Blade adapter allows you to use any blades you may already have from other Multi-tool suppliers Universal adapter allows use of accessories from other manufacturers

Utilizing a duel alternating tooth geometry and a thin wall construction, Milwaukees annular cutters cut up to 15% faster than the competition. The proprietary steel reduces breakage and extends the life of the bit. All Milwaukee annular cutters have a Weldon Shank, perfect for use with most small magnetic drill presses as well as large magnetic drill presses with correct arbor. Length (in.): 2, Shank Diameter (in.): 3/4, Works With: 2in. ejector pin 3/4in. shank diameter 2in. cutting depth 1 1/8in. dia. Thin-wall design for faster, more efficient cutting Proprietary steel and 3 hardness zones make the bit less susceptible to breakage Flute design lets chips fall freely from cutter Works with 2in. ejector pin (Item# M0477, sold separately)

Cobalt alloy-coated bits drill through the hardest materials like stainless steel while cutting faster and drilling cleaner. Cobalt coating lasts longer than HSS and titanium-coated bits. 1/2in. shank. Includes case. Includes (qty.): 12, Case Included: Yes, Size: 17/32in., 9/16in., 19/32in., 5/8in., 21/32in., 11/16in., 23/32in., 3/4in., 13/16in., 7/8in., 15/16in. and 1in., Finish Type: Cobalt alloy-coated

For use with JET milling/drilling machines Item#s 144553 and 144554. Works With: Jet Milling/Drilling Machines, Includes (qty.): 6, Case Included: No

Heavy-duty cast iron construction provides strength and durability while supporting your grinder on the 11in. x 10in. mounting surface. Height (in.): 31, Wrench Included: No, Case Included: No Variable hole pattern accommodates different-sized grinders Coolant reservoir and tool tray adjust up or down on column for easy access Wide-stance base gives you a stable grinder workstation

The Drill Doctor® DD500X is a professional-level drill bit sharpener that is ideal for sharpening a full range of bits, including split points and the 135° bits used in drilling hardened metals. Sharpens split-point bits and creates split-points from standard bits. U.S.A. Bit Sizes (SAE): 3/32 to 1/2, Angle Sharpening (deg.): 118, 135, Carbide-Tip Bits: Yes, High Speed Steel Bits: Yes, Masonry Bits: Yes, Split Point Bits: Yes, Titanium-coated Bits: Yes, Case Included: No Easy front-loading chuck Features Quick Change diamond sharpening wheel Simplified alignment and sharpening procedures E-Z Align System™ assures correct sharpening alignment Variable Alignment lets you adjust chisel and relief angles

The Milwaukee® M12™ Cordless Lithium-Ion Rotary Tool utilizes a powerful 12V motor and Milwaukees Redlithium™ battery technology to produce unmatched performance and increased run time. The size and versatility of this cordless rotary tool make it an indispensable tool for maintenance contractors, electricians, plumbers, remodelers and more. The tool runs from 5,000–32,000 RPM and is managed by a variable speed dial for fluid control. The collet is completely compatible with all 1/32in.–1/8in. shank accessories providing the user access to thousands of cutting, grinding, sanding and polishing solutions. Cordless: Yes, Volts: 12, Speed - No Load (RPM): 5,000 – 32,000, Bit Sizes: 1/32 – 1/8, Lights: No, Collet Diameter (in.): 1/8, Battery Included: Yes, Tool Length (in.): 9 1/2, Tool Weight (lbs.): 1 5/16, Charger Included: Yes, Case Included: Yes Powerful 28V motor delivers unmatched performance under load 1/8in. collet is compatible with all current rotary tool accessories Variable speed (5000–32,000) is up to 10% faster than the competition Compact and lightweight, only 9.5in. long and 1.3 lbs. Grinder style exhaust ports and protected front bearing deliver up to 10X the tool life

Ingersoll Rands IQv Series cordless impact wrench is ideal for automotive interior, engine service, autobody service and non-critical assembly applications. Cordless: Yes, Max. Torque (ft.-lbs.): 40, Impacts Per Minute (IPM): 2,500, Speed - No Load (RPM): 2,200, Volts: 7.2, Battery Included: No, Charger Included: No Lightweight, compact tool Ideal for automotive interior, engine service, autobody service and non-critical assembly applications 2200 RPM, 2500 BPM 40 ft.-lbs. torque Compatible with all 7.2V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately

Powerful Milwaukee motor with variable speed control. Heavy-duty Grip-Lok™ 2-sleeve chuck with all metal gear case and diaphragm. 10ft. 2-wire Quik-Lok® rubber cord for easy storage and field replacement. 360° locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 3/8, Speed (RPM): 2,500, Cord Length (ft.): 10, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes, Case Included: No

This powerful drill has the construction and performance to eliminate any other 1/2in. drill in its category. This heavy-duty Magnum® drill is built for industrial/construction applications. It features raw power with a Milwaukee built 8.0 Amp motor, 0-850 RPM. Use this tool to drill into wood, metal, plastics and composites. Amps: 8, Chuck Size (in.): 1/2, Speed (RPM): 850, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No Ergonomic tactile grip All-metal gear case and diaphragm 8ft. 3-wire rubber cord 360° locking side handle Ergonomic tactile grip and 2-finger trigger for user comfort and balance

This Milwaukee M18™ Cordless Impact Wrench delivers best-in-class fastening speed. Its compact size reduces fatigue without sacrificing power. 1/2in. anvil with pin detent offers quick and easy one-handed socket changes to increase productivity. Cordless: Yes, Max. Torque (ft.-lbs.): 183.3, Impacts Per Minute (IPM): 0-3,200, Drive (in.): 1/2, Speed - No Load (RPM): 0 – 2,200, Reversible: Yes, Volts: 18, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 5 3/4, Tool Weight (lbs.): 2.6 Tool only; battery sold separately Powered by 18V LITHIUM-ION battery (not included) Milwaukee 4-pole frameless motor for maximum efficiency and run time Built-in LED light illuminates work surface Heavy-duty die-cast aluminum gear housing

The Milwaukee M12™ Copper Tubing Cutter is specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. Cordless: Yes, Volts: 12, Inside Cutting Radius (in.): 3/8 to 1, Battery Included: No, Charger Included: No, Case Included: No Tool only; battery sold separately Powered by a 12V LITHIUM-ION battery (not included) 500 RPM motor cuts up to 10X faster than manual tools Built-in LED fuel gauge displays remaining battery power Automatically adjusts from 3/8in. to 1in. in diameter Water-resistant metal cutter head Built-in LED worklight Lightweight and compact

The Milwaukee M18™ cordless 1/2in. Hammerdrill/Driver not only delivers an industry-leading compact and ergonomic design, but is up to 20% faster in concrete than the competition. In addition, the 2602-20 is the only hammerdrill/driver in its class with an all-metal gear case, providing maximum durability for heavy duty applications. Max. Torque (in.-lbs.): 450, Volts: 18, Speed - No Load (RPM): 0 - 450 / 0 - 1,700, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 8 1/2, Tool Weight (lbs.): 3 1/2 Tool only; battery sold separately Powered by an 18V LITHIUM-ION battery (not included) 0-29,000 BPM Heavy-duty 2-speed metal gearbox Single-sleeve metal chuck Li-Ion batteries for extended run time Built-in LED worklight Compact 8 1/2in. length

The Makita 18V Cordless Reciprocating Saw is powered by a Makita-built variable speed motor that delivers 2900 strokes per minute, combined with a 1 1/8in. long stroke to provide faster cutting. Tool-less blade change system enables faster blade installation and removal for increased productivity. Compact, ergonomic design fits like a glove with even pressure and easy control. U.S.A. SAVE MONEY by replacing or adding specific tools that work with the Makita 18V LXT Lithium-Ion battery and charger you already own. The Makita 18V bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Makita bare tool to your 18V LXT cordless system today. Cordless: Yes, Volts: 18, Variable Speed: Yes, Stroke Length (in.): 1 1/8, Strokes Per Minute (SPM): 2,900, Tool Length (in.): 17 3/4, Tool Weight (lbs.): 7.9 (with battery), Battery Included: No, Charger Included: No, Case Included: No Tool only; battery and charger sold separately Cuts up to 5 1/8in. dia. pipe Cuts up to 10in. wood (with 12in. blade) Soft grip handle provides increased comfort on the job LXT lithium-ion battery and Rapid Optimum charger produces 430% total lifetime work with 3X more cycles

Ingersoll Rand IQv Series lithium ion batteries pack smart voltage into lightweight packages. Designed for use with IQv Series tools; choose the battery for your application. Compatible With: IQv Series Tools, Battery Amp/Hour: 2.4, Battery Type: Lithium, Volts: 14.4, Low Battery Indicator: Yes, Dimensions L x W x H (in.): 5 x 3 1/2 x 4 Unique on-battery digital display indicates charge level at all times IQv Grip twist-to-lock battery interface ensures snug battery-tool connection 2.4 Ah provides up to 30% higher capacity than Ni-Cd and other Lithium Ion batteries Designed for use with IQv Series tools; choose the battery for your application

Ingersoll Rands IQv Series cordless impact wrench is ideal for automotive interior, engine service, autobody service and non-critical assembly applications. Cordless: Yes, Max. Torque (ft.-lbs.): 40, Impacts Per Minute (IPM): 2,500, Speed - No Load (RPM): 2,200, Volts: 7.2, Battery Included: No, Charger Included: No Lightweight, compact tool Ideal for automotive interior, engine service, autobody service and non-critical assembly applications 2200 RPM, 2500 BPM 40 ft.-lbs. torque Compatible with all 7.2V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately

This powerful drill has the construction and performance you need to get the job done. Amps: 8, Chuck Size (in.): 1/2, Speed (RPM): 850, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes All metal gear case and diaphragm 360° positive lock side handle Two finger trigger Ball and roller bearings 3-wire cord

The Northern Industrial cobalt-coated drill bits are engineered to outlast standard bits. This set includes an extensive range of sizes for a variety of applications. Includes (qty.): 145, Case Included: Yes, Size: Letters A-Z, Numbers 1-60 (plus 30 replacement bits for 41-60), fractional sizes from 1/16in. to 1/2in., Finish Type: Cobalt Precision-milled 118° point Metal drill index and storage box

Ingersoll Rands IQv Series cordless cutoff tool is ideal for light-duty cutting jobs, including muffler work, bolt cutting, exhaust and sheet metal work. Volts: 14.4, Battery Included: No, Rotations Per Minute: 25,000 Free speed, HP: 0.35, Cordless: Yes Tool only; battery and charger sold separately Compatible with all 14.4V IQv batteries, including Ni-Cd and Lithium Ion

Lightweight, feature-filled stand is ideal for your 10in. miter saw, providing up to 108in. of material support. Wrench Included: No, Dust Bag Included: No, Dimensions L x W x H (in.): Variable length x 20 x 48 Up to 108in. of material support 500-lb. capacity on main stand Adjustable 10in. support Ts and aluminum quick-attach saw mounts Comfortable 34in. work height Fast and easy snap-pin set up 6in. wheels for easy mobility Durable powder-coat finish Model PM3900

Variable speed saw with powerful 6 Amp motor delivers a smooth and aggressive cut with a large 1 3/16in. stroke. It features an adjustable slide-out shoe for longer blade life. Plus, the blade can be inverted for near-flush cutting. Cordless: No, Amps: 6, Variable Speed: Yes, Stroke Length (in.): 1 3/16, Strokes Per Minute (SPM): 0 – 2,300, Case Included: Yes Tool-less blade change and adjustable slide-out shoe All ball and needle bearings Lock-off button prevents accidental starts Accepts standard 1/2in. shank blades Lightweight for operator comfort Blade can be inverted for near-flush cutting Double insulated Includes 3 blades

Powerful Milwaukee motor with variable speed control. Heavy-duty Grip-Lok™ single-sleeve chuck with all metal gear case and diaphragm. 8ft. 3-wire Quik-Lok® rubber cord for easy storage and field replacement. 360° locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 3/8, Speed (RPM): 1,200, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes, Case Included: No

The Milwaukee M18 FUEL™ 1/2in. Drill/Driver is a new breed of cordless tool. Utilizing the most advanced technologies in the world, FUEL delivers unrivaled performance in a compact structure. It is built for the most demanding professionals in the world. FUEL delivers up to 10X longer tool life, 25% more power and 50% more runtime. With up to 725 in.-lbs. of torque, the M18™ FUEL™ drill/driver is the most powerful drill in its class. Its new Powerstate™ brushless motor provides unmatched power and sustained torque to complete the toughest of applications. The Powerstate motor outperforms all leading competitors and delivers up to 10X longer motor life for maximum durability. Powered by the durable RedLithium™ battery pack (not included, sold separately), the M18 FUEL drill/driver delivers up to 50% more run time than the competition. This drill driver contains an advanced electronic system with Redlink Plus™ intelligence, which provides total system communication with overload protection. A contoured soft grip gives users the ultimate comfort during prolonged use. The drill driver comes with an all-metal ratcheting locking chuck for maximum grip, bit retention and durability. Tool features an LED light, and is compatible with RedLithium compact and XC battery packs (sold separately). SAVE MONEY by replacing or adding specific tools that work with the M18 RedLithium™ Lithium-Ion battery and charger you already own. The Milwaukee M18 bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Milwaukee bare tool to your M18 cordless system today. Max. Torque (in.-lbs.): 650 / 725, Volts: 18, Speed - No Load (RPM): 0 - 550 / 0 - 1,850, Chuck Size (in.): 1/2, Keyless Chuck: No, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 8, Tool Weight (lbs.): 3.4 Tool only; battery sold separately Powerstate™ brushless motor delivers up to 725 in.-lbs. of torque with maximum sustained torque to complete the toughest of applications RedLithium™ battery technology provides superior pack construction, electronics and performance to deliver more work per charge and more work over pack life (Note: battery not included, sold separately) RedLink Plus™ intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger Soft grip for extended use Built-in LED light illuminates work area Two-speed geartrain: 0–550 / 0–1850 RPM 1/2in. metal ratcheting locking chuck

The Milwaukee M18™ Compact Drill Driver has been built to withstand tough jobsite conditions. The tool balance, weight and grip have been optimized to reduce fatigue. Superior bit grip prevents frequent bit retightening and lost bits. This Drill/Driver is factory reconditioned to perform like new. NorthernTool.com offers reconditioned tools and equipment that are equal to the standards and quality of new products, yet give you the same features at considerable savings. This model is warranted for 30 days parts and labor; Service Protection Plan available. Max. Torque (in.-lbs.): 400, Volts: 18, Speed - No Load (RPM): 0 - 350 / 0 - 1400, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 7 3/4, Tool Weight (lbs.): 3.1 Tool only; battery sold separately 1/2in. ratcheting chuck with plastic sleeve 2-speed metal gearbox Built-in LED light illuminates work surfaces

The Milwaukee M18™ Cordless Jig Saw delivers accuracy, versatility and ease of use. The 5-position orbital setting offers more cutting versatility than any other cordless jig saw on the market. This allows the user to select the type of cut or speed specific to their application. Cordless: Yes, Volts: 18, Strokes Per Minute (SPM): 0 – 2,200, Total Orbital Settings: 5, Bevel Cuts: Yes, Stroke Length (in.): 1, Variable Speed: Yes, Trigger Lock: Yes, Dust Blower: Yes, Dust Cover: Yes, Blade Included: No, Wrench Included: No, Battery Included: No, Case Included: No Tool only; battery sold separately Powered by an 18V LITHIUM-ION battery (not included) Tool-free shoe bevel allows for quick and accurate shoe adjustments Quick-Lok™ blade clamp provides fast and easy blade change Over-molded grip with variable speed trigger Non-marring shoe

The Drill Doctor spade and twist bit sharpener is a versatile multifunction tool that can sharpen nearly every bit in your shop. It sharpens spade bits up to 1 1/2in. and twist drills up to 1/2in. in less than a minute. Utilizes a precision alignment system to produce consistent results, time after time. U.S.A. Bit Sizes (SAE): Spade: 1/4in.–1 1/2in; Twist: 3/32in.–1/2in., Angle Sharpening (deg.): 118, Carbide-Tip Bits: Yes, Cobalt Bits: Yes, High Speed Steel Bits: Yes, Masonry Bits: Yes, Split Point Bits: Yes, Titanium-coated Bits: Yes, Case Included: No Sharpens both twist and spade bits in under a minute Sharpens spade bits from 1/4in.–1 1/2in., including bits with or without spurs, screw points, skew cutters and small spear point bit Sharpens twist drills from 3/32in.–1/2in. to a standard 118° point Sharpens high speed steel, titanium-coated, masonry and cobalt twist drill bits Sharpening modules feature precision alignment systems to ensure ease of use and repeatable results Uses replaceable diamond grinding wheel to sharpen twist bits Uses cool-running profiled vitrified wheel to sharpen spade bits Includes quick-start guide and instructional DVD

This drill boasts a 4.9 Amp motor for excellent performance, coupled with double gear reduction for extra power. It features a low 79db decibel rating for quieter operation. Amps: 4.9, Chuck Size (in.): 3/8, Speed (RPM): 2,500, Side Handle: No, Keyless Chuck: No, Variable Speed: Yes, Case Included: No Reversible Well balanced, weighs only 3.1 pounds In-line handle for better control Lock-on button Ball and needle bearing construction Belt clip Model 6407 U.S.A. Standard Equipment Chuck key

For use with JET milling/drilling machines Item#s 144553 and 144554. Works With: Jet Milling/Drilling Machines, Includes (qty.): 52 pc.; 6 - T-slot nuts, 6 - Flange nuts, 4 - Coupling nuts, 6 - Step blocks, 6 - Step clamps, 24-Studs, 4 each (3, 4, 5, 6, 7 & 8in. lengths), Case Included: Yes

The Milwaukee M18™ High Performance Drill/Driver delivers revolutionary power, run time and ergonomics. The new Milwaukee 4-Pole Frameless Motor generates a best-in-class 650 in.-lbs. of torque to meet the application rigors of the jobsite. Max. Torque (in.-lbs.): 650, Volts: 18, Speed - No Load (RPM): 0 - 450 / 0 - 1,800, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: 24, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 9.25, Tool Weight (lbs.): 3.8 Tool only; battery sold separately Powered by a 18V XC high-capacity LITHIUM-ION battery (not included) Easy-to-use 1/2in. single-sleeve ratcheting metal chuck with carbide jaws for maximum grip Built-in LED light illuminates work surface

The Milwaukee M12™ Cordless Lithium-Ion Multitool is one of the most versatile jobsite tools. This 12V cordless oscillating tool is ideal for remodelers, flooring contractors, maintenance repair technicians and electricians that tackle awkward applications on jobsites. The M12 Cordless multitool runs 5000 to 20,000 OPM and allows the user to match the speed to the application. The 12V Oscillating Tool has the versatility to perform a variety of applications: flush or plunge cuts, removing grout or grinding thinset, sanding or scraping. In addition, the M12 Red Lithium™ battery provides additional run time for the user. The universal adaptor allows the M12 cordless multitool to be compatible with most competitive accessories on the market today. Volts: 12, Battery Included: Yes, Rotations Per Minute: 5,000 – 20,000, Cordless: Yes Versatile tool cuts, grinds, sands and scrapes Variable speed dial: 12 settings from 5000 to 20,000 OPM Performs Durable all-metal gearcase Universal adapter is compatible with most competitive accessories

Single V18™ Lithium-Ion battery for use with all Milwaukee® 18V cordless tools (excludes Milwaukee Models 1108, 3108, 5364 and 6516). Weighs 24% less than 18V Ni-Cd batteries. Made with the highest quality cells, providing ultimate performance and long life. Charge with Lithium-Ion/Ni-Cd charger, Item# 332818 (sold separately). Compatible With: Milwaukee 18v Cordless Tools, Battery Type: Lithium Ion, Volts: 18, Low Battery Indicator: Yes, Dimensions L x W x H (in.): 4 x 7 x 7 5/16

The Milwaukee® M18 Red Lithium XC High Capacity LITHIUM-ION Battery pack offers increased run-time with 40% less weight than an 18V NiCd battery. Compatible With: Certain Milwaukee Cordless Tools, Battery Amp/Hour: 2.8, Battery Type: Lithium Ion, Volts: 18, Thermal Protector: Yes, Low Battery Indicator: Yes, Dimensions L x W x H (in.): 3 x 6 x 7 1/2 Internal sensors indicate the batterys age and the number of times it has been charged Built-in fuel gauge shows remaining charge on battery

The Klutch™ 19.2V Drill/Driver incorporates a die-cast magnesium gear housing for the ideal combination of light weight and strength. You get a more powerful motor with incredible torque output for your toughest jobs. Max. Torque (in.-lbs.): 300, Volts: 19.2, Speed - No Load (RPM): 0 – 1,300, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: 23 + 1, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 1.0, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 12, Tool Weight (lbs.): 5 Two variable speed ranges: 0–350 RPM; 0–1300 RPM 1/2in. Jacobs® keyless chuck Onboard bit storage Battery charge level indicator Ni-Cd battery

Ingersoll Rands IQv Series cordless impact wrench is ideal for general automotive and service work and production fastening. Cordless: Yes, Drive (in.): 1/4, Speed - No Load (RPM): 0 – 2,200 RPM / 3,000 BPM, Battery Included: No, Charger Included: No, Case Included: No Rugged composite housing with metal subframe; all-metal hammercase and housing ring for added durability Compatible with all 14.4V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately

Kit includes 11 cryogenically hardened hole saws in commonly used sizes. U.S.A. Bi-Metal: Yes, Saw Size (in.): 3/4in., 7/8in., 1in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in. 2 1/8in., 2 1/4in., 2 1/2in., Tooth Style: Optimized tooth form for up to 2 times faster cutting, Ice Hardened: Yes, Off Set Slots: Wide, angled & offset slots for easy plug access, Saw (qty.): 15 Bi-metal construction with 8% cobalt for increased wear resistance

The versatile HTC PortAMate™ miter saw stand puts you on top of the job and will have you cutting like a pro every time. Features include wide stance, quick-mount attachments, on-board power strip, durable 8in. wheels, loose material/cup holders and more. Its not a fancy sawhorse, its just one of the best portable saw stands youll have in your workshop. Dust Bag Included: No, Dimensions L x W x H (in.): 57 3/4 x 25 1/4 x 35 1/2 116in. (2.9m) of overall support Durable powder-coat finish Fast and easy snap-pin setup Quick-Mount machine attachments let you use compact benchtop tools like planers, band saws, scroll saws and miter saws interchangeably Roller supports with flip stops Convenient loose material/cup holders (2) 8in. wheels for sturdy portability 3-outlet power center Flip-down material supports Saw not included

This sturdy steel folding stand is designed for use with the Husqvarna Super Tilematic® TS 250 XL3 and TS 250X3 tile saws. U.S.A.

Ingersoll Rands IQv Series cordless straight die grinder offers performance and portability that are ideal for light-duty grinding applications. Speed (RPM): 27,500, HP: .35 .35 HP motor delivers power that exceeds most air die grinders Advanced gearing with same head and collet as Ingersoll Rand air die grinders Variable-speed motor control with safety lock 27,500 RPM free speed Compatible with all 14.4V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately Model GS25

The Milwaukee® M12™ Cordless Palm Nailer Kit provides a portable solution to professional nailing applications without the hassle of an air compressor or hose. The compact size takes this tool places unreachable by a tradition nail gun, while the powerful impacting mechanism handles the most difficult of tasks. The M12 palm nailer also features an onboard fuel gauge, LED worklight, and a convenient hand strap to ensure the highest level of safety and productivity for the user. Cordless: Yes, Volts: 12, Driving Angle (deg): 90, Tool Length (in.): 7.5, Tool Weight (lbs.): 3.4, Charger Included: Yes, Case Included: Yes, bag, Battery Included: Yes 6D–16D magnetic collet securely holds framing nails for one-handed use All metal gear housing handles tough jobsite conditions Palm style ergonomics delivers superior comfort and control Powerful mechanism delivers 2.2 ft.-lbs. of blow energy LED light illuminates work surface Battery is compatible with over 25 M12 tools Delivers 2700 BPM Drives 16D nail in under 2 seconds Drives up to 100 16D nails per charge Drives up to 200 strap nails per charge

This heavy duty Magnum® drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, and a Quik-Lok® cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites. Amps: 5.5, Chuck Size (in.): 1/2, Speed (RPM): 850, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No Trigger speed control with reverse Magnum system gives you the power you need Model 0234-6

The 2611 Hammerdrill/driver delivers revolutionary power, run time and ergonomics. The Milwaukee 4-pole frameless motor generates a best-in-class 650 in.-lbs. of torque to meet the application rigors of the jobsite. The 2611 incorporates an easy to use 1/2in. single-sleeve ratcheting metal chuck with carbide jaws for maximum grip. Max. Torque (in.-lbs.): 650, Volts: 18, Speed - No Load (RPM): 0 - 450, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 9 1/4, Tool Weight (lbs.): 5.3 (w/battery) Tool only; battery sold separately 1/2in. single-sleeve ratcheting metal chuck with carbide jaws 0-28,000 BPM Built-in LED light illuminates work surfaces

The Milwaukee M12™ Cordless PVC Shear utilizes a super-sharp stainless steel blade for burr-free cuts, slicing through 2in. PVC in as fast as 3 seconds. An offset blade easily cuts PVC mounted to a stud or close to a wall. Cordless: Yes, Volts: 12, Battery Included: No, Charger Included: No, Case Included: No Tool only; battery sold separately Powered by a 12V LITHIUM-ION battery (not included) 1900 in.-lbs. torque Quick-return blade increases productivity All-metal planetary drive delivers over 200 cuts per charge Impact-, water- and rust-resistant aluminum jaw Variable speed trigger On-board fuel gauge displays remaining run time

The Drill Doctor® DD750X is a professional-level drill bit sharpener that is ideal for sharpening a full range of bits, including split points and the 135° bits used in drilling hardened metals. Sharpens split-point bits and creates split-points from standard bits. The included large chuck sharpens 3/4in. bits. U.S.A. Bit Sizes (SAE): 3/32 to 3/4, Angle Sharpening (deg.): 115 to 140, Carbide-Tip Bits: Yes, High Speed Steel Bits: Yes, Masonry Bits: Yes, Split Point Bits: Yes, Titanium-coated Bits: Yes, Case Included: Yes Has the flexibility required to sharpen the largest range of drill or broken bits, including HHS, carbide, cobalt-coated, titanium-coated, split points and masonry bits Easy front-loading chuck Permanent magnet motor produces consistent power, regardless of speed or load Adjustable Material Take-Off (MTO) touches up dull bits or deep grinds damaged bits E-Z Align System assures correct sharpening alignment Variable Alignment lets you adjust chisel and relief angles Cast metal sharpening port for precision and durability

Wheel Diameter (in.): 14, Amps: 14 1/2, Speed - No Load (RPM): 3,800, Handle: Arm, Vise: Tool-free adjusting, Arbor Size (in.): 1, Wheel Included: No 7ft. electrical cord Rated input power 1600 Watts 110 Volt, 60 Hz Uses 14in. blade, not included Not related to WELBILT® products of Enodis companies

The Milwaukee 3/8in. close quarter angle drill provides a unique chuck angle that allows user to get into tight areas and still provide pressure from behind the chuck. Its large paddle trigger and textured grip area provides comfort and control in all positions. Amps: 3.5, Chuck Size (in.): 3/8, Speed (RPM): 0 – 1,300, Cord Length (ft.): 8, Keyless Chuck: No 3.5 Amp 120V motor 0–1300 RPM no-load speed Forward/reverse lever 3/8in. keyed chuck Angled chuck for reaching close quarters 8-ft. cord Angled cord exit keeps cord out of work area Double insulated Metal framed geartrain for longer gear life Large paddle trigger Textured palm grip Only 3 7/8in. from chuck to back of drill

Ingersoll Rands IQv Series cordless right angle die grinder offers performance and portability that make it ideal for light-duty grinding applications Speed (RPM): 25,000, HP: .35 .35 HP motor delivers power that exceeds most air die grinders Advanced gearing with same angle head and collet as Ingersoll Rand air die grinders Variable-speed motor control with safety lock 20,000 RPM free speed Compatible with all 14.4V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately

The Benchtop Belt/Disc Sander is ideal for grinding, sanding, finishing, polishing, deburring and contouring all types of material, including metal, plastic, wood and composites in either horizontal or vertical positions. HP: 1/2, Speed (RPM): 2,200, Amps: 3, Disc Diameter (in.): 6, Belt Size (in. x in.): 36L x 4W, Belt Speed (ft./min.): 1,318, Sanding Surface (in.x in.): 7 1/2 x 5, Noise Level (dB): 82, Tool Length (in.): 19.68, Tool Weight (lbs.): 37 1/2, Case Included: No, Dust Bag Included: No Work table angles for beveled sanding 0°, 15°, 30° and 45° 80-grit belt 80-grit disc The actual color of this item may vary from what is shown; it may be black/red or all black

This Makita Lithium-ion impact driver delivers powerful performance in a package that is only 6 1/in. long. Cordless: Yes, Max. Torque (ft.-lbs.): 800, Impacts Per Minute (IPM): 0-3,000, Drive (in.): 1/4, Speed - No Load (RPM): 0 – 2,400, Reversible: Yes, Volts: 10.8, Battery Included: Yes, (2) Lithium-ion, Charger Included: Yes, 50 minute, Case Included: Yes, heavy duty aluminum, Tool Length (in.): 6 1/8, Tool Weight (lbs.): 2 Variable speed/reversible impact driver provides 800 in.-lbs. of torque and 2400 RPM Integrated LED light Includes two 10.8V Lithium-ion batteries that provide longer run time and less self-discharge Compact design — only 6 1/8in.L Includes 50-minute battery charger and heavy-duty aluminum case

The Northern Industrial 18V cordless 4 1/2in. angle grinder lets you grind in any location without having to plug in a power cord. Wheel Diameter (in.): 4 1/2, Speed (RPM): 6,500, Spindle Lock: Yes, Side Handle: Yes, Wheel Included: Yes, Case Included: Yes Adjustable guard 2-position left/right auxiliary handle for control Rubber-coated handle for a secure grip Spindle lock Includes two 18V Ni-MH batteries, 1.5-hour fast charger.

Ingersoll Rand IQv Series lithium ion batteries pack smart voltage into lightweight packages. Designed for use with IQv Series tools; choose the battery for your application. Compatible With: IQv Series Tools, Battery Amp/Hour: 2.4, Battery Type: Lithium Ion, Volts: 19.2, Low Battery Indicator: Yes, Dimensions L x W x H (in.): 5 x 3 1/2 x 4 Unique on-battery digital display indicates charge level at all times IQv Grip twist-to-lock battery interface ensures snug battery-tool connection 2.4 Ah provides up to 30% higher capacity than Ni-Cd and other Lithium Ion batteries Designed for use with IQv Series tools; choose the battery for your application

This lightweight Bosch 7 1/4in. circular saw delivers 15 Amps of power and a left blade design for the clearest line of sight while cutting. Anti-snag lower guard lets you make cuts without having to advance the guard, even while making bevel cuts. Cordless: No, Blade Diameter (in.): 7 1/4, Amps: 15, Speed - No Load (RPM): 6200, Bevel Capacity (deg): 56°, Blade Location: Left side, Blade Included: Yes Lightweight design minimizes user fatigue Left blade design for best line of sight Anti-snag lower guard lets user make cuts without having to advance guard Includes 24T carbide blade

Ingersoll Rands IQv Series cordless impact wrench is ideal for general automotive and service work and production fastening. Cordless: Yes, Drive (in.): 3/8, Speed - No Load (RPM): 0 – 2,200 RPM / 3,000 BPM, Volts: 14.4, Battery Included: No, Charger Included: No, Case Included: No Rugged composite housing with metal subframe; all-metal hammercase and housing ring for added durability Compatible with all 14.4V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately

Ingersoll Rands IQv Series cordless impact wrench is ideal for general automotive and service work and production fastening. Cordless: Yes, Drive (in.): 1/2, Speed - No Load (RPM): 0 – 2200 RPM, 3000 BPM, Volts: 14.4, Battery Included: No, Charger Included: No Rugged composite housing with metal subframe; all-metal hammercase and housing ring for added durability Compatible with all 14.4V IQv batteries, including Ni-Cd and Lithium Ion Battery sold separately

You get 115 high speed steel drill bits in sizes 1/16in. - 1/2in. by 64ths, plus sizes 1-60 and A-Z. Huot index box. U.S.A. Includes (qty.): 115, Diameter (in.): 1/16 - 1/2 by 64ths, Case Included: Yes

The Makita-built motor in this Drill/Driver delivers 250 in.-lbs. of torque while the 2-speed design covers a wide range of drilling and driving applications. Ergonomic shape fits like a glove with even pressure and easy control, and the soft-grip handle provides increased comfort on the job. The ML120 Flashlight runs up to 2 hours per single charge. Max. Torque (in.-lbs.): 250, Volts: 12, Speed - No Load (RPM): 0 - 400 / 0 - 1,300, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 1.3, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 7 9/16, Tool Weight (lbs.): 3.3 3/8in. keyless chuck 16 torque settings plus drill mode

The Milwaukee® M12™ Cordless Multitool is one of the most versatile jobsite tools. This 12V cordless oscillating tool is ideal for remodelers, flooring contractors, maintenance repair technicians, and electricians that tackle awkward applications on jobsites. It cuts grinds, sands and scrapes all in one tool. This multitool runs 5000 to 20,000 OPM and allows the user to match the speed to the application. Versatile tool can perform a variety of applications: flush or plunge cuts, removing grout or grinding thinset, sanding or scraping. The included universal adapter allows the M12 multitool to be compatible with most competitive accessories on the market today. Volts: 12, Battery Included: Yes (2), Rotations Per Minute: 5,000–20,000, Cordless: Yes 12 speed settings for greater control Powerful motor produces 5000–20,000 OPM All metal gearcase for jobsite durability Metal interface with 8 cogs enables user to rotate accessories 360° for complete versatility Ergonomic handle with rubber overmolding for greater control Onboard fuel gauge displays remaining run time Accessory adapter is compatible with most common accessories Includes 2 M12 batteries, charger and contractor bag

This jamb saw from QEP helps you make your tile and doors work together. Cuts full inside corners in molding up to 1/2&Quot; thick. Common Usage: Helps to make tile and doors work together, Speed - No Load (RPM): 8,000, Cutting Thickness (in.): 1/2, Blade Diameter (in.): 6 9.5 Amps Adjustable cutting depth from flush to 1 1/16in. Can undercut doors as thick as 1 3/4in. without removal Includes 6 3/16in.dia. 36-tooth carbide tip blade and masonry blade

The Milwaukee M12 Drill/Driver has the power to drive the majority of common small fasteners, and the run time of full day screw driving without recharging. The compact size allows the users to work in tight places for increased convenience. Max. Torque (in.-lbs.): 250, Volts: 12, Speed - No Load (RPM): 0 - 400 / 0 - 1,500, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Battery Amp/Hour: 1.4, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 7 3/8, Tool Weight (lbs.): 2.5 Heavy-duty 2-speed metal gearbox Single-sleeve metal chuck Li-Ion batteries for extended run time Built-in LED worklight Battery fuel gauge

The Milwaukee M18 FUEL™ 1/2in. Hammer Drill is a new breed of cordless tool. Utilizing the most advanced technologies in the world, FUEL delivers unrivaled performance in a compact structure. It is built for the most demanding professionals in the world. FUEL delivers up to 10X longer tool life, 25% more power and 50% more runtime. With up to 725 in.-lbs. of torque, the M18™ FUEL™ hammer drill is the most powerful drill in its class. Its new Powerstate™ brushless motor provides unmatched power and sustained torque to complete the toughest of applications. The Powerstate motor outperforms all leading competitors and delivers up to 10X longer motor life for maximum durability. Powered by the durable RedLithium™ battery pack (not included, sold separately), the M18 FUEL hammer drill delivers up to 50% more run time than the competition. This hammer drill contains an advanced electronic system with Redlink Plus™ intelligence, which provides total system communication with overload protection. A contoured soft grip gives users the ultimate comfort during prolonged use. The hammer drill comes with an all-metal ratcheting locking chuck for maximum grip, bit retention and durability. Tool features an LED light, and is compatible with RedLithium compact and XC battery packs (sold separately). SAVE MONEY by replacing or adding specific tools that work with the M18 RedLithium™ Lithium-Ion battery and charger you already own. The Milwaukee M18 bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Milwaukee bare tool to your M18 cordless system today. Max. Torque (in.-lbs.): 650 / 725, Volts: 18, Speed - No Load (RPM): 0 - 550 / 0 - 1,850, Chuck Size (in.): 1/2, Keyless Chuck: No, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 8.1, Tool Weight (lbs.): 3.5 Tool only; battery sold separately Powerstate™ brushless motor delivers up to 725 in.-lbs. of torque with maximum sustained torque to complete the toughest of applications RedLithium™ battery technology provides superior pack construction, electronics and performance to deliver more work per charge and more work over pack life (Note: battery not included, sold separately) RedLink Plus™ intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger Soft grip for extended use Built-in LED light illuminates work area Two-speed geartrain: 0–550 / 0–1850 RPM Hammer mode: 31,450 BPM 1/2in. metal ratcheting locking chuck

The new Milwaukee Orbital Sawzall® Reciprocating Saw offers the speed, durability, ergonomics and power to handle even the most extreme cutting applications. U.S.A. Volts: 120 AC, Amps: 12, Variable Speed: Yes, Stroke Length (in.): 1 1/8, Strokes Per Minute (SPM): 0 – 2,800, Tool Length (in.): 18 3/4, Tool Weight (lbs.): 8.8, Case Included: Yes Gear-protecting clutch QuikLok™ blade clamp

The 1/4in. hex quick-change chuck allows for easy bit changes while a variable-speed trigger provides increased user control. The lightweight and compact design minimizes user fatigue. This Impact Driver is factory reconditioned to perform like new. NorthernTool.com offers reconditioned tools and equipment that are equal to the standards and quality of new products, yet give you the same features at considerable savings. This model is warranted for 30 days parts and labor; Service Protection Plan available. Cordless: Yes, Max. Torque (ft.-lbs.): 116, Impacts Per Minute (IPM): 3,200, Drive (in.): 1/4, Speed - No Load (RPM): 2,200, Volts: 18, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 5 3/4, Tool Weight (lbs.): 2.6 Heavy-duty motor delivers 116 ft.-lbs. of torque Variable speed trigger; 0–2200/0–3200 IPM 1/4in. hex quick-change chuck Built-in LED light Lightweight, compact design

The Klutch™ 24V 1/2in. Impact Wrench delivers exceptional cordless power with high torque output to loosen and tighten nuts and bolts for auto repair, equipment maintenance and construction projects. Cordless: Yes, Max. Torque (ft.-lbs.): 210, Impacts Per Minute (IPM): 0 - 4,600, Drive (in.): 1/2, Speed - No Load (RPM): 0–2,300, Reversible: Yes, Amps: 28 - 32, Volts: 24, Battery Included: Yes, Charger Included: Yes, Case Included: Yes Reversible 1/2in. drive size Delivers 210 ft.-lbs. of torque Balanced design Ergonomic soft grip handle for control and comfort Includes two 24V batteries and fast charger Replacement battery is Northern item number 16595

The Milwaukee® M12™ Cordless 3/8in. Hammer Drill Driver is a sub-compact hammer drill driver. At only 7 5/8in. long and 2.8 lbs., it is one of the lightest and most compact hammer drill drivers on the market, making it ideal for contractors, maintenance technicians, and remodelers desiring maximum portability with the performance to get the job done. Delivers incredible power, speed, and durability, with 275 in.-lbs. of torque and 0-400/0-1500 RPM. The 2-speed metal gearbox and 3/8in. metal single-sleeve ratcheting chuck provide maximum durability and superior grip and bit retention. An on-board fuel gauge and built-in LED light provide even greater convenience to the user during prolonged use. Max. Torque (in.-lbs.): 275, Volts: 12, Speed - No Load (RPM): 0–400 / 0–1,500, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: Yes, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 1.5, Battery Included: Yes (2), Charger Included: Yes, Case Included: Yes, Tool Length (in.): 7.6, Tool Weight (lbs.): 2.8 Powerful motor delivers 275 in.-lbs. of torque Compact and lightweight 2-speed metal gearbox: 0–22,500 BPM; 0–400/0–1500 RPM 3/8in. metal single-sleeve ratcheting chuck On-board fuel gauge displays remaining run time Built-in LED light illuminates work surface

Milwaukee 3-bay universal charger charges all Milwaukee slide-on Ni-Cd batteries and V18/V28 Li-ion batteries. Durable construction to withstand tough jobsite conditions. Built-in cord wrap acts as a shock absorber. Compatible With: Milwaukee 12-18v Ni-Cd/18-28v Lithium Ion Batteries, Battery Charging Time (hrs.): 1, Battery Type: Lithium-Ion/NiCd, Volts: 12-18, LED Indicators: Yes, Low Battery Indicator: Yes, Pass Through Plug: Yes, Portable: Yes, Charges Multiple Batteries (qty.): 3 High-visibility LED indicates charge status Impact-resistant base Built-in cord wrap

Milwaukees circular saw features a patented adjustable main handle that provides users with maximum control and comfort. The handle position can be moved for the best ergonomic grip. Both front and rear handles have cushioned grips. Blade is mounted on the left for superior visibility to the cut line. Cordless: No, Blade Diameter (in.): 7 1/4, Amps: 15, HP: 3.25, Speed - No Load (RPM): 5,800, Bevel Capacity (deg): 50, Blade Location: Left, Spindle Lock: Yes, Blade Included: Yes, Wrench Included: Yes, Case Included: Yes Powerful double-insulated motor cuts through materials with ease Exclusive 8-position Tilt-Lok™ handle adjusts to the cutting application Lightest weight 3.25 max HP saw available Easy access depth and bevel adjustments Full 50° bevel capacity for cutting extreme angles Top-mounted spindle lock for easy blade changes Durable aircraft aluminum shoe resists bending Clear line sighting

The Klutch™ Disc Sander rounds edges, smooths miter cuts and fine-sands woodworking projects with its 80-grit, 12in. diameter disc. HP: 1, Speed (RPM): 1,700, Amps: 6.4, Disc Diameter (in.): 12, Noise Level (dB): 82, Tool Weight (lbs.): 68, Case Included: No, Dust Bag Included: No Cast iron table tilts 0–45° Table includes a miter gauge Built-in 2in. dust port to attach a bag or vacuum system (not included) The actual color of this item may vary from what is shown; it may be black/red or all black

Powerful Milwaukee motor with variable speed control. Heavy-duty keyed chuck with all metal gear case and diaphragm. 8ft. 3-wire Quik-Lok® rubber cord for easy storage and field replacement. 360° locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 3/8, Speed (RPM): 1,200, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes

The Woodward-Fab throatless rotary shear cuts steel up to 1/8in. thick into any shape easily. Cutting Depth (in.): 1/8 Heavy-duty forged steel frame with ratcheting head Includes adjustable work stop and straight cut fence

The M18™ cordless 1/2in. high-torque impact wrench provides industry-leading power in a compact size. Built with a Milwaukee® 4-pole motor and a powerful impact mechanism, the 2662-20 delivers 650 in.-lbs. of torque. The 1/2in. anvil with detent pin achieves superior socket retention. Cordless: Yes, Max. Torque (ft.-lbs.): 450, Impacts Per Minute (IPM): 0 – 2,200, Drive (in.): 1/2, Speed - No Load (RPM): 0 – 1,900, Reversible: Yes, Volts: 18, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 8 7/8, Tool Weight (lbs.): 6.7 (w/battery) Tool only; battery sold separately 1/2in. anvil w/pin detent 4-pole frameless motor for maximum run time

The M18™ cordless 1/2in. high-torque impact wrench provides industry-leading power in a compact size. Built with a Milwaukee® 4-pole motor and a powerful impact mechanism, the 2663-20 delivers 450 ft.-lbs. of torque. The 1/2in. anvil with friction ring provides quick and easy, one-handed socket changes. Cordless: Yes, Max. Torque (ft.-lbs.): 450, Impacts Per Minute (IPM): 0 – 2,200, Drive (in.): 1/2, Speed - No Load (RPM): 0 – 1,900, Reversible: Yes, Volts: 18, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 8 7/8, Tool Weight (lbs.): 6.7 (w/battery) Tool only; battery sold separately 1/2in. anvil w/friction ring 4-pole frameless motor for maximum run time

This 1/2in. drill boasts a hefty 6.5 Amp motor for continuous production work. Its industrial metal gear housing means this tool will last for many years to come. U.S.A. Amps: 6.5, Chuck Size (in.): 1/2, Speed (RPM): 550, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No Reversible Weighs only 4.8 pounds Lock-on button for long jobs Side handle can be attached to either side of tool Belt clip for portability Double insulated Model 6302H

Optional attachment for use with Darex V390 sharpener, Item# 3316390. Diamond wheel attachment can be interchanged without tools. U.S.A.

Replacement wheel used for splitting the point on HSS and cobalt drill bits when used with V390 Tool-Drill Sharpener, Item# 3316390. Sharpens approx. 2000 bits before needing replacement. Long-lasting, 180-grit wheel does not require dressing. U.S.A.

Premium dry-cutting diamond replacement blade for BX3 masonry saw, Item# 999605. 14in. diameter with 1in. arbor and .110in. width. Blade Use: Masonry, Blade Diameter (in.): 14, Arbor Size (in.): 1, Teeth (qty.): 16, Blade Speed (RPM): 5,095, Blades (qty.): 1

Kit includes 6 popular hole cutters used for pipe installations. Material Type: Steel, Saw Size (in.): 2 1/8in., 2 1/4in., 2 9/16in., 3in., 3 5/8in., 4 1/4in., Ice Hardened: Yes, Saw (qty.): 10

Kit includes 19 cryogenically hardened hole saws in sizes often used by electricians. U.S.A. Professional Series: Yes, Bi-Metal: Yes, Saw Size (in.): 3/4in., 7/8in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in., 2 1/4in., 2 1/2in., 2 5/8in., 3in., 3 5/8in., 4 1/8in., 4 3/4in., Tooth Style: Optimized tooth form for up to 2 times faster cutting, Ice Hardened: Yes, Off Set Slots: Wide, angled & offset slots for easy plug access, Saw (qty.): 19 Bi-metal construction with 8% cobalt for increased wear resistance

Powerful Milwaukee motor with variable speed control. Heavy-duty keyed chuck with all metal gear case and diaphragm. 8ft. 3-wire Quik-Lok® rubber cord for easy storage and field replacement. 360° locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 1/4, Speed (RPM): 2,500, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No

This Makita Fixed Base Spiral Saw illuminates your cutting edge with a built-in, shockproof, high output white LED light that never needs replacing for the life of the tool! Has a quiet yet powerful 4.8 Amp motor to conquer the most demanding trim jobs ultra-fast. A simple and efficient base lock system provides stability and speeds up trimming operations. Ergonomically designed slim 2 3/8in. body for comfort and control. Cordless: No, Amps: 4.8, Speed - No Load (RPM): 26,000, Cutting Thickness (in.): 1 5/8 Easy thumb roller adjustment for fine cutting Externally accessible carbon brushes Trimmer guide helps with non-piloted bits

Full range of spiral and multi-spline extractors for removing the toughest bolts and screws from 3/32in. to 1 5/16in., including metric sizes. Left-hand cobalt drill bits are designed to drill counterclockwise into screws and bolts to loosen them. Set includes 6 spiral screw extractors, 13 multi-spline screw extractors and 16 left-hand mechanics length cobalt drill bits in sizes 5/64in. to 1/2in. U.S.A. Extractor Material: Bi-Metal, Removal Of: Screws and Bolts, Compatible Tool: Drill, Extractor Type: Spiral and Multi Spine, Extractor (qty.): 35 - Assorted, Storage Case Included: Yes

The Milwaukee M12 cordless 2-tool combo kit includes the Screwdriver (2401-20) and the Hackzall™ Recip Saw (2420-20). Powered by lithium-ion, the M12 cordless system offers unmatched power, speed, and tool belt portability. This Combo Kit is factory reconditioned to perform like new. NorthernTool.com offers reconditioned tools and equipment that are equal to the standards and quality of new products, yet give you the same features at considerable savings. This model is warranted for 30 days parts and labor; Service Protection Plan available. Tools Included: Hackzall, sub compact driver,, Storage Case Included: Yes, Volts: 12, Battery Type: Li-Ion, Battery Included: Yes, Charger Included: Yes Hackzall® with variable speed motor at 0–3000 SPM, 1/2in. stroke length Quik-Lok® blade clamp Driver delivers 100 in.-lbs. of torque 0–500 RPM variable speed 1/4in. hex chuck allows one-handed bit changes

3.0Ah slide-on M28™ lithium-ion battery provides twice the run time of 18V Ni-Cd batteries, with no memory effect. Replacement battery for Milwaukee® 28V tools and worklights.

The M12 3/8in. impact wrench delivers power and convenience in a compact lightweight design. Features an easy socket insertion/ release and utilizes a 3/8in. anvil with friction ring retention. Cordless: Yes, Max. Torque (ft.-lbs.): 83.3, Impacts Per Minute (IPM): 3,000, Drive (in.): 3/8, Speed - No Load (RPM): 2,000, Reversible: Yes, Volts: 12, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 6.5, Tool Weight (lbs.): 2.3 Built-in LED worklight Battery fuel gauge

The M12 Copper Tubing Cutter is specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. A 12V Li-Ion battery and ultra-efficient gearing ensures over 200 cuts on a single charge. Cordless: Yes, Volts: 12, Inside Cutting Radius (in.): 3/8 to 1, Battery Included: Yes, Charger Included: Yes, Case Included: Yes 500 RPM motor cuts up to 10X faster than manual tools M12 Li-Ion battery gets more than 200 cuts per charge Built-in LED fuel gauge displays remaining battery power Automatically adjusts from 3/8in. to 1in. in diameter Water-resistant metal cutter head Built-in LED worklight Lightweight and compact

Powerful 12 AMP motor provides continuous operation and long 1 1/4in. stroke is ideal for faster cutting. Cordless: No, Amps: 12, Variable Speed: Yes, Stroke Length (in.): 1 1/4, Strokes Per Minute (SPM): 0 – 2,800, Tool Length (in.): 19 1/8, Case Included: Yes All ball and needle bearings for longer tool life Externally accessible brushes for easy maintenance

This powerful Milwaukee 12V Cordless 1/4in. hex impact driver delivers best in class performance with a specially designed impact mechanism for top fastening speed and longer run times with a powerful lithium-ion battery that is lightweight and compact. Cordless: Yes, Max. Torque (ft.-lbs.): 850, Impacts Per Minute (IPM): 0 – 2,450, Drive (in.): 1/4, Speed - No Load (RPM): 0 – 2,000, Volts: 12, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 6 1/2, Tool Weight (lbs.): 2.3 Special impact mechanism for up to 75% faster driving speed Li-Ion battery delivers up to 2X run time, longer life and fade-free power Built-in LED worklight, battery fuel gauge

Kit includes 18 cryogenically hardened hole saws in sizes often used by plumbers. U.S.A. Professional Series: Yes, Bi-Metal: Yes, Saw Size (in.): 3/4in., 7/8in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2 1/4in., 2 5/8in., 3in., 3 1/2in., 4 in., 4 1/4in., 4 1/2in., Tooth Style: Optimized tooth form for up to 2 times faster cutting, Ice Hardened: Yes, Off Set Slots: Wide, angled & offset slots for easy plug access, Saw (qty.): 18 Bi-metal construction with 8% cobalt for increased wear resistance

Powerful Milwaukee motor with variable speed control. Heavy-duty keyed chuck with all metal gear case and diaphragm. 8ft. 3-wire Quik-Lok® rubber cord for easy storage and field replacement. 360° locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 1/4, Speed (RPM): 4,000, Cord Length (ft.): 8, Side Handle: No, Keyless Chuck: No, Variable Speed: Yes, Case Included: No

This powerful drill has the construction and performance to eliminate any other 1/2in. drill in its category. This heavy-duty Magnum® drill is built for industrial/construction applications. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool to drill into wood, metal, plastics and composites. Amps: 8, Chuck Size (in.): 1/2, Speed (RPM): 850, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes 580 in.-lbs. max. torque All metal Grip-Lok™ single-sleeve chuck 8ft. 3-wire Quik-Lok® rubber cord Comfortable tactile grip and 2-finger trigger

This trimmer illuminates your cutting edge with a built-in, shockproof, high output white LED light that never needs replacing for the life of the tool! Has a quiet yet powerful 4.8 Amp motor to conquer the most demanding trim jobs ultra-fast. A simple and efficient base lock system provides stability and speeds up trimming operations. Ergonomically designed slim 2 3/8in. body for comfort and control. Cordless: No, Speed - No Load (RPM): 26,000, Cutting Thickness (in.): 1 5/8 Easy thumb roller adjustment for fine cutting Externally accessible carbon brushes Trimmer guide helps with non-piloted bits

If you have things that need cleaning, sharpening, buffing, removing rust, or removing burs from metal, then you need this JET 6in. Industrial Bench Grinder. Features heavy-duty construction with powerful, long-life motor for use all day, every day. It comes standard with fine and coarse vitrified grinding wheels, cast iron wheel guards and dust vents, and more. Wheel Diameter (in.): 6, Speed (RPM): 3,450, HP: 1/2, Wheel Included: Yes, 2, Dimensions L x W x H (in.): 18 x 8 1/2 x 10 1/2 1/2 HP, 115V motor 6in. x 3/4in., 36/60-grit wheels Totally enclosed, pre-lubricated ball bearings 1/2in. shaft diameter 1-pc. quick adjusting spark guards Adjustable tool rests Cast iron wheel guards and dust vents Large eye shields with quick adjustment Rubber mounts prevent movement UL listed

The swivel head design is designed with comfort in mind. With its variable speed, it handles a variety of jobs. It uses a three-blade cutter design to give consistent cuts in a variety of materials. Cordless: No, Amps: 4, Volts: 120, Cutting Speed (in. per min.): 180, Cutting Capacity Steel (gauge): 18, Cutting Capacity Stainless Steel (gauge): 20, Strokes Per Minute (SPM): 2,500, Head Swivel (deg.): 360 Cuts round, square and irregular holes Trigger speed control Aluminum gear case and diaphragm