U.S.A. Connector Type: 5-pole round trailer end

U.S.A. Connector Type: 6-pole round trailer end

8in. pieces of pre-cut trimmer line that is simply pushed into the trimmer head for quick and easy loading. Eliminates tangled spools and winding of the trimmer line in the wrong direction. U.S.A. Diameter (in.): .105, Length (ft.): 2/3, Includes (qty.): 50

This Nortrac® hydraulic breather cap includes 40 micron open cell foam to protect hydraulic tank from airborne contamination. Fitting Size (in.): 1/4 NPT, Filter Rating: 40 micron open cell foam, Material Type: Chromed steel Approximately 1.8in. dia. x 2.5in.L

The Aerating Fountain includes 6 interchangeable nozzles for 7 fountain patterns, including the Redwood, Linden, Spruce, Willow, Juniper, Sequoia and Birch. Draws 20 Amps @ 240 Volts. Requires only 26in. of water to operate. ETL approved to UL and CSA standards. U.S.A. Approximate Pond Size (acres): 2 1/2, Power Cord (ft.): 250, Volts: 240, HP: 5, Water Depth Required (in.): 26, Running Amps: 20, Starting Amps: 97, Patterns (qty.): 7, Pattern Design: Redwood, Spruce, Sequoia, Birch, Linden, Willow, Juniper, Pattern Size H x W (ft.): Varies, Power Cord (gauge): 8, Model: 5.1JF Provides water oxygen and agitation for a healthy pond 7 beautiful patterns: Redwood (26ft.H x 8ft.W tall geyser), Linden (20ft.H. x 35ft.W), Spruce (24ft.H x 15ft.W wide geyser), Willow (14ft.H x 36-ft.H V-shape), Juniper (10ft.H x 50-ft.W V-shape), Sequoia (21ft.H x 10-ft.W) and Birch (14ft. x 12ft. column, no nozzle) Includes float, 250-ft. power cord, three 50-ft. mooring ropes, rope weights, nozzles and control panel Unique water-deflecting nozzle design is clog-resistant Propeller technology for breathtaking patterns and high water flow Long-life top and bottom ball bearings Environmentally friendly oil-filled motor is sealed against leaks Flood oil lubricated to dissipate heat Highly efficient, with low power consumption Works well in salt water and other corrosive environments Stainless steel external motor, float and hardware components with zinc anode Requires minimal maintenance ETL listed to UL and CSA safety standards Ships in 4 boxes

NorthStar® Horizontal Log Splitters mighty 630cc Honda V-twin engine with 30in. cylinder splits logs up to 30in. long. Even splits forked oak stumps 2 ways. Hydraulic log lifter makes it fast and easy. Convenient staging table is designed for smaller logs. Adjustable hydraulic 4-way wedge delivers twice as many splits per stroke. Rust-resistant, baked-on glossy black finish ensure years of trouble free use. Plus, the large wheels and 2in. ball hitch make it easy to take this splitter anywhere. Log lift can be lowered out of the way for maximum power on forked logs. U.S.A. Ram Force (Tons): 42, Operation: Horizontal, Engine: Honda GX630 V-Twin Electric Start, Engine Displacement (cc): 630, Low Oil Shutdown: Yes, Cycle Time (sec.): 14, Automatic Cylinder Return: Yes, Cylinder: 6in. x 30, Pump: Barnes 28 GPM 2-stage, Max. PSI: 3,000, Oil Reservoir (gal.): 28, Log Cradle: Yes, Log Lift: Yes, Jack Stand: Yes, Ball Coupler (in.): 2, Tire Size: 205/75 x 15, 28in. wheels, Fenders: Yes, Pre-assembled: Yes, Dimensions L x W x H (in.): 122 x 76 1/4 x 52 2-stage pump allows the log splitter to achieve the same pressures as a single stage pump, while using less horsepower Horizontal-shaft engines can expect a lifetime that is up to five times longer than the lifetime of a vertical shaft engine Extra heavy-duty I-Beam construction Direct drive with flexible couplings 3000 PSI rated max. for control valve detent 660-lb. capacity log lift Log cradle centers the log on the wedge and prevents it from rolling off of the beam Prince tandem control valve 3000 PSI relief setting Split control: auto-return with pressure release detent to neutral Low oil shutdown and spark arrestor 205/75 x 15, 28in. O.D. wheels Rust-resistant, baked-on glossy black finish 2in. ball hitch with safety chains Comes with hydraulic fluid Battery not included Replacement parts are available through Northern Tool Parts Department 1-800-270-0810

This tire inspector is designed to find leaks in truck tires that are not mounted on a wheel. Application: Tire inspector Demountable hub system allows tires to be mounted and inflated with air quickly Heavy-duty tire testing machine easily locates sidewall and tread leaks and accommodates tire sizes from 15in. rim diameter to 24 1/2in. rim diameter Built with a heavy-duty tubular frame 72in.L x 51in.W x 43 1/2in.H

This Sunforce Products solar backup power system delivers up to 800 Watts of power, making it an ideal choice for powering up non-electrified cabins and cottages or storing emergency power. Common Usage: Standby power, Panel Type: Polycrystalline, Solar Panel Wattage: 80, Modified Sine Wave: No, True Sine Wave: Yes, Dimensions L x W (in.): 51 1/4 x 26 7/8, Thickness (in.): 3 1/2, Material Type: Polysilicon, Solar Panels Included (qty.): 10, Battery Included: No, Battery Type: 350 Ah battery recommended, Batteries (qty.): 0 included, Mounting Hardware Included: No 2500 Watt pure sine wave inverter for all types of appliances and sensitive electronics 50 Amp charge controller; controller is PWM and temperature compensating

This manual pup shop press from AmerEquip is great for general shop use with no requirements for production speed. Equipped with dual pistons. 10,000 PSI pump easily produces enough pressure to do the job. U.S.A. Continuous Force (Tons): 50, Working Pressure (PSI): 10,000, Dimensions L x W x H (in.): 48 x 42 x 78 All welded frame construction Sliding head for multiple work positions Overload press valve prevents press from being used beyond its rated capacity Glycerine-filled hydraulic gauge protects against shock load and measures US and metric tons of force 2in. dia. ram Winch with non-slip safety clutch and solid steel cable rollers Zinc-plated bed plates and support pins

Heavy-duty tire changer handles BIG truck tires! Features super duty spindle arm construction and powerful 4-jaw chuck. Handles steel and alloy rims up to 26in. and tire/wheels up to 63in. Recommended Use: Tire changer, Machine Type: Electric / hydraulic, Tire Type: Truck tires, Max. Rim Width: 31 1/2, Clamp Type: 4-jaw chuck, Volts: 208-230 Single phase, Drive System: Electric / hydraulic, Control Mechanism: Remote control, Dimensions L x W x H (in.): 96 x 48 x 42, Includes: Adjustable hydraulic pressure Super duty spindle arm construction Handles steel and alloy rims from 14in. up to 26in. Accommodates 63in. max. diameter tire/wheel Remote control pedestal for safe, easy operation Armor-plate disc bead breaking system Different voltages available on request

This air/hydraulic shop press from AmerEquip gives you quicker cycling times thanks to a combination of air and hydraulic pumps. U.S.A. Continuous Force (Tons): 50, Winch Included: Yes, Dimensions L x W x H (in.): 48 x 42 x 78 Pump requires 90 to 120 PSI air pressure to produce 10,000 PSI hydraulic pressure 4ft.L air line All-welded frame Sliding head for multiple work positions Hydraulic pump can be mounted on either side of the frame Glycerin-filled hydraulic gauge protects against shock load and measures applied force 2in. dia. low-profile punch

The Ingersoll Rand rotary screw air compressor features technology that allows it to operate for extended periods at temperatures much lower than those generated by a reciprocating compressor. Rotary screw air compressors are ideal for demanding industrial applications. Total Air System (TAS) compressor includes refrigerated dryer with integrated controls and dual, high-efficiency final filters. Warranty on the rotary compressor extends to 2 years with the use of appropriate start-up kit, Item# 305900 (sold separately). Max. PSI: 125, Volts: 230, HP: 7 1/2, Air Tank Size (gal.): 80, Tank Description: Horizontal, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 54 x 29 x 61 Compressor package comes standard with: ODP electric motor Air-cooled aftercooler to reduce discharge air temperatures Full voltage motor starter (mounted and wired) Auto start/stop control Low sound/full sheet metal enclosure Pre-filter 9000-hr. rated Ultra Plus coolant Oil filter and separator element ASME tank NEMA-1 electrical protection Refrigerated dryer with integrated controls Dual, high-efficiency final filters

The Ingersoll Rand rotary screw air compressor features technology that allows it to operate for extended periods at temperatures much lower than those generated by a reciprocating compressor. Rotary screw air compressors are ideal for demanding industrial applications. Total Air System (TAS) compressor includes refrigerated dryer with integrated controls and dual, high-efficiency final filters. Warranty on the rotary compressor extends to 2 years with the use of appropriate start-up kit, Item# 305900 (sold separately). Max. PSI: 125, Volts: 460, HP: 7 1/2, Air Tank Size (gal.): 80, Tank Description: Horizontal, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 54 x 29 x 61 Compressor package comes standard with: ODP electric motor Air-cooled aftercooler to reduce discharge air temperatures Full voltage motor starter (mounted and wired) Auto start/stop control Low sound/full sheet metal enclosure Pre-filter 9000-hr. rated Ultra Plus coolant Oil filter and separator element ASME tank NEMA-1 electrical protection Refrigerated dryer with integrated controls Dual, high-efficiency final filters

Telescoping tool has a 5-lb. capacity. Product Style: Retrieving magnet, Pulling Power (lbs.): 5

17-pc. SAE/metric hex key wrench set includes 9 SAE and 8 metric hex keys. Sets (qty.): 2, Total Hex Keys (qty.): 17, Hex Tool Type: Folding, Metric (mm): (8) Different Sizes, SAE (in.): 9 Different Sizes, Case Included: Yes Comfort-grip handles

Energy costs are on the rise — Take control with a waste oil fired heater package from Lanair. Waste oil not only eliminates the cost to haul used oil off-site, but it can reduce your heating bills too. In addition, burning waste oil to get &Quot;free&Quot; heat deals with a major pollution problem in an environmentally friendly way. Complete package is designed for commercial use. Advanced atomization technology with monthly maintenance eliminates the tedious daily cleaning required by old vaporization technology. Heat output varies with fuel type, building design, placement and heat loss. U.S.A. This item is not for sale in the state of California. Customers are responsible for checking local codes and regulations prior to purchase. BTU Output: 300,000, Heating Capability (sq. ft.): 10,000, Volts: 120, Amps: 22.2, Blower (CFM): 4,750, Fuel Capacity (gal.): 215, Fuel Type: Waste Oil, Fuel Consumption (gal./hr.): 2.14, Thermostat Included: Yes, Chimney Pipe Size (in.): 8, Chimney Type: Through-roof, Dimensions L x W x H (in.): 48 x 46 x 36 MX-300 heater Pump, filter, fuel piping kit, fuel lines, fittings, and burner Rust-resistant galvanized cabinet Adjustable locking louvers Axial fan 4750 CFM Chimney pipe: Class A kit for 16ft. eave — through-roof Chimney location: Top AC power: 120V, 60Hz Compressed air (customer supplied) : 2 CFM, 15 PSI Combustion chamber: 10 GA CRS Hanging weight (lbs.): 585 UL listed

Energy costs are on the rise — Take control with a waste oil fired heater package from Lanair. Waste oil not only eliminates the cost to haul used oil off-site, but it can reduce your heating bills too. In addition, burning waste oil to get &Quot;free&Quot; heat deals with a major pollution problem in an environmentally friendly way. Complete package is designed for commercial use. Advanced atomization technology with monthly maintenance eliminates the tedious daily cleaning required by old vaporization technology. Heat output varies with fuel type, building design, placement and heat loss. U.S.A. This item is not for sale in the state of California. Customers are responsible for checking local codes and regulations prior to purchase. BTU Output: 300,000, Heating Capability (sq. ft.): 10,000, Volts: 120, Amps: 22.2, Blower (CFM): 4,750, Fuel Capacity (gal.): 215, Fuel Type: Waste Oil, Fuel Consumption (gal./hr.): 2.14, Thermostat Included: Yes, Chimney Pipe Size (in.): 8, Chimney Type: Through-wall, Dimensions L x W x H (in.): 48 x 46 x 36 MX-300 heater Pump, filter, fuel piping kit, fuel lines, fittings, and burner Rust-resistant galvanized cabinet Adjustable locking louvers Axial fan 4750 CFM Chimney pipe: Class A kit for 16ft. eave — through-wall Chimney location: Top AC power: 120V 60Hz Compressed air (customer supplied) : 2 CFM, 15 PSI Combustion chamber: 10 GA CRS Hanging weight (lbs.): 585 UL listed

This 5-panel package is designed to enhance other BPS systems, including 3600 Standby Power Supply (Item# 46001) 120/240 Volt Battery Backup System (Item# 462006) and Renewable Grid-Tie Power System with Battery Backup (Item# 462007). No hunting around for parts or becoming an expert! Everything you cant find locally is included. You get a kilowatt (peak) worth of Solar PV panels that attach to your rooftop mounting rails. You get PV cables to wire your panels together to a PV combiner box, plus all the breakers to safely connect your combined PV output to your maximum power point tracking charge controller to maximize your solar PV harvest. NOTE: Must be installed by a licensed electrician or certified installer. U.S.A. Common Usage: Standby power, Panel Type: Polycrystalline, Solar Panel Wattage: 200, Rated Watts (kW): 1, Material Type: Polysilicon, Solar Panels Included (qty.): 5, Mounting Hardware Included: Yes, Electrician Required: Yes Includes high-quality 1000 Watts of Solar PV and quality components that meet or exceed most incentive programs and comply with National Electric Code

Make your workday easier with a LumberMate portable sawmill. With automated features like Quick-Cycle® sawing, youll be more productive and get bigger jobs done faster. Engineered from the ground up for durability with double-plated steel rails, heavy-gauge tubular steel vertical mounts and a solid frame. U.S.A. Application: Portable milling, HP: 16, Engine: Briggs & Stratton, Engine Type: V-Twin OHV, Start Type: Electric, Handles up to (in.): 34in. dia. logs, 28in.W boards, Rails (in.): 2in.W x 8in.H, Rail Material: Twin double-plated debossed galvanized steel, Cross Bunks (in.): 41in.W at bottom x 11 13/16in.H x 29in.W at top, Cross Bunk Material: 1/4in. powder-coated plate steel, Dimensions L x W x H (in.): 192 x 79 x 60  Shipped knocked down, assembly required

This Grip-On 3-wheel movers dolly is specifically designed for moving furniture, appliances and more. It features a depressed center that makes moving items with legs easier. It also includes a padded surface that protects objects from damage. Rolls on three 1in. swivel plastic casters that provide easy mobility for oversized objects. 2 1/4in.H; 3in. base width; 160lb. capacity. Load Capacity (lbs.): 160, Base Dimensions (in.): 3, Wheels (qty.): 3, Roller Wheel Size (in.): 1, Wheel Type: Plastic swivel caster, Handle Included: No, Single, Pair, or Set: Single

Grip-On socket tray is designed to keep sockets organized and readily available for use. Heavy-duty molded plastic tray with 3/8in.-drive stubs for both shallow and deep sockets. Holds up to 26 SAE sockets from 1/4in. through 1in. Drive (in.): 3/8, Pieces (qty.): 1, Socket Capacity (qty.): 26 SAE, Socket Size Limit: 1/4 in. through 1 in., Material Type: Heavy-Duty Molded Plastic, Standard Compatibility: Yes, Deep Well Compatibility: Yes

Grip-On socket tray is designed to keep sockets organized and readily available for use. Heavy-duty molded plastic tray with 1/2in.-drive stubs for both shallow and deep sockets. Holds up to 28 SAE sockets from 3/8in. through 1 1/4in. Drive (in.): 1/2, Pieces (qty.): 1, Socket Capacity (qty.): 26 SAE, Socket Size Limit: 3/8 in. through 1 1/4 in., Material Type: Heavy-Duty Molded Plastic, Standard Compatibility: Yes, Deep Well Compatibility: Yes

Protect your business from unproductive and expensive downtime! The Ingersoll Rand Duplex Reciprocating Compressor offers two individual 2-stage pumps and two motors mounted on a single 120-gallon horizontal tank, providing 100% built-in backup (youll have a motor and pump running even when one is down) or additional air power for large-capacity jobs. Features the legendary T30 pump with value-added features in a space-saving design. 175 max. PSI, 230V, three-phase. Requires two Ingersoll Rand start-up kits, Item# 15920081 (sold separately). CFM at 175 PSI: 70.4, HP: 10 (2), Volts: 230, Motor Phase(s): 3, Max. PSI: 175, Tank Type: Horizontal, Air Tank Size (gal.): 120, Stage: 2, Drive: Belt, Pump: Cast iron, splash lubricated, Duty Cycle: 100%, Pump Life (hrs.): 10,000, Dimensions L x W x H (in.): 87 x 33 x 52

The remarkable technology designed into a rotary screw air compressor allows it to operate for extended periods at temperatures much lower than those generated by a reciprocating compressor. As a result, rotary screw air compressors are ideal for demanding industrial applications. Warranty on the rotary compressor extends to 2 years with the use of appropriate start-up kit, Item# 305900 (sold separately). Max. PSI: 125, Volts: 200, Amps: 90, HP: 15, Motor Phase(s): 3, Air Tank Size (gal.): 80, Tank Description: Horizontal, Drain System: Manual, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 54 x 29 x 61 Compressor package comes standard with: ODP electric motor Air-cooled aftercooler to reduce discharge air temperatures Full voltage motor starter (mounted and wired) Auto start/stop control Low sound/full sheet metal enclosure Pre-filter 9000-hr. rated Ultra Plus coolant Oil filter and separator element ASME tank NEMA-1 electrical protection

The remarkable technology designed into a rotary screw air compressor allows it to operate for extended periods at temperatures much lower than those generated by a reciprocating compressor. As a result, rotary screw air compressors are ideal for demanding industrial applications. Warranty on the rotary compressor extends to 2 years with the use of appropriate start-up kit, Item# 305900 (sold separately). Max. PSI: 125, Volts: 230, HP: 15, Motor Phase(s): 3, Air Tank Size (gal.): 80, Tank Description: Horizontal, Drain System: Manual, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 54 x 29 x 61 Compressor package comes standard with: ODP electric motor Air-cooled aftercooler to reduce discharge air temperatures Full voltage motor starter (mounted and wired) Auto start/stop control Low sound/full sheet metal enclosure Pre-filter 9000-hr. rated Ultra Plus coolant Oil filter and separator element ASME tank NEMA-1 electrical protection

The remarkable technology designed into a rotary screw air compressor allows it to operate for extended periods at temperatures much lower than those generated by a reciprocating compressor. As a result, rotary screw air compressors are ideal for demanding industrial applications. Warranty on the rotary compressor extends to 2 years with the use of appropriate start-up kit, Item# 305900 (sold separately). Max. PSI: 125, Volts: 460, HP: 15, Motor Phase(s): 3, Air Tank Size (gal.): 80, Tank Description: Horizontal, Drain System: Manual, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 54 x 29 x 61 Compressor package comes standard with: ODP electric motor Air-cooled aftercooler to reduce discharge air temperatures Full voltage motor starter (mounted and wired) Auto start/stop control Low sound/full sheet metal enclosure Pre-filter 9000-hr. rated Ultra Plus coolant Oil filter and separator element ASME tank NEMA-1 electrical protection

The remarkable technology designed into a rotary screw air compressor allows it to operate for extended periods at temperatures much lower than those generated by a reciprocating compressor. As a result, rotary screw air compressors are ideal for demanding industrial applications. CFM at 90 PSI: 28, Max. PSI: 125, Volts: 230, HP: 7 1/2, Air Tank Size (gal.): 80, Tank Description: Horizontal, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 54 x 29 x 61 Compressor package comes standard with: ODP electric motor Air-cooled aftercooler to reduce discharge air temperatures Full voltage motor starter (mounted and wired) Auto start/stop control Low sound/full sheet metal enclosure Prefilter 9000-hr. rated Ultra Plus coolant Oil filter and separator element ASME tank NEMA-1 electrical protection

Quincy Air Master reciprocating air compressors are designed to be a compressor for life. They are built for efficiency and lower operating costs, producing more compressed air at a lower horsepower. They run at a slower RPM, run cooler and cost less to operate. Heavy-duty compressors are engineered for industrial applications and boast a best-in-the-industry 50,000-hour pump life rating. MAX configuration features automatic tank drain, low oil shutdown and heavy-duty aftercooler included. 2-year limited warranty (5-year limited warranty on pump if customer purchases and uses maintenance kit, Item# 325009, sold separately.) Call a sales representative to order maintenance kit. U.S.A. Package Type: Full, Volts: 200 / 208, Motor Phase(s): 3, HP: 15, Amps: 48.3, Max. PSI: 175, Working Pressure (PSI): 145 - 175, CFM at 175 PSI: 51, CFM at 100 PSI: 54.4, Tank Type: Horizontal, Air Tank Size (gal.): 120, Stage: Two, Drive: Belt, Air Outlet Size (in.): 1, After-Cooler Included: Yes, Drain System: Automatic, Portable or Stationary: Stationary, Pump: Cast iron, 4 cylinder, Duty Cycle: 100%, Pump Life (hrs.): 50,000+, Low Oil Protection: Yes, Dimensions L x W x H (in.): 78 x 28 x 55 Heavy-duty industrial motor Industrial-duty general-purpose mounted and wired magnetic starter Less than 5 PPM oil carry-over (blow-by) rating Pump RPM: 923 4-cylinder pump design 2-stage belt drive pump with solid cast iron cylinder Finned intercooler for maximum cooling and increased valve life Aluminum head for heat dissipation Extra-capacity oil reservoir for low oil temperatures Cast iron fly wheel for energy efficiency and durability Splash lubrication Low oil shutdown Heavy-duty aftercooler UL & CSA approval on all electrical components ASME-coded pressure relief valves and tanks Additional charge for liftgate shipping option

Quincy Air Master reciprocating air compressors are designed to be a compressor for life. They are built for efficiency and lower operating costs, producing more compressed air at a lower horsepower. They run at a slower RPM, run cooler and cost less to operate. Heavy-duty compressors are engineered for industrial applications and boast a best-in-the-industry 50,000-hour pump life rating. MAX configuration features automatic tank drain, low oil shutdown and heavy-duty aftercooler included. 2-year limited warranty (5-year limited warranty on pump if customer purchases and uses maintenance kit, Item# 325009, sold separately.) Call a sales representative to order maintenance kit. U.S.A. Package Type: Full, Volts: 230, Motor Phase(s): 3, HP: 15, Amps: 42, Max. PSI: 175, Working Pressure (PSI): 145 - 175, CFM at 175 PSI: 51, CFM at 100 PSI: 54.4, Tank Type: Horizontal, Air Tank Size (gal.): 120, Stage: Two, Drive: Belt, Air Outlet Size (in.): 1, After-Cooler Included: Yes, Drain System: Automatic, Portable or Stationary: Stationary, Pump: Cast iron, 4 cylinder, Duty Cycle: 100%, Pump Life (hrs.): 50,000+, Low Oil Protection: Yes, Dimensions L x W x H (in.): 78 x 28 x 55 Heavy-duty industrial motor Industrial-duty general-purpose mounted and wired magnetic starter Less than 5 PPM oil carry-over (blow-by) rating Pump RPM: 923 4-cylinder pump design 2-stage belt drive pump with solid cast iron cylinder Finned intercooler for maximum cooling and increased valve life Aluminum head for heat dissipation Extra-capacity oil reservoir for low oil temperatures Cast iron fly wheel for energy efficiency and durability Splash lubrication Low oil shutdown Heavy-duty aftercooler UL & CSA approval on all electrical components ASME-coded pressure relief valves and tanks Additional charge for liftgate shipping option

The SHOP FOX® Vertical Mill M1004 is constructed of heavy-duty cast iron and hardened precision ground steel, providing the size and stability to handle the toughest jobs. With a 2 HP motor driving 8 speeds from 78 to 2400 RPM, 3-speed quill feed with a micrometer depth stop and auto reverse, and a variable speed longitudinal power feed, this machine has the ability to do the most complex and precise jobs. For added performance, the M1004 includes a 2-axis digital readout. Item is on backorder until mid-August. HP: 2, Volts: 110/220V pre-wired 110V, Speed (RPM): 78 - 2,400, Speeds (qty.): 8, 360° Head Swivel: No, Draw Bar: Yes, Chuck Size (in.): R - 8, Max. Spindle Distance (in.): 18 3/4, Worktable L x W (in.): 9 x 49, Light Included: No, Stand Included: No, Dimensions L x W x H (in.): 66 1/2 x 66 1/2 x 85 2-axis digital readout with up to 5um resolution, machine error compensation, absolute/incremental coordinate display, arc/line of holes/angled cut functions, and 199 user defined datum points One-shot pump lubrication Auto down feed Quill feeds/spindle rev.: .0019in., .0035in., .0058in. Auto-stop with micro adjustable stop R-8 spindle Longitudinal power feed Hardened and ground table surface Chrome-plated, precision-ground quill Adjustable micrometer quill depth stop Spindle travel: 5in. Table travel (longitudinal): 27in. Table travel (cross): 12in. Max. dist. spindle to column: 18 1/2in. Knee travel: 16in. Head tilt: 45° both ways Head swivel: 90° both ways T-slots: 3 on 2 1/2in. centers, 1/2in. studs Speeds: 78, 98, 197, 278, 670, 850, 1700 and 2400 RPM

This McGuire-Nicholas camo mini phone holder provides a safe place to stow your cell phone while working. Mounting Type: Belt, Works With: Cell phones, Batteries Required: No, Dimensions L x W x H (in.): 3/4 x 2 1/2 x 5 1/2, Material Type: Camouflage fabric, Closure Type: Hook and loop, Includes: Case Fits most small and flip style cell phones Phone stays protected from jobsite conditions 2-way design: vertical loop, horizontal loop and belt clip

Cut your petroleum dependency back and stay warm by burning used crankcase, hydraulic and transmission oil. This super-powered heater produces a ton of heat to warm a very large space. U.S.A. Not for sale in California. BTU Output: 300,000, Heating Capability (sq. ft.): 15,000, Volts: 120, Amps: 20, Blower (CFM): 1,696, Fuel Capacity (gal.): 215, Fuel Type: Waste oil, Fuel Consumption (gal./hr.): 2.08, Thermostat Included: Yes, Chimney Pipe Size (in.): 8, Chimney Type: Class A, Dimensions L x W x H (in.): 54 x 46 x 36 Burns Used W10-W50 crankcase oil 2.08 GPH fuel input

Cut your petroleum dependency back and stay warm by burning used crankcase, hydraulic and transmission oil. This super-powered heater produces a ton of heat to warm a very large space. U.S.A. Not for sale in California. BTU Output: 300,000, Heating Capability (sq. ft.): 15,000, Volts: 120, Amps: 20, Blower (CFM): 1,696, Fuel Capacity (gal.): 215, Fuel Type: Waste oil, Thermostat Included: Yes, Chimney Pipe Size (in.): 8, Chimney Type: Class A, Dimensions L x W x H (in.): 54 x 46 x 36  Burns Used W10-W50 crankcase oil  2.08 GPH fuel input

Hydraulic box dumper is designed for controlled dumping of material from boxes, crates and other types of containers. U.S.A. Load Capacity (lbs.): 4,000, Raised Height (in.): 36, Degree of Angle ( ° ): 135° maximum rotation, Dimensions L x W x H (in.): 67 x 67 x 53, Includes: Protective mesh side screens and hand control 53in. level height 50in.L x 51 1/2in.W usable chute 108in. rotated height 1/2in. lowered height allows for pallet truck loading and unloading 10° chute reach when fully rotated Internal 2 HP power unit Heavy-duty welded steel Painted blue finish

This 2.0 cu. yard capacity invert hopper spread is designed for use with 3/4 to 1 ton pickup trucks. It uses a standard wireless controller that minimizes installation time and allows for easy transfer between vehicles. U.S.A. Recommended Use: 3/4 to 1 ton trucks, Recommended Media: Sand and salt mix, Spinner Material: Poly, Variable Speed: No, Engine Type: 11 HP Honda engine, Hopper Material: Carbon or stainless steel, Frame Construction: Carbon or stainless steel, Includes: Wireless controller Full-length drag chain material movement system conveys the material back to the spinner disc Inverted V and top screens are standard and mounted Battery not included

This special powder with calamine is formulated to absorb excess sweat and reduce skin irritation from chafing. Ideal for butt busting activities like truck driving, motorcycling and extreme sports. U.S.A. Pieces (qty.): 1, Material Type: Powder, Includes: Calamine Absorbs excess sweat Reduces frictional skin irritation Ideal for driving, motorcycling and more May also be applied inside footwear, under sports pads Use on other areas prone to chafing

Production bender with horizontal and vertical positions allows accurate offset bends. Features automatic shut off for voltage fluctuation protection and resetting circuit breaker. Hook attachment on pendant control frees hands while working. U.S.A. Bending Applications: Mild Steel, Stainless Steel, Rigid Conduit, IMC Conduit, EMT Conduit, PVC-Coated Conduit, Max. Bending Capacity - Round (In. dia.): 2, Dies Included: Yes, Dimensions L x W x H (in.): 47 x 33 x 43

This Vestil semi-automatic stretch wrap machine helps to increase productivity in the shipping department or at the end of a production line. Easy to operate, simply depress the foot pedal and manually move the mast up and down. Includes: (1) Machine, Capacity (lbs.): 5,000, Variable Speed: Yes, Power Supply: 115V, 1/2 HP motor with soft start/stop and variable speed control, Foot Control Included: Yes, Material Type: Steel, Assembly Required: Yes Turntable diameter: 54in., Turntable height: 11in. Maximum load diameter: 86in. Maximum load height: 75 Variable RPM 3-12

This Vestil semi-automatic stretch wrap machine helps to increase productivity in the shipping department or at the end of a production line. Easy to operate, simply depress the foot pedal and manually move the mast up and down. U.S.A. Includes: (1) Machine, Capacity (lbs.): 5,000, Variable Speed: Yes, Power Supply: 115V, 1/2 HP motor with soft start/stop and variable speed control, Foot Control Included: Yes, Material Type: Steel, Assembly Required: Yes Turntable diameter: 60in., Turntable height: 11in. Maximum load diameter: 86in. Maximum load height: 75 Variable RPM 3-12

This Vestil portable jib crane features a unique design that allows for easy transportation with a fork truck. U.S.A. Capacity: 1000 lbs. I-beam length: 8ft. I-beam height: 8in. I-beam flange width: 4 1/8in. Base height: 36in. Unique design allows for easy transportation of jib crane with a fork truck Standard base included with jib crane is not filled with concrete (instructions included for proper filling) Base may be ordered pre-filled with concrete for immediate use (Item# 856403, sold separately) Base measures 42in. x 42in. and includes built-in fork tubes Fork tubes are 7 1/2in.W x 2 1/2in.H usable Fixed length I-beam will pivot 360º for complete access Upright vertical column bolts to base Steel construction Assembly required Not for use as a fork truck attachment

This Vestil portable jib crane features a unique design that allows for easy transportation with a fork truck. U.S.A. Capacity: 500 lbs. I-beam length: 10ft. I-beam height: 8in. I-beam flange width: 4in. Base height: 36in. Unique design allows for easy transportation of jib crane with a fork truck Standard base included with jib crane is not filled with concrete (instructions included for proper filling) Base may be ordered pre-filled with concrete for immediate use (Item# 856403, sold separately) Base measures 42in. x 42in. and includes built-in fork tubes Fork tubes are 7 1/2in.W x 2 1/2in.H usable Fixed length I-beam will pivot 360º for complete access Upright vertical column bolts to base Steel construction Assembly required Not for use as a fork truck attachment

Zero lift & tilt table lifts or tilts products to an ergonomic working position, reducing operator bending. U.S.A. Table Type: Zero lift & tilt, Load Capacity (lbs.): 4,000, Platform Size L x W (in.): 52 x 44, Overall Dimensions L x W x H (in.): 59 x 69 x 24, Lowered Height (in.): 1/2, Raised Height (in.): 36, Max. Degree of Tilt: 45, HP: 2 Lifts or tilts products to an ergonomic working position, reducing operator bending Products may be loaded and unloaded with the use of a standard hand pallet truck No pit mounting required Lift and tilt controlled separately Remote power unit with handheld control

Zero lift & tilt table lifts or tilts products to an ergonomic working position, reducing operator bending. U.S.A. Table Type: Zero lift & tilt, Load Capacity (lbs.): 4,000, Platform Size L x W (in.): 52 x 52, Overall Dimensions L x W x H (in.): 59 x 77 x 24, Lowered Height (in.): 1/2, Raised Height (in.): 36, Max. Degree of Tilt: 45, HP: 2 Lifts or tilts products to an ergonomic working position, reducing operator bending Products may be loaded and unloaded with the use of a standard hand pallet truck No pit mounting required Lift and tilt controlled separately Remote power unit with handheld control

This Solo Elbow Nozzle Assembly includes a 4-nozzle assortment that handles multiple spraying applications. These nozzle fit all Solo sprayers except SLC and ECS series. Includes screw cap, flat spray jet, swirl plate and jet cap nozzles. U.S.A. Application: Nozzle Nozzles snap onto the plastic adjustable nozzle

Wheel Diameter (in.): 5, Caster Type: Rigid, Mount Height (in.): 6 1/2 Wheel Size: 5in. Mount Height: 6 1/2in. Capacity: N/A Wheel Type: Rigid

Grade 70 clevis grab hooks, gold finish, to be used with transport (Grade 70) chain. Not to be used for overhead lifting. Grade: 70, Size (in.): 5/16, Load Capacity (lbs.): 4,700, Finish Type: Gold

Combination wrench features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. In mirror finish. Pieces (qty.): 1, SAE Size(s) (in.): 13/16, Material Type: Chrome vanadium steel, Finish Type: Mirror

Combination wrench features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. In mirror finish. Pieces (qty.): 1, SAE Size(s) (in.): 7/8, Material Type: Chrome vanadium steel, Finish Type: Mirror

Manufactured from glass reinforced polypropylene for strength and durability. Schedule 80 design. Hose Diameter (in.): 1 1/2, Connector Type: 90° street elbow, Thread Style: Female thread / male thread, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 120 at 0°F, 150 at 70°F, 90 at 150°F

Manufactured from glass reinforced polypropylene for strength and durability. Schedule 80 design. Hose Diameter (in.): 1 1/2, Connector Type: 90° pipe elbow, Thread Style: Female thread, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 120 at 0°F, 150 at 70°F, 90 at 150°F

Interchangeable with other couplings and adapters. Manufactured from glass reinforced polypropylene. Hose Diameter (in.): 2, Connector Type: Cam action male adapter, Thread Style: Hose barb, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 100 at 0°F, 125 at 70°F, 70 at 150°F

22mm chrome vanadium combination wrench with mirror finish. Pieces (qty.): 1, Metric Size(s) (mm): 22, Material Type: Chrome vanadium steel, Finish Type: Mirror

Combination wrench features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. In mirror finish. Pieces (qty.): 1, SAE Size(s) (in.): 15/16, Material Type: Chrome vanadium steel, Finish Type: Mirror

51-pc. ceramic disc magnet value pack. Each measures 3/4in. dia. x 3/16in. thick. One of our most popular sizes of ceramic disc magnets in a money saving value pack of 51 pieces. Product Style: Holding magnet, Material: Ceramic, Thickness (in.): 3/16, Diameter (in.): 3/4

Round base magnet — 65-lb. pull. 2 2/3in. dia. x 3/8in. thick with 1/4in. hole. This magnetic base has a powerful ceramic ring magnet encased in a durable nickel-plated cup with a mounting hole in the center. The extra strong magnet will hold up to 65 pounds and can suspend heavy items such as speakers and spotlights. Under normal use, permanent magnetism guaranteed. Highly resistant to heat. Product Style: Holding magnet, Material: Ceramic ring, Pulling Power (lbs.): 65, Thickness (in.): 3/8, Diameter (in.): 2 2/3

Used take-offs in good-to-excellent condition. Volts: 12DC, CFM: 100, Dimensions S x D (in): 4 3/4 x 1 1/2 40-.50 Amp draw Mount type design

Size 4 1/2in. x 5/8in. 40 grit. Disc Diameter (in.): 4 1/2, Disc Type: Flap, Disc Thickness (in.): 5/8, Grit: 40, Discs (qty.): 1

Size 4 1/2in. x 5/8in. 60 grit. Disc Diameter (in.): 4 1/2, Disc Type: Flap, Disc Thickness (in.): 5/8, Grit: 60, Discs (qty.): 1

Size 4 1/2in. x 5/8in. 80 grit. Disc Diameter (in.): 4 1/2, Disc Type: Flap, Disc Thickness (in.): 5/8, Grit: 80, Discs (qty.): 1

Sports style frame with ultimate protection. Comfortable spatula temples have soft tips to hug the head. Soft, universal-fit nosebridge and temples flex and adjust to custom fit virtually all face shapes and sizes. Impact-resistant, polycarbonate lenses. Gray lens has DX anti-fog hard coating that resists fog, scratches and most chemicals. Metaliks Sport fuses a brushed nickel frame with an athletic-shaped lens in gray mirror for a sportier look. 99.9% UV protection. Meets ANSI Z87.1 and CSA Z94.3. U.S.A. Eyewear Type: Safety glasses, Adjustable Frame: No, Nose Piece: Soft, Frame Color: Brushed Nickel, Frame Material: Metal, Lens Color: Gray, Lens Type: Polycarbonate, Indoor/Outdoor Use: Outdoor, UV/IR Coated Lens: Yes, Anti-Scratch Lens: Yes, Anti-Fog Lens: Yes, Case Included: No

Sports style frame with ultimate protection. Comfortable spatula temples have soft tips to hug the head. Soft, universal-fit nosebridge and temples flex and adjust to custom fit virtually all face shapes and sizes. Impact-resistant, polycarbonate lenses. Metaliks Sport fuses a brushed nickel frame with an athletic-shaped lens in gray mirror for a sportier look. 99.9% UV protection. Meets ANSI Z87.1 and CSA Z94.3. U.S.A. Eyewear Type: Safety glasses, Adjustable Frame: No, Nose Piece: Soft, Frame Color: Brushed Nickel, Frame Material: Metal, Lens Color: Gray mirror, Lens Type: Polycarbonate, Indoor/Outdoor Use: Yes, UV/IR Coated Lens: Yes, Anti-Scratch Lens: Yes, Anti-Fog Lens: No, Case Included: No

Sports style frame with ultimate protection. Comfortable spatula temples have soft tips to hug the head. Soft, universal-fit nosebridge and temples flex and adjust to custom fit virtually all face shapes and sizes. Impact-resistant, polycarbonate lenses. Lens has DX anti-fog hard coating that resists fog, scratches and most chemicals. Metaliks Sport fuses a brushed nickel frame with an athletic-shaped lens in gray mirror for a sportier look. 99.9% UV protection. Meets ANSI Z87.1 and CSA Z94.3. U.S.A. Eyewear Type: Safety glasses, Adjustable Frame: No, Nose Piece: Soft, Frame Color: Brushed Nickel, Frame Material: Metal, Lens Color: Amber, Lens Type: Polycarbonate, Indoor/Outdoor Use: Outdoor, UV/IR Coated Lens: Yes, Anti-Scratch Lens: Yes, Anti-Fog Lens: Yes, Case Included: No

Mfg. P/N: B93028 Key: J Not an OEM part Compatible With: Western plows, Recommended Use: Hitch pin Pin connects plow to frame of vehicle

The Watersource well point drive coupling joins metal pipe in well point driving applications. Material: Galvanized, Pipe Diameter (in.): 1 1/4, Length (in.): 3 Strong galvanized coupling assures better driving of well points Design assures a tight joint at pipe

5 micron, carbon-wrapped cartridge for use with whole-house water filter Item# 108881. Helps reduce rust, sediment and odor while improving taste. 15,000 gallon/3-month cartridge; 2 9/16in.-dia.; 9 13/16in.H. Typical Application: Replacement water filter, Filtration (Microns): 5, Filter Type: C carbon cartridge, Capacity: 15,000 gallons or 3 months, Compatible With Item Number (s): 108881, Dimensions D x H (in.): 2 9/16 x 9 13/16

These Milwaukee cutter wheels are designed for use with the Milwaukee M12 copper tubing cutter (Item#s 247120, 247121 and 24122). Works With: Milwaukee M12 Copper Tubing Cutter, Application: Designed for Cutting Copper Tubing, Wheel Type: Cutter 2-pk.

Chrome side wedge acts as a perimeter to retain shelf items and prevent anything from falling off. 12in. deep Chrome

Compatible With: Meyer plows, Recommended Use: Hinge pin, Pin Length (in.): 7 3/4, Pin Diameter (in.): 5/8, Includes: Clips Replaces OEM# Meyer 08562 Not an OEM Part

Universal tool removes molding on all makes and models of cars without damaging windshield. Works in either direction.

Two-color poly tarp is green on one side, brown on other side. 3 oz. per sq. yd. 10 x 10 mesh. Water-resistant, rot and mildew-resistant. UV resistant. Rope reinforced edges for extra strength. Heavy-duty rust-resistant aluminum grommets at corners and approx. every 3 feet along all 4 edges. Dimensions L x H ( ft.): 8 x 10, Color: Brown / green, Material Type: Polyethylene, Water Resistant: Yes, Mildew Resistant: Yes, UV Inhibitors: Yes, Grommet Material: Aluminum, Grommet Spacing (ft.): 3 Not related to WELBILT® products of Enodis companies

Durable snap-ring pliers with 90° angled tip. Drop-forged steel with serrated jaws and spring. Comfortable, nonslip PVC grips. Pieces (qty.): 1, Internal / External: Internal, Tool Length (in.): 7, Tip Type: 90° Angled Tip, Material Type: Drop-forged steel, Handle Type: Nonslip PVC grips

1in. x 12in. reflector with PSA back. 2 reflectors per package. Use as a reflector or can be combined with our Item# 127901 to create conspicuity lighting on your trailer. U.S.A. Reflector Type: Tape, Reflector Color: White, Reflector Size L x W (in.): 12 x 1, Reflectors Included (qty.): 2 Will not fade from UV light Meets DOT-108 standards for trailers 80in. wide or wider and over 10,000 lb. GVWR Rated DOT-C

1in. x 12in. red reflector comes 2 per package. PSA back. Can be used as a reflector or combined with our Item# 127900 to create conspicuity lighting on your trailer. U.S.A. Reflector Type: Tape, Reflector Color: Red, Reflector Size L x W (in.): 12 x 1, Reflectors Included (qty.): 2 Will not fade from UV light Meets DOT-108 standards for trailers 80in. wide or wider and over 10,000 lb. GVWR Rated DOT-C

Durable grab handles are built to last. Length (in.): 18, Diameter (in.): 5/8, Material: Aluminum, Finish Type: Bright anodized 18in. Solid Aluminum 5/8in. Dia. Round Bright anodized finish

Durable grab handles are built to last. Length (in.): 16, Material: Solid aluminum, Finish Type: Bright anodized 16in. solid aluminum anodized grab handle Flat

Mechanics shop towels are made of absorbent and durable cotton. Good for removing dirt and grime from tools and parts. Towel size is 13in. x 14in. Application: Shop towels, Material: Cotton, Dimensions L x W (in.): 13 x 14, Includes: 25 towels

This Libman big scrub brush sports 164 tufts of 1 1/4in.L polymer fibers for all-purpose scrubbing of floors, cars, garages, bathrooms and other cleaning applications. Features an 8in. x 3 1/2in. pointed scrubbing surface to reach into corners. Ergonomic grip provides extra knuckle room and has built-in hanger hole for easy storage. U.S.A. Application: Brushes, Max. Width (in.): 4 1/2, Length (in.): 9, Material: Resin / polymer, Handle Length (in.): 5, Includes (qty.): 1 General multi-purpose scrub brush The handle has a molded in rubber grip to improve grip even when hands are wet

This 60in. steel handle from Libman is an ideal replacement handle for all Libman resin block threaded push brooms. It is made of 1in. dia. steel tubing and has a 5in. handle grip, durable nylon thread and hanger hole. Replacement handles available (sold separately). U.S.A. Application: Replacement handle, Length (in.): 60, Material: Steel / nylon, Handle Length (in.): 60, Includes (qty.): 1 The handle has a standard thread and can be used on most tools with a threaded connection Handle is made from recycled steels and is painted using e-coat technology reducing impact on the environment and making the handle more resistant to rust/corrosion than a chemically painted handle

This Libman long handle tampico scrub brush is equipped with 62 tufts of 2in. long stapled natural tampico fibers to form a large 5in. x 6in. scrubbing surface. Fibers are acid resistant. Head also has a 2 1/2in. wide scraper for tough cleaning jobs. Apply some elbow grease with the 19in. long grooved polymer handle with built-in hanger hook. U.S.A. Application: Brushes, Max. Width (in.): 4, Length (in.): 19, Material: Tampico / polymer, Handle Length (in.): 19

Laminated, strong 14 x 14 mesh tarp. 5 oz. per sq. yd. UV and water resistant. Heavy-duty rust-resistant aluminum grommets every two feet. Rope reinforced edges for extra strength. Corners reinforced with plastic patch. Dimensions L x W (ft.): 6 x 8, Material Type: Polyethylene/nylon, Material Thickness (oz. per Sq. yd.): 5, Material Thickness (mils): 10, Material Thickness (denier): 1,000, UV Inhibitors: Yes, Water Resistant: Yes, Mildew Resistant: Yes, Grommet Spacing (ft.): 2 Not related to WELBILT® products of Enodis companies

Fits twist grip #1380 & #13801. 50in. housing, 54in. cable. Barrel end. Application: Control cable, Length (in.): 54, Compatible With Item Number (s): 1380, 13801

Replacements for 124, 125 and 126 hub sets. U.S.A. Includes (qty.): 5

The Farm-Tuff fence tightener handle is designed for use with the 10-pk. of Farm-Tuff fence tighteners, Item# 143783. Application: Fence tightening, Recommended Use: Tightening wire, Works With: Fence tighteners, Compatible With Item Number (s): 143783

The TruckStar security hasp is ideal for truck and trailer applications, especially for use with heavy doors. Length (in.): 7 3/8, Material: Zinc plated steel Ideal for truck and trailer applications, especially for use with heavy doors Mounting screws included

The American Moving Supplies ProSeries mattress bag protects your investment from dust, dirt, water and oil. U.S.A. Sturdy 1.5mil construction 78in. x 14in. x 100in.

Catch your fish NTE-style with this versatile Rapala lure. Classic lipless design is hand tuned and tank tested and can be cast or trolled; unique rattle chamber attracts a wide variety of fish. Common Usage: Fishing, Single, Pair, or Set: Single, Color: Yellow

Direct replacement lens for Item# S1592, Deluxe Blasting Hood. U.S.A. Common Usage: Replacement lens, Compatible With Item Number (s): S1592, Dimensions W x H (in.): 5 x 3, Material Type: Plexiglass

Unique swivel inlet allows air tool or air hose to move freely, improving tool or hose flexibility. Chrome-plated finish and protected by flexible rubber boot. 1/4in. male to 1/4in. male union. U.S.A. Coupler Size (in.): 1/4, Male or Female: M, Swivels: Yes, Material Type: Chrome-plated, rubber, Pieces (qty.): 1 Temperature range: -37° to 176°F U.S.A.

Rugged 11-1/2in. flexible hose attaches to grease gun #15027 to reach all fittings faster and easier. A real necessity for zerks in tight spots and awkward locations. Accessory Type: Whip hose extension, Compatible With: Northern item# 15027, Pieces (qty.): 1, Length (in.): 11 1/2, Storage Case Included: No

Assortment includes 5 frequently used grinding stones for die grinders. 1/4in. shank. Application: Die grinder

high quality Ingersoll Rand Type 1 discs are designed for use with your air cutoff tool to cut through metal materials. Common applications include cutting exhaust pipes, trimming bolts, and slicing through sheet metal. The fiber reinforcement and the 1/16in. thickness produces a disc that cuts quickly but remains durable. Wheel Diameter (in.): 3, Wheel Thickness (in.): 1/16, Arbor Size (in.): 3/8, Wheels (qty.): 5, Wheel Type: Cutoff, Recommended Use: Cutting metal: exhaust, bolts, sheet metal Fiber reinforced material ensures long life, saving you time and material costs 3in. width and 1/16in. thickness allows quick cutting, saving you time 3in. x 1/16in. discs with 3/8in. arbor Designed for cutting metal

Fits Ingersoll Rand compressors with model#s beginning with SS3. Application: Filter, Includes: (1) Filter

Use with Wagner 9in. Power Roller, Turbo Roller Painting Stick and Paint N Roll. 3/4in. nap for rough surfaces. 100% polyester blend nap. Store in upright position after cleaning for repeat usage. Roller Size (in.): 9 x 3/4 nap, Rollers (qty.): 1

Sockets are designed to extend the life of fasteners! The socket radius corner grabs the sturdy wall of the fastener instead of just the corners, resulting in less wear on the fastener. Forged from chromium molybdenum alloy steel for strength and durability. Sold individually. Drive (in.): 1/2, Point Size (qty.): 6, Metric Socket Size (mm): 13, Material Type: Chromium Molybdenum, Deep Well: Yes

Aluminum oxide flap discs are designed for light grinding, deburring, paint and rust removal. Includes 36, 60 and 120 grit discs. 13,300 max. RPM. Disc Diameter (in.): 4 1/2, Disc Type: Flap, Disc Thickness (in.): 7/8, Max. RPM: 13,300, Grit: 36, 60, 120, Discs (qty.): 3

For use with Item# 155702. 3/4in. x 1 1/2in. shank size. 3in. depth capacity. Chisel Type: Mortising, Bit Diameter (in.): 3/8, Shaft Diameter (in.): 3/4, Reduced Shaft Length (in.): 5 1/2, Reduced Shaft Diameter (in.): 9/32, Depth Capacity (in.): 3, Length of Travel (in.): 2 3/4

5-pack 3 11/16in.L. Teeth/Inch: 32. Typical Application: Replacement blade, Blade Included: Yes, Case Included: No, Tool Weight (lbs.): 1/4, Length (in.): 3 11/16, Includes (qty.): 5-pk.

5-pack 3 11/16in.L. Teeth/Inch: 24. Typical Application: Replacement blade, Blade Included: Yes, Case Included: No, Tool Weight (lbs.): 1/4, Length (in.): 3 11/16, Includes (qty.): 5-pk.

A36-P chop-saw blade made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops. Aluminum oxide is recommended for all types of ferrous metals. Wheel dimensions are diameter x thickness x arbor. Wheel Diameter (in.): 14, Wheel Thickness (in.): 7/64, Arbor Size (in.): 1, Max. RPM: 4,365, Wheels (qty.): 1, Wheel Type: A36-P, Recommended Use: Ferrous metals Aluminum oxide is recommended for all types of ferrous metals

Generac RV generator exhaust hanger with clamp fits all Generac RV models and tail pipes. U.S.A. Application: Exhust hanger, Dimensions L x W x H (in.): 9 x 4 x 1 1/4 9in.L x 4in.W x 1 1/4in.H

High speed metal cut-off blade made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops. Wheel Diameter (in.): 12, Wheel Thickness (in.): 1/8, Max. RPM: 6,200, Wheels (qty.): 1, Recommended Use: Ferrous metals Aluminum oxide is recommended for all types of ferrous metals Wheel dimensions are diameter x thickness x arbor Dimensions: 12in. x 1/8in. x 1in.

Discs ideal for cleaning, conditioning, light deburring, blending and more. Speedlok feature - also compatible with 3M Roloc™. Can also be used to remove light rust, oxidation and scratches. U.S.A. Disc Diameter (in.): 2, Disc Type: Surface prep, Grit: Medium, Discs (qty.): 5

Discs ideal for cleaning, conditioning, light deburring, blending and more. Speedlok feature - also compatible with 3M Roloc™. Can also be used to remove light rust, oxidation and scratches. U.S.A. Disc Diameter (in.): 2, Disc Type: Surface prep, Grit: Course, Discs (qty.): 5

This Northern Industrial Tools Replacement Grinding Wheel is used with Item# 193021 Application: Grinding wheel, Wheel Diameter (in.): 3 15/16, Arbor Size (in.): 7/8, Includes (qty.): 1

6000 max. RPM. 1/4in. shank Shank Diameter (in.): 1/4, File Material: Steel, Tip Shape: Cylindrical, Max. RPM: 6,000, Files (qty.): 1

Nylon cable ties in a pack of 1000. Each is 4in. long in white. Great for hundreds of uses, including electrical, home, garden, auto and marine. Length (in.): 4, Pieces (qty.): 1,000, Material: Nylon

Length (in.): 4 - 11, Pieces (qty.): 900, Material: Nylon Includes: 300-4in. Natural 400-4in. Colored 150-8in. Natural 50-11in. Natural

Hard wrought steel and hardened steel body. Hardened steel staple and locking eyes. Accepts up to 1/2in. dia. shackle. Tamperproof hinges. Model 704DPF. 2-year limited warranty. Length (in.): 4 1/2, Material: Hard wrought steel

Quality padlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability, and each offers a limited lifetime guarantee. Length (in.): 3 1/2, Material: Hard wrought steel Hardened steel staples resist cutting and sawing Hardened steel locking eyes for strong cut resistance Tamper proof hinges help resist prying Accepts shackle diameter up to 11/32in. Limited lifetime warranty U.S.A. Model 703D

U.S.A. Bin Type: Magnum Bins, Dividers (qty.): 1, Compatible With Item Number (s): 178400

U.S.A. Bin Type: Magnum Bins, Dividers (qty.): 1, Compatible With Item Number (s): 178401

Clear replacement window for Item #174653 (Model# 90028-80025). Meets ANSI Z87.1 and CSA Z94.3 standards. U.S.A. Eyewear Type: Faceshield, Lens Color: Clear, Lens Type: Polycarbonate, Indoor/Outdoor Use: Yes, UV/IR Coated Lens: No, Anti-Scratch Lens: No, Anti-Fog Lens: No, Case Included: No

High-speed hub replacement seals. Constructed of rubber coated steel. Sold as a pair. Seal Size ID (in.): 1 1/4, Seals Included (qty.): 2

The RhinoGear Less Mess Oil Drain Pan™ is designed to capture the full stream of oil from the highest pressure flow to the very last drop, reducing the need to adjust the pan mid-change. The oil filter stand allows for complete filter draining and keeps it out of the oil and within easy reach. U.S.A. Tank Size (gal.): 2 3/4, Drain Bowl Height (in.): 4, Dimensions L x W x H (in.): 22 1/2 x 12 1/2 x 4 Tough structure, sturdy handles on all sides and a corner pour feature allow for easy transport and transfer into a recycling container Large enough to hold up to two oil changes or 11 quarts of oil

This OREGON® Chain Saw Scrench Tool combines a working screwdriver and wrench into a single tool and is especially designed for use in chain saw maintenance. Its an ideal choice for making adjustments to the bar. Application: Scrench, Works With: Oregon chain saws Includes 13mm x 19mm (approx. 3/4in. x 1/2in.) wrench ends Steel construction 7.25in.L x 2.75in.W x 1in.H

Kevlar® V-belts with Kevlar Cord are durable and long lasting compared to V-belts made with polyester cords. Designed to withstand heat, oil and back idler pulleys associated with outdoor power equipment. 35in.L x 1/2in.W. Application: Replacement Kevlar V-belt, Material Type: Kevlar, Dimensions L x W x H (in.): 35 x 1/2 x 5/16 V-Belt Replacement Belt for: MXV4350 MTD/CUB CADET 248-018 STENS 265-433 LASER SALES 265-443 STENS 265433 STENS 6517BR NAPA 75-148 OREGON 75-435 OREGON 75148 OREGON 754-0101 MTD/CUB CADET 754-0101A MTD/CUB CADET 7540101 MTD/CUB CADET 754101 WESTERN AUTO 9540101 MTD/CUB CADET 95550 ZIP-LASER

This soft, non-woven Wel-Bilt Moving Blanket is an essential tool for protecting furniture or other items during a move or in storage. Dimensions L x W (in.): 80 x 72, Filler Material: Cotton / poly, Filler Weight (oz. per sq. ft.): 2.4, Binding Material: Nonwoven, Double Stitched: Yes, Outer Material: Nonwoven poly binding Not related to WELBILT® products of Enodis companies

Hardened stainless steel orifice nozzles last up to 5 times longer than ordinary nozzles. 1/4in. NPT male thread. U.S.A. Size (in.): 4.5, Thread Size (in.): 1/4, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

U.S.A. 4.5 nozzle size 0 degree spray pattern

Hardened stainless steel orifice nozzles last up to 5 times longer than ordinary nozzles. U.S.A. Size (in.): 4.0, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel orifice nozzles last up to 5 times longer than ordinary nozzles. 1/4in. NPT male thread. U.S.A. Size (in.): 3.5, Thread Size (in.): 1/4, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 4.5, Material: Stainless steel, Degree of Angle ( ° ): 40, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 4.5, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel nozzles fit directly on our pressure washers. U.S.A. Size (in.): 3.0, Material: Stainless steel, Degree of Angle ( ° ): 0, Includes (qty.): 1

Hardened stainless steel nozzles fit directly on our pressure washers. U.S.A. Size (in.): 3.0, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel orifice nozzles last up to 5 times longer than ordinary nozzles. 1/8in. NPT male thread. U.S.A. Size (in.): 2.0, Thread Size (in.): 1/8, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel orifice nozzles last up to 5 times longer than ordinary nozzles. 1/4in. NPT male thread. U.S.A. Size (in.): 2.0, Thread Size (in.): 1/4, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 4.5, Material: Stainless steel, Degree of Angle ( ° ): 0, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 4.5, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles fit directly on our pressure washers. U.S.A. Size (in.): 3.0, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1 Nozzle Size: 3.0 Spray Pattern: 25°

Hardened stainless steel nozzles fit directly on our pressure washers. U.S.A. Size (in.): 3.0, Material: Stainless steel, Degree of Angle ( ° ): 40, Includes (qty.): 1

Bendable telescoping magnet pickup extends to 19in. Lifts up to 2 pounds. This magnet can be bent to any position to retrieve items in the most awkward of places. Tip contains a powerful neodymium magnet. Product Style: Retrieving magnet, Material: Neodymium, Pulling Power (lbs.): 2, Height (in.): 19

6-pc. red, white and blue magnetic push pins. 5/8in.D x 5/8in.H. Powerful neodymium magnets encased in colorful plastic shapes are useful for posting memos, invoices and photos. Package contains 2 red circles, 2 blue squares, and 2 white triangles. Product Style: Holding magnet, Material: Neodymium, Diameter (in.): 5/8

Hardened stainless steel nozzles. U.S.A. Size (in.): 5.0, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 5.5, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless-steel nozzles. U.S.A. Size (in.): 6.0, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 6.5, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 7.0, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 7.5, Material: Stainless steel, Degree of Angle ( ° ): 15, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 3.5, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 5.0, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 5.5, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 6.0, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 4.0, Material: Stainless steel, Degree of Angle ( ° ): 0, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Nozzle Size: 6.5 Spray Pattern: 25°

Hardened stainless steel nozzles. U.S.A. Size (in.): 7.0, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 7.5, Material: Stainless steel, Degree of Angle ( ° ): 25, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 4.0, Material: Stainless steel, Degree of Angle ( ° ): 40, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 5.0, Material: Stainless steel, Degree of Angle ( ° ): 40, Includes (qty.): 1

Hardened stainless steel nozzles. U.S.A. Size (in.): 5.5, Material: Stainless steel, Degree of Angle ( ° ): 40, Includes (qty.): 1