Constructed of high-strength (55,000 PSI) steel for long life. U.S.A. Material Type: High-strength (55,000 PSI) steel, Pattern Design: Diamond-plate deck, Ramp Length (in.): 66, Ramp Width (in.): 60, Load Capacity (lbs.): 30,000, Height Difference (in.): 11 1/2, Osha Approved: Yes Beveled edges on both ends for smooth entry and exit Welded safety curbs for maximum strength Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts Standard with leverlift for quick portability with fork truck

Constructed of high-strength (55,000 PSI) steel for long life. U.S.A. Material Type: High-strength (55,000 PSI) steel, Pattern Design: Diamond-plate deck, Ramp Length (in.): 66, Ramp Width (in.): 66, Load Capacity (lbs.): 30,000, Height Difference (in.): 11, Osha Approved: Yes Beveled edges on both ends for smooth entry and exit Welded safety curbs for maximum strength Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts Standard with leverlift for quick portability with fork truck

Constructed of high-strength (55,000 PSI) steel for long life. U.S.A. Material Type: High-strength (55,000 PSI) steel, Pattern Design: Diamond-plate deck, Ramp Length (in.): 72, Ramp Width (in.): 72, Load Capacity (lbs.): 20,000, Height Difference (in.): 12, Osha Approved: Yes Beveled edges on both ends for smooth entry and exit Welded safety curbs for maximum strength Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts Standard with leverlift for quick portability with fork truck

Constructed of high-strength (55,000 PSI) steel for long life. U.S.A. Material Type: High-strength (55,000 PSI) steel, Pattern Design: Diamond-plate deck, Ramp Length (in.): 60, Ramp Width (in.): 72, Load Capacity (lbs.): 30,000, Height Difference (in.): 10, Osha Approved: Yes Beveled edges on both ends for smooth entry and exit Welded safety curbs for maximum strength Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts Standard with leverlift for quick portability with fork truck

Constructed of high-strength (55,000 PSI) steel for long life. Deck is checkered for safe efficient use. U.S.A. Material Type: High-strength (55,000 PSI) steel, Pattern Design: Diamond-plate deck, Ramp Length (in.): 72, Ramp Width (in.): 60, Load Capacity (lbs.): 30,000, Height Difference (in.): 12, Osha Approved: Yes Beveled edges on both ends for smooth entry and exit Welded safety curbs for maximum strength Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts Standard with leverlift for quick portability with fork truck

Constructed of high-strength (55,000 PSI) steel for long life. U.S.A. Material Type: High-strength (55,000 PSI) steel, Pattern Design: Diamond-plate deck, Ramp Length (in.): 66, Ramp Width (in.): 72, Load Capacity (lbs.): 30,000, Height Difference (in.): 11, Color: Silver, Osha Approved: Yes Beveled edges on both ends for smooth entry and exit Welded safety curbs for maximum strength Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts Standard with leverlift for quick portability with fork truck

This Vestil Quick Lift transports and positions loads quickly with just a push of a button. U.S.A. Capacity: 175 lbs. Platform Size: 24in.W x 19in.L Service Range: 5 1/2in. to 57in. Caster Size: 3in. Quiet, lightweight unit transports and positions loads quickly with just a push of a button High-density polyethylene platform makes these lifts ideal for clean room operations 9in. horizontal load center Low-profile design for maneuvering in narrow aisles and confined spaces Poly casters; two swivel and two swivel locking 24V battery and 110V AC charger Detachable handheld control with coil cord for remote operation is optional Optional programmable height indexing option allows user to preset multiple working heights at a touch of a button

This Vestil Quick Lift transports and positions loads quickly with just a push of a button. U.S.A. Capacity: 125 lbs. Platform Size: 19in.L x 24in.W Service Range: 5 1/2in. to 72in. Caster Size: 3in. Quiet, lightweight unit transports and positions loads quickly with just a push of a button High-density polyethylene platform makes these lifts ideal for clean room operations 9in. horizontal load center Low-profile design for maneuvering in narrow aisles and confined spaces Poly casters; two swivel and two swivel locking 24V battery and 110V AC charger Detachable handheld control with coil cord for remote operation is optional Optional programmable height indexing option allows user to preset multiple working heights at a touch of a button

Constructed of high-strength (55,000 PSI) steel for long life. U.S.A. Material Type: High-strength (55,000 PSI) steel, Pattern Design: Diamond-plate deck, Ramp Length (in.): 72, Ramp Width (in.): 66, Load Capacity (lbs.): 30,000, Height Difference (in.): 12, Osha Approved: Yes Beveled edges on both ends for smooth entry and exit Welded safety curbs for maximum strength Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts Standard with leverlift for quick portability with fork truck

The METALpro MP9500 Hydraulic Tube Bender easily handles a wide variety of professional, farm, and industrial production jobs. Using different 3-pc. die sets (sold separately), the MP9500 can bend square and round tubing from 1/2in. to 2in. and pipe from 1/2in. to 1 1/2in. up to 180°. U.S.A. Bending Applications: Round tubing, square tubing, conduit, round rod, pipe, Max Bending Radius (deg.): 180, Max. Bending Capacity - Round (In. dia.): 2, Dies Included: No, Dimensions L x W x H (in.): 24 x 41 x 66 The MP9500 is ideal for: Railing and gate construction Trailer manufacturing Frames for storage structures Picnic table frames and other furniture Metalworking education in high schools and vocational schools

This Vestil pallet master/server enables one person to easily move fully loaded pallets, skids and crates (with or without an understructure) without the use of a fork truck. U.S.A. Load Capacity (lbs.): 1,200, Lowered Height (in.): 3, Raised Height (in.): 50, Extension Width (in.): 4, Fork Thickness (in.): 1 1/2, Extension Length (in.): 36, Width Between Forks (in.): Adjustable 8in. - 37in., Wheel Size (in.): 8 x 2, Wheels (qty.): 2, Caster Type: Swivel, Caster Size (in.): 8 x 2, Material Type: Steel, Includes: Built-in, key-operated ON/OFF control for better security and floor lock Unique straddle design works well with pallets and skids with and without an understructure Ideal for loading and unloading semi-trailers 12V DC power standard with on-board charger Push buttons to raise and lower lift are located on power unit Hand control on coil cord

This Vestil pallet master/server enables one person to easily move fully loaded pallets, skids and crates (with or without an understructure) without the use of a fork truck. U.S.A. Load Capacity (lbs.): 1,200, Lowered Height (in.): 3, Raised Height (in.): 60, Extension Width (in.): 4, Fork Thickness (in.): 1 1/2, Extension Length (in.): 36, Wheel Size (in.): 8 x 2, Wheels (qty.): 2, Caster Type: Swivel, Caster Size (in.): 8 x 2, Material Type: Steel, Includes: Built-in, key-operated ON/OFF control for better security and floor lock Unique straddle design works well with pallets and skids with and without an understructure Ideal for loading and unloading semi-trailers AC power operation Push buttons to raise and lower lift are located on power unit Hand control on coil cord

This Vestil pallet master/server enables one person to easily move fully loaded pallets, skids and crates (with or without an understructure) without the use of a fork truck. U.S.A. Load Capacity (lbs.): 1,200, Lowered Height (in.): 3, Raised Height (in.): 60, Extension Width (in.): 4, Fork Thickness (in.): 1 1/2, Extension Length (in.): 36, Wheel Size (in.): 8 x 2, Wheels (qty.): 2, Caster Type: Swivel, Caster Size (in.): 8 x 2, Material Type: Steel, Includes: Built-in, key-operated ON/OFF control for better security and floor lock Unique straddle design works well with pallets and skids with and without an understructure Ideal for loading and unloading semi-trailers Air/oil operation Push buttons to raise and lower lift are located on power unit Hand control on coil cord

This Vestil pallet master/server enables one person to easily move fully loaded pallets, skids and crates (with or without an understructure) without the use of a fork truck. U.S.A. Load Capacity (lbs.): 1,200, Lowered Height (in.): 3, Raised Height (in.): 60, Extension Width (in.): 4, Fork Thickness (in.): 1 1/2, Extension Length (in.): 36, Wheel Size (in.): 8 x 2, Wheels (qty.): 2, Caster Type: Swivel, Caster Size (in.): 8 x 2, Material Type: Steel, Includes: Built-in, key-operated ON/OFF control for better security and floor lock Unique straddle design works well with pallets and skids with and without an understructure Ideal for loading and unloading semi-trailers 12V DC power standard with on-board charge Push buttons to raise and lower lift are located on power unit Hand control on coil cord

This Vestil pallet master/server enables one person to easily move fully loaded pallets, skids and crates (with or without an understructure) without the use of a fork truck. U.S.A. Load Capacity (lbs.): 1,200, Lowered Height (in.): 3, Raised Height (in.): 72, Extension Width (in.): 4, Fork Thickness (in.): 1 1/2, Extension Length (in.): 36, Wheel Size (in.): 8 x 2, Wheels (qty.): 2, Caster Type: Swivel, Caster Size (in.): 8 x 2, Material Type: Steel, Includes: Built-in, key-operated ON/OFF control for better security and floor lock Unique straddle design works well with pallets and skids with and without an understructure Ideal for loading and unloading semi-trailers AC power operation Push buttons to raise and lower lift are located on power unit Hand control on coil cord

This Vestil pallet master/server enables one person to easily move fully loaded pallets, skids and crates (with or without an understructure) without the use of a fork truck. U.S.A. Load Capacity (lbs.): 1,200, Lowered Height (in.): 3, Raised Height (in.): 72, Extension Width (in.): 4, Fork Thickness (in.): 1 1/2, Extension Length (in.): 36, Wheel Size (in.): 8 x 2, Wheels (qty.): 2, Caster Type: Swivel, Caster Size (in.): 8 x 2, Material Type: Steel, Includes: Built-in, key-operated ON/OFF control for better security and floor lock Unique straddle design works well with pallets and skids with and without an understructure Ideal for loading and unloading semi-trailers Air/oil operation Push buttons to raise and lower lift are located on power unit Hand control on coil cord

This Vestil pallet master/server enables one person to easily move fully loaded pallets, skids and crates (with or without an understructure) without the use of a fork truck. U.S.A. Load Capacity (lbs.): 1,200, Lowered Height (in.): 3, Raised Height (in.): 72, Extension Width (in.): 4, Fork Thickness (in.): 1 1/2, Extension Length (in.): 36, Wheel Size (in.): 8 x 2, Wheels (qty.): 2, Caster Type: Swivel, Caster Size (in.): 8 x 2, Material Type: Steel, Includes: Built-in, key-operated ON/OFF control for better security and floor lock Unique straddle design works well with pallets and skids with and without an understructure Ideal for loading and unloading semi-trailers 12V DC power standard with on-board charge Push buttons to raise and lower lift are located on power unit Hand control on coil cord

This Vestil deluxe overhead load lifter is designed for lifting and moving pallets, skids and crates with an overhead lifting crane. U.S.A. Capacity (lbs.): 4,000, Opening (in.): 40 3/4 x 52 1/2 x 64 1/2, Load Range: 51 x 62 3/4 x 74 1/2, Adjustable: Yes, Bale Opening (in.): Includes an adjustable bail for keeping the load level when moving, Fork Length (in.): 42, Fork Width (in.): 17 1/2, Dimensions L x W x H (in.): 42 x 4 x 2 (Overall fork dimensions), Material Type: Welded steel, Finish Type: Painted, Includes: (3) Height positions for use with different sized loads

Minimize lifting and dumping heavy trash cans with the Vestil trash can dumper with hand control. One person can easily and safely empty trash cans weighing up to 300 lbs. into dumpsters. U.S.A. Load Capacity (lbs.): 300, Raised Height (in.): 60, Degree of Angle ( ° ): Hand crank rotates containers to 135° angle, Dimensions L x W x H (in.): 61 x 42 1/2 x 79, Caster Material: Poly on steel, Caster Type: (2) Swivel, (2) Rigid, Includes: 95 gallon poly tote Automatic container clamp securely holds the trash can container Comes with 4 casters for easy maneuverability and heavy-duty mesh sides for safety

Minimize lifting and dumping heavy trash cans with the Vestil trash can dumper with electric winch. One person can easily and safely empty trash cans weighing up to 300 lbs. into dumpsters. U.S.A. Load Capacity (lbs.): 300, Raised Height (in.): 60, Degree of Angle ( ° ): 115V, 1 phase, push-button actuation rotates containers to 135° angle, Dimensions L x W x H (in.): 61 x 42 1/2 x 79, Caster Material: Poly on steel, Caster Type: (2) Swivel, (2) Rigid, Includes: 95 gallon poly tote Automatic container clamp securely holds the trash can container Comes with 4 casters for easy maneuverability Heavy-duty mesh sides for safety

This Vestil LP tank truck provides an easy answer to lifting storing and transporting problems associated with LP tanks. All-in-one cart will allow the user to transport LP tanks to the location they are needed. U.S.A. Common Usage: LP tank truck, Compatible With: Full LP tanks, Capacity: (6) Tanks: (2) Vertical; (4) Horizontal, Dimensions L x W x H (in.): 80 x 33 x 73, Remote Included: No, Material Type: Welded steel, Finish Type: Painted, Cylinders (qty.): 6 Max. Built-in crane can be used to safely load full tanks into fork trucks Crane pivots 360° for maximum versatility Crane boom is raised and lowered with a manual hand pump hydraulic lift Tank attachment at the end of the boom automatically clamps to each end of the cylinder Unit includes a push handle with 2 rigid and 2 swivel casters for portability

Durahook is the “Stay-Put Locking Pegboard Hook.” Hook locks into place on both 1/8in. or 1/4in. pegboard both vertically or horizontally. Its unique patented double locking system insures they will stay put and never fall out even after repetitive use or relocation. Strong enough to securely hold even heavy oversized hand power tools. 2-year limited warranty.

For use when replacing track sections Item#s 105003 and 105004. U.S.A. 5/8in. shoulder bolt

3M disposable E-A-R Plugs are the worlds #1 selling hearing protector. Soft foam gently fills ear canal for custom fit. Storage container keeps plugs clean when not in use. NRR 29dB. U.S.A. Hearing Protector Type: Earplugs, Noise Reduction Rating (NRR) (dB): 29, Adjustable Fit: One size fits all, AM/FM Radio: No, Pairs (qty.): 4, Disposable: Yes, Battery Required: No, Case Included: No

The #1 reusable earplug in the world! Triple flange design allows for a comfortable, snug fit. Cord reduces the chance of earplugs falling into the work area. NRR 21dB. U.S.A. Hearing Protector Type: Earplugs, Noise Reduction Rating (NRR) (dB): 21, Adjustable Fit: One size fits all, AM/FM Radio: No, Pairs (qty.): 1, Disposable: No, Battery Required: No, Case Included: Yes

6-pt. chrome vanadium 1/4in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 1/4, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 5/16in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 5/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 3/8in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 3/8, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 7/16in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 7/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 1/2in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 1/2, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 9/16in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 9/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 5/8in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 5/8, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 11/16in. SAE socket. 3/8in. drive Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 11/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 8mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 8, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 9mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 9, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 10mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 10, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 11mm standard socket. /8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 11, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 12mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 12, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 13mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 13, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 14mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 14, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

Connecting Link For #35 Chain Application: Connecting link, Chain Size: #35, Chain Pitch (in.): 3/8, Distance Between Inner Plates (in.): 3/16, Overall Width (in.): 0.514, Pin Diameter (in.): 0.141, Roller Diameter (in.): 0.200, Tensile Strength (lbs.): 2,300

Connecting Link for Drive Chain #13651. Application: Connecting link, Chain Size: #41, Chain Pitch (in.): 1/2, Distance Between Inner Plates (in.): 1/4, Overall Width (in.): 0.573, Pin Diameter (in.): 0.141, Roller Diameter (in.): 0.306, Tensile Strength (lbs.): 2,000

Fits #40 chain Application: Connecting link, Chain Size: #40, Chain Pitch (in.): 1/2, Distance Between Inner Plates (in.): 5/16, Overall Width (in.): 0.703, Pin Diameter (in.): 0.156, Roller Diameter (in.): 0.312, Tensile Strength (lbs.): 3,700, Weight (lbs. per ft.): 0.42

4 1/2in. diameter rubber wheel with 7/8in. arbor for use with Northern Industrial grinder #143378. Wheel Diameter (in.): 4 1/2

Small reinforced fastcut cut-off blades for masonry and metal. Wheel Diameter (in.): 4, Wheel Thickness (in.): 1/8, Arbor Size (in.): 3/8, Max. RPM: 15,280, Wheels (qty.): 1, Wheel Type: A36-T metal, Recommended Use: Metal, masonry

UV resistant makes them ideal for use outdoors. Length (in.): 4, Pieces (qty.): 100, Dimensions L (in.) x W (mm): 4 x 2.5

This 1in. fountainhead creates a lovely bell pattern spray in your pond. Hardware Type: Fountainhead, Pattern Design: Bell, Outlet Diameter (in.): 1, Valve Type: Fits 1in. diverter valves

This Northern Industrial 3/8in.-drive standard socket is made of chrome vanadium steel. Drive (in.): 3/8, Point Size (qty.): 12, Metric Socket Size (mm): 22, Material Type: Chrome vanadium steel, Standard: Yes

This Northern Industrial 3/8in.-drive standard socket is made of chrome vanadium steel. Drive (in.): 3/8, Point Size (qty.): 12, Metric Socket Size (mm): 20, Material Type: Chrome vanadium steel, Standard: Yes

This handheld LED flashlight is handy for use at night. Features a pistol grip and comes with batteries. Overall Length (in.): 5, Bulb Type: LED, Bulbs (qty.): 1, Bulb Life (hrs.): 10,000+, Full Load Run Time (Hours): 10, Battery Included: Yes, 2 AA, Battery Type: AA, Includes (qty.): 1 Not related to WELBILT® products of Enodis companies

6-pt. chrome vanadium 19mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 19, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 20mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 20, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 21mm standard socket. 3/8in. drive Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 21, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 22mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 22, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 3/4in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 3/4, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 13/16in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 3/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 7/8in. SAE socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, SAE Socket Size (in.): 7/8, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 7/16in. SAE standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, SAE Socket Size (in.): 7/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 1/2in. SAE standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, SAE Socket Size (in.): 1/2, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 9/16in. SAE standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, SAE Socket Size (in.): 9/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 5/8in. SAE standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, SAE Socket Size (in.): 5/8, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 11/16in. SAE standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, SAE Socket Size (in.): 11/16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 13mm standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, Metric Socket Size (mm): 13, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 12mm standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, Metric Socket Size (mm): 12, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 14mm standard socket. 1/2in. drive. Drive (in.): 1/2, Point Size (qty.): 6, Metric Socket Size (mm): 14, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 15mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 15, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 16mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 16, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

6-pt. chrome vanadium 18mm standard socket. 3/8in. drive. Drive (in.): 3/8, Point Size (qty.): 6, Metric Socket Size (mm): 18, Material Type: Chrome Vanadium, Standard: Yes Fully chamfered on both ends to accept drive tools and fasteners easily Cold formed for consistent dimensions and greater strength Nickel-chrome finish for corrosion resistance Meets or exceeds ANSI and DIN specifications

Poly/cotton glove with honeycomb PVC grip on both sides for ultimate grip and durability. Reversible, fits either hand. Elastic knit wrist. For general cleaning, material handling and painting. Size: L, Color: Orange, Material: String knit poly/cotton, Cuff Material: Elastic knit, Palm Material: PVC, Pairs (qty.): 1

Yellow chore gloves have comfortable knit wrist. Soft cotton lining. For general-purpose maintenance, roofing, carpentry and agriculture. Large size. Size: L, Color: Yellow, Material: Cotton, Lining: Cotton, Cuff Material: Knit, Pairs (qty.): 1

Economy glove has latex-coated palm and fingertips for grip. Seamless string knit prevents blisters. Elastic knit wrist. For general cleaning, material handling and painting. Disposable. Large size. Size: L, Color: Blue, white, Material: String knit, Cuff Material: Elastic knit, Palm Material: Latex coated, Pairs (qty.): 1

Norwesco Polypropylene Hose Barb has a recommended operating pressure of 100 PSI @ 0°F; 125 PSI @ 70°F; and 70 PSI @ 150°F. Hose Diameter (in.): 1/2, Connector Type: Hose barb, Thread Style: Male thread/hose barb, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 100 at 0°F, 125 at 70°F, 70 at 150°F

Norwesco Polypropylene Hose Barb has a recommended operating pressure of 100 PSI @ 0°F; 125 PSI @ 70°F; 70 PSI @ 150°F. Hose Diameter (in.): 3/4, Connector Type: Hose barb, Thread Style: Male thread/hose barb, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 100 at 0°F, 125 at 70°F, 70 at 150°F

Norwesco Polypropylene Hose Barb has a recommended operating pressure of 100 PSI @ 0°F; 125 PSI @ 70°F; 70 PSI @ 150°F. Hose Diameter (in.): 1, Connector Type: Hose barb, Thread Style: Male thread/hose barb, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 100 at 0°F, 125 at 70°F, 70 at 150°F

Standard with EPDM gaskets. Interchangeable with other couplings and adapters. Manufactured from glass reinforced polypropylene. Hose Diameter (in.): 1 x 3/4, Connector Type: Reducer nipple, Thread Style: Male thread/male thread, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 120 at 0°F, 150 at 70°F, 90 at 150°F

Standard with EPDM gaskets. Interchangeable with other couplings and adapters. Manufactured from glass reinforced polypropylene. Hose Diameter (in.): 1 1/4 x 3/4, Connector Type: Reducer nipple, Thread Style: Male thread/male thread, Material Type: Glass reinforced polypropylene, Working Pressure (PSI): 120 at 0°F, 150 at 70°F, 90 at 150°F

Precise double-cut file pattern quickly cleans ignition points. Plus, this unique tool doubles as a light-duty general-purpose file. Constructed of high-grade steel.

Complete tune-up feeler gauge has nine 2in. straight blades for measuring thickness plus six 1in. flat blades for gauging spark plug gaps. In both decimal and metric sizes. Includes 2in. steel ruler and electrode adjuster. 9 straight blades, 2in. in length: .002in. (.05mm), .010in. (.25mm), .003in. (.08mm), .015in. (.38mm), .004in. (.10mm), .020in. (.50mm), .006in. (.15mm), .025in. (.63mm), .008in. (.20mm) 6 flat blades, 1in. in length: .020in. (.50mm), .030in. (0.75mm), .025in. (.64mm), .035in. (0.88mm), .028in. (.70mm), .040in. (1.02mm)

Spark plug gauge measures electrode gap on plugs from .020 to .040 inches (0.50 to 1mm). Includes electrode adjusting tool.

Ultimate weather protection. Woven strands coated on each side ensure a long, durable life. Dimensions L x H ( ft.): 5 x 7, Color: Blue, Material Type: Polyethylene, Water Resistant: Yes, Mildew Resistant: Yes Not related to WELBILT® products of Enodis companies

Lasts up to 6 times longer than conventional discs! Aggressively grinds and cuts stainless steel and other alloys. For use on right angle grinders. Wheels (qty.): 1, Wheel Diameter (in.): 4 1/2, Wheel Thickness (in.): 1/8, Arbor Size (in.): 7/8, Recommended Use: Metal

The Diablo® blade for metal cutting combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Blade Application: Metal, Blade Size (in.): 9, TPI (Teeth per Inch): 14/24, Blade Material: Bi-metal, Blades (qty.): 1 9in., 14/24 TPI

One each: Pony hair round #2 and #4; Pony hair flat 1/4in. and 1/2in.; black bristle flat 1/2in. All with wooden handles. Brush Diameter (in.): Various Sizes, Brushes (qty.): 5, Handle Type: Wood

2-pc. Channel Latch magnet — 7-lb. pull each. 1in.L x 7/8in.W x 7/32in. thick with .195in. hole. A strong ceramic magnet fixed into a zinc plated steel channel to form a latch magnet assembly with holding power on one large surface. Used mainly as a door latch, it can also be used to hold nameplates, fixtures or other ferrous metal objects. Under normal use permanent magnetism guaranteed, Highly resistant to heat. NOTE: Pounds pull is rated by vertical test on 3/8in. thick ground steel plate. Pounds pull rating will be reduced if the item you wish to lift is thinner, painted, or an uneven surface. Product Style: Holding magnet, Material: Ceramic, Pulling Power (lbs.): 7, Thickness (in.): 7/32, Dimensions L x W (in.): 1 x 7/8

2-pc. ceramic block magnet set. Each measures 1 7/8in.L x 7/8in.W x 3/8in. thick. Also known as a ferrite magnet, this powerful magnet can be used to hang polaroids of projects in process on the lip of a metal shelf above a workbench, or to pin blueprints onto the side or hood of a vehicle. These magnets are highly resistant to demagnetization, and have excellent resistance to corrosion. Product Style: Holding magnet, Material: Ceramic, Thickness (in.): 3/8, Dimensions L x W (in.): 1 7/8 x 7/8

Round base magnet — 15-lb. pull 1 7/16in. dia. x 1/4in. thick with a 3/16in. hole. This magnetic base has a powerful ceramic ring magnet encased in a durable nickel-plated cup with a mounting hole in the center. Add a hook or knob and this magnet is perfect for holding wiring or cords in place. It will hold up to 15 pounds. Highly resistant to heat. Under normal use, permanent magnetism guaranteed. NOTE: Pounds pull is rated by vertical test on 3/8in. thick ground steel plate. Pounds pull rating will be reduced if the item you wish to lift is thinner, painted, or an uneven surface. Product Style: Holding magnet, Material: Ceramic ring encased in durable nickel plated cup, Pulling Power (lbs.): 15, Thickness (in.): 1/4, Diameter (in.): 1 7/16

Type 27 Raised Hub. Made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops. Aluminum oxide is recommended for all types of ferrous metals. Wheel dimensions are diameter x thickness x arbor. Wheels (qty.): 1, Wheel Diameter (in.): 4, Wheel Thickness (in.): 1/4, Arbor Size (in.): 5/8, Max. RPM: 13,500, Wheel Type: Type 27, Recommended Use: Metal

Norton 6 1/2in. Circular Saw Reinforced Cutoff Blade (Type 1) is the most popular cutoff application for deburring, cleaning, slotting and cutting roof decking and all types of metal, including sheet metal, steel rods and angle iron. Wheel Diameter (in.): 6 1/2, Wheel Thickness (in.): 1/2, Max. RPM: 9,405, Wheels (qty.): 1, Wheel Type: 1, right angle, Recommended Use: Metal, masonry

Norton 7in. Circular Saw Reinforced Cutoff Blade (Type 1) is the most popular cutoff application for deburring, cleaning, slotting and cutting roof decking and all types of metal, including sheet metal, steel rods and angle iron. Wheel Diameter (in.): 7, Wheel Thickness (in.): 1/8, Max. RPM: 8,730, Wheels (qty.): 1, Wheel Type: 1, Recommended Use: Metal, masonry

For use with right angle grinders in metal-grinding applications. 4 1/2in. x 1/4in. x 7/8in. Wheels (qty.): 1, Wheel Diameter (in.): 4 1/2, Wheel Thickness (in.): 1/4, Arbor Size (in.): 7/8, Wheel Type: Type 27, Recommended Use: Metal

Type 27 Raised Hub. Made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops. Aluminum oxide is recommended for all types of ferrous metals. Wheel dimensions are diameter x thickness x arbor. Wheels (qty.): 1, Wheel Diameter (in.): 4 1/2, Wheel Thickness (in.): 1/4, Arbor Size (in.): 7/8, Max. RPM: 12,000, Wheel Type: Type 27, Recommended Use: Metal

For use with right angle grinders in grinding all types of metal. 4in. x 1/4in. x 5/8in. Wheels (qty.): 1, Wheel Diameter (in.): 4, Wheel Thickness (in.): 1/4, Arbor Size (in.): 5/8, Wheel Type: Type 27, Recommended Use: Metal

Hubless Grinding Wheel. Made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops. Aluminum oxide is recommended for all types of ferrous metals. Wheel dimensions are diameter x thickness x arbor. Wheels (qty.): 1, Wheel Diameter (in.): 7, Wheel Thickness (in.): 1/4, Arbor Size (in.): 7/8, Max. RPM: 8,500, Recommended Use: Metal

Type 27 Raised Hub. Made for a wide range of grinding, shaping and cutting jobs in home workshops, farms and machine shops. Aluminum oxide is recommended for all types of ferrous metals. Wheels (qty.): 1, Wheel Diameter (in.): 4, Wheel Thickness (in.): 1/8, Arbor Size (in.): 5/8, Max. RPM: 13,500, Wheel Type: Type 27, Recommended Use: Metal

3 1/2in. cuffs. Leather strengthens areas where you need it most — your palms, fingertips, index fingers and knuckles. Welting in heavy wear areas. Gunn cut. 3-1/2in. cuffs guard your wrists. Size: L, Material: Leather, Pairs (qty.): 1

PVC protects from liquids, oils, grease and solvents. Long gauntlet cuff protects arm. Smooth high-grip finish. Soft interlock lining. For maintenance, refining, handling grease, oils, acids, caustics and alcohol. Large. Size: Large, Color: Black, Material: PVC coated 18&Quot; PVC-Coated Gloves

Right-angle cutoff blade. Wheel Diameter (in.): 6, Wheel Thickness (in.): 3/64, Arbor Size (in.): 7/8, Wheels (qty.): 1, Wheel Type: 1, right angle

Nonmarking, 3in. diameter rubber bumper protects walls and help cushion impact. For use with casters on Wire Shelving Systems and Mobile Utility Carts.

Polyethylene tarp is water-resistant and wont rot or mildew. 2-oz. per sq. yd., 7 x 7 mesh. UV resistant. Rope reinforced edges for extra strength. Heavy-duty rust-resistant aluminum grommets at corners and approx. every 3 feet along all 4 edges. Dimensions L x H ( ft.): 6 x 8, Color: Blue, Material Type: Polyethylene, Water Resistant: Yes, Mildew Resistant: Yes, UV Inhibitors: Yes, Grommet Material: Aluminum, Grommet Spacing (ft.): 3 Not related to WELBILT® products of Enodis companies

Chrome-plated heavy duty steel with black rubber tip and grip. Tool Length (in.): 6, Pieces (qty.): 1, Material Type: Steel, Handle Type: Rubber grip Not related to WELBILT® products of Enodis companies

Includes: (1) Grommet Grommet Only for Kit 127856

Connecting Link for Drive Chain # 13653. Application: Connecting link, Chain Size: #420, Chain Pitch (in.): 1/2, Distance Between Inner Plates (in.): 1/4, Pin Diameter (in.): 0.156, Roller Diameter (in.): 0.306, Tensile Strength (lbs.): 3,700

Hardened and plated steel. Inlet Size (in.): 1/4, Material: Steel

For use with Item# 157797. Wheels (qty.): 1, Wheel Diameter (in.): 2, Arbor Size (in.): 3/8

4 1/2in. diameter wire wheel with 5/8in. arbor for use with Northern Industrial grinder #143378. Wheel Diameter (in.): 4 1/2

4 1/2in. diameter wheels with 7/8in. arbor for use with Northern Industrial grinder #143378. Wheel Diameter (in.): 4 1/2 2 wheels: one for cutting (4 1/2in. x 7/8in. x 15/64in) and one for grinding (4 1/2in. x 7/8in. x 1/8in) 5 sanding discs: 40 grit, 60 grit, 80 grit, (2) 100 grit

Choose your blade for cleaning, slotting and cutting of all types of metal and masonry. Wheel Diameter (in.): 4, Wheel Thickness (in.): 1/16, Arbor Size (in.): 5/8, Max. RPM: 15,280, Wheels (qty.): 1, Recommended Use: Metal, masonary Cut pipe, sheet metal and auto body panels, studs, angle iron and tubing Unique reinforced design for strength 1/16in. for quick, clean cutting 4in. blades for Black & Decker®, Hitachi®, Jepson®, Makita® and Ryobi® right angle grinders 5/8in. arbor hole 15,280 maximum RPM.

Choose your blade for cleaning, slotting and cutting of all types of metal and masonry. Wheel Diameter (in.): 4, Wheel Thickness (in.): 1/16, Arbor Size (in.): 5/8, Max. RPM: 15,280, Wheels (qty.): 1, Recommended Use: Metal, masonry Cut pipe, sheet metal and autobody panels, studs, angle iron and tubing Unique reinforced design for strength 1/16in. thin for quick, clean cutting 4in. blades for Black & Decker® Hitachi®, Jepson®, Makita® and Ryobi® right angle grinders 5/8in. arbor hole 15,280 maximum RPM

Type 27 Raised Hub. Made for a wide range of grinding, shaping and cutting jobs in home workshops, farms, and machine shops. Aluminum oxide is recommended for all types of ferrous metals. Wheel dimensions are diameter x thickness x arbor. Wheels (qty.): 1, Wheel Diameter (in.): 4 1/2, Wheel Thickness (in.): 1/4, Arbor Size (in.): 7/8, Max. RPM: 12,000, Wheel Type: Type 27, Recommended Use: Masonry

Nylon cable ties in a pack of 100. Each is 5in. long in white. Great for hundreds of uses, including electrical, home, garden, auto and marine. Length (in.): 5, Pieces (qty.): 100, Material: Nylon

Replacement hammer springs for 5-pc. air hammer kit, Item# 139273 and air hammer combo, Item# 1411202. Pack of 2. Fits Item#s 139273 and 1411202 Pack of 2

UV resistant makes them ideal for use outdoors. Length (in.): 5, Pieces (qty.): 100, Dimensions L (in.) x W (mm): 5 x 3.3

Wraparound design with adjustable black temples. Frame-free with clear lenses. DXTM antifog hard coat. 99.9% UV protection. Meets ANSI Z87.1-1989 and CSA Z94.3. U.S.A. Eyewear Type: Safety glasses, Adjustable Frame: Yes, Nose Piece: Hard, Frame Color: Black, Lens Color: Clear, Indoor/Outdoor Use: Yes, UV/IR Coated Lens: Yes, Anti-Fog Lens: Yes, Case Included: No

Perfect for removing stickers, paint, caulk and more from windows, windshields and other glass. Includes 5 extra blades, which store conveniently in the handle. Pieces (qty.): 1, Tool Length (in.): 12, Blades (qty.): 5, Blade Type: Razor

This 1in. fountain nozzle creates a decorative multi-tiered cascade pattern in your pond. Hardware Type: Fountainhead, Pattern Design: Cascade, Outlet Diameter (in.): 1, Valve Type: Fits 1in. diverter valves

The Diablo® blade for wood and nail-embedded wood combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Nail embedded wood and wood, Blade Size (in.): 9, TPI (Teeth per Inch): 6/12, Blade Material: Bi-metal, Blades (qty.): 1 9in., 6/12 TPI

The Diablo® blade for wood and nail-embedded wood and metal combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Nail embedded wood and metal, Blade Size (in.): 9, TPI (Teeth per Inch): 18/14, Blade Material: Bi-metal, Blades (qty.): 1 9in., 18/14 TPI

The Diablo® blade for wood and nail-embedded wood combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Nail embedded wood and wood, Blade Size (in.): 9, TPI (Teeth per Inch): 6/12, Blade Material: Bi-metal, Blades (qty.): 1 9in., 6/12 TPI

High quality NorthStar® plugs are made in U.S.A. Inlet Size (in.): 1/4, Max. PSI: 5,200, GPM: 6, Material: Steel Replacement parts are available through Northern Tool Parts Department 1-800-270-0810

Use the NorthStar® Pressure Washer Nipple to convert a female fitting into a male fitting. Made of plated steel. 4000 maximum PSI. Female Inlet (in.): 3/8, Max. PSI: 4,000, Material: Plated steel Replacement parts are available through Northern Tool Parts Department 1-800-270-0810

8-pc. ceramic disc magnet set. Each measures 3/4in. dia. x 3/16in. thick. Also known as ferrite magnets, these powerful discs are made from the highest grade of ceramic material available, giving them unbeatable pull strength. These magnets are highly resistant to demagnetization, and have excellent resistance to corrosion. This magnet can be attached to a medium-weight project using most types of adhesive. Place this magnet in a hydraulic oil reservoir or oil sump to collect metal shavings. Product Style: Holding magnet, Material: Ceramic, Thickness (in.): 3/16, Diameter (in.): 3/4

6-pc. ceramic disc magnet set. Each measures 1in. dia. x 5/32in. thick. Also known as ferrite magnets, these powerful discs are idea for medium-weight projects. They are made from the highest grade of ceramic magnet material available, giving them unbeatable pull strength, and are ideal for all types of projects around the house, office, shop or garage. These magnets are highly resistant to demagnetization, and have excellent resistance to corrosion. Product Style: Holding magnet, Material: Ceramic, Thickness (in.): 5/32, Diameter (in.): 1

Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. Clevis Type: Straight, Clevis Pin Type: Screw, Usable Length (in.): 1 1/4, Pin Diameter (in.): 3/8, Clevis Body Diameter (in.): 5/16, Working Load (lbs.): 2,000

Trigger sprayer is ideal for light-duty spraying. 32-oz. capacity. Sprayer Type: Handheld, Tank Size (gal.): 1/4, Spray Pattern: Con, Pump Type: Compression, Wand Length (in.): 18, Seal Type: Viton, Dimensions L x W x H (in.): 5 x 5 x 10 Adjusts from very fine mist to long-range stream Comfort grip trigger Supply tube filter

U.S.A. Bin Type: Dividable Grid Containers, Dividers (qty.): 1, Compatible With Item Number (s): 278604 Long divider

U.S.A. Bin Type: Dividable Grid Containers, Dividers (qty.): 1, Compatible With Item Number (s): 278604 Short divider

U.S.A. Bin Type: Dividable Grid Containers, Dividers (qty.): 1, Compatible With Item Number (s): 278605 Short divider

U.S.A. Bin Type: Dividable Grid Containers, Dividers (qty.): 1, Compatible With Item Number (s): 278606 Long divider

U.S.A. Bin Type: Dividable Grid Containers, Dividers (qty.): 1, Compatible With Item Number (s): 278606 Short divider

U.S.A. Bin Type: Dividable Grid Containers, Dividers (qty.): 1, Compatible With Item Number (s): 278608 Short divider

Boom nozzle, fits Item# 2824. Application: Nozzle

U.S.A. Bin Type: Dividable Grid Containers, Dividers (qty.): 1, Compatible With Item Number (s): 278608 Long divider

1/2in. hitch pin fits 1 1/4in. receiver tube. Zinc plated steel. Includes hair pin cotter. Fits Receivers (in.): 1 1/4, Material: Zinc plated steel, Diameter (in.): 1/2, Includes (qty.): 1

The quickest and easiest way to connect your high pressure hose to your pump and gun. Coupler pushes onto nipple in one easy motion. 4000 PSI. Nipple. Plated Steel. Inlet Size (in.): 3/8, Max. PSI: 4,000, Material: Steel Replacement parts are available through Northern Tool Parts Department 1-800-270-0810

The quickest and easiest way to connect your high pressure hose to your pump and gun. Coupler pushes onto nipple in one easy motion. Female Inlet (in.): 3/8, Max. PSI: 4,000, Material: Plated steel Replacement parts are available through Northern Tool Parts Department 1-800-270-0810

Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. Clevis Type: Straight, Clevis Pin Type: Screw, Usable Length (in.): 1 7/16, Pin Diameter (in.): 7/16, Clevis Body Diameter (in.): 3/8, Working Load (lbs.): 3,000

Cleaning and polishing compound is designed for a variety of applications, from heavy-duty cleaning to light polishing. For use on hard metals, soft metals or precious metals. Recommended Use: High gloss cleaning, Material Type: Hard, soft, & precious metals, Includes (qty.): 1

For securely lashing loads to a trailer, boat or truck bed. Zinc-plated for corrosion resistance. Diameter (in.): 1/4, Working Load (lbs.): 1,000, Breaking Strength (lbs.): 3,000 Plastic pan

For securely lashing loads to a trailer, boat or truck bed. Zinc-plated for corrosion resistance. Diameter (in.): 1/4, Working Load (lbs.): 265, Breaking Strength (lbs.): 800 Surface mounted pan with 1/4in. dia. ring

For securely lashing loads to a trailer, boat or truck bed. Zinc-plated for corrosion resistance. Surface mount use plastic bezel with recessed pan to form a surface mount rope ring. Recessed mount use pan without bezel (requires 3in. dia. mounting hole in 1/4in. or thicker material). Working Load (lbs.): 500, Breaking Strength (lbs.): 1,500 Plastic bezel for surface mount

For securely lashing loads to a trailer, boat or truck bed. Zinc-plated for corrosion resistance. Working Load (lbs.): 265, Breaking Strength (lbs.): 800 Requires 3in. dia. mounting hole in 1/4in. or thicker material

This water-resistant, fadeproof and nontoxic permanent marker features a tip that lasts 50% longer than a standard Sharpie Chisel tip. Quick-drying ink is ideal for wet, oily and other hard-to-mark surfaces. U.S.A. Color: Black, Tip Type: Chisel, Water Resistant: Yes, Includes (qty.): (1) Marker

This handy roll of Gorilla tape has the same tough, thick, moisture-resistant adhesive outer shells as the larger 35-yd. rolls. Great for rough, uneven surfaces like wood, concrete, stone, stucco, plaster, brick and more. U.S.A. Tape Type: Gorilla tape, Length (ft.): 30, Max. Width (in.): 1, Includes (qty.): (1) Roll

Razor thin .045 (3/64in.) profile makes this the fastest cutting choice for metal, stainless and alloys. U.S.A. Wheel Diameter (in.): 4 1/2, Wheel Thickness (in.): 3/64, Arbor Size (in.): 7/8, Wheels (qty.): 1, Wheel Type: 1, Recommended Use: Metal, stainless, slloys Unmatched wheel life for any product in its class Fully reinforced

PTO Stabilizer Pin Stub — 2 5/8in. Length Hitch Type: 3-point, Category Type: 1, Overall Length (in.): 2 5/8, Usable Length (in.): 3/8, Pin Diameter (in.): 7/8, Thread Diameter (in.): 5/8

Toplink Pin — Category 1, 5 1/2in. Length Hitch Type: 3-point, Category Type: 1, Overall Length (in.): 5 1/2, Usable Length (in.): 3 7/8, Pin Diameter (in.): 3/4

Includes 2 gaskets per pack. Hose Diameter (in.): 1 1/4, Connector Type: Gasket, Thread Style: Smooth Hole Size: 1 1/4in.

Includes 2 gaskets per pack. Hose Diameter (in.): 1 1/2, Connector Type: Gasket, Thread Style: Smooth Hole Size: 1 1/2in.

Combination wrench features chrome vanadium steel heat-treated for strength, toughness, and resistance to wear and fatigue. In mirror finish. Pieces (qty.): 1, SAE Size(s) (in.): 1/4, Material Type: Chrome vanadium steel, Finish Type: Mirror

8mm chrome vanadium combination wrench with mirror finish. Pieces (qty.): 1, Metric Size(s) (mm): 8, Material Type: Chrome vanadium steel, Finish Type: Mirror