For remote drilling in metal, the 4270-20 is a great choice. It can drill up to 1 1/2in. diameter holes through 2in. thick steel with annular cutters, or 1/2in. diameter holes 4 1/4in. deep with twist drill bits. The tool is setup to accept standard 3/4in. Weldon shank cutters. USA. HP: 1.1, Volts: 120, Amps: 9.0, Speed (RPM): 450, Drilling Capacity (in.): 2, Chuck Size (in.): 3/4 Powerful 9.0 Amp motor The strong two-coil magnet provides 2300 lbs. of deadlift force on 1in. thick steel Simple two-button control panel is located on the back, away from feed handle obstruction Feed handle can be conveniently relocated to the opposite side without the use of tools High-strength two-coil magnet 750 lbs. drill point pressure 6.6in. drill travel 8ft. fixed cord

This Makita 18V LXT Lithium-Ion cordless 6-pc. combo kit includes a hammer drill-driver, circular saw, recip saw, impact driver, cutoff/angle grinder and flashlight. 2-speed 1/2in. Hammer Driver-Drill (0–400 / 0–1500 RPM) with Makita-built 4-pole motor delivers 450 in.-lbs. of Max Torque and weighs only 4.2 lbs. Variable speed Impact Driver (0–2300 RPM) provides 1330 in.-lbs. of Max Torque in a compact design and weighs only 3.4 lbs. Reciprocating Saw provides 0–2900 SPM with tool-less blade changes & shoe adjustments and weighs only 7.7 lbs. 6 1/2in. Circular Saw delivers 3700 RPM for faster cutting and ripping through wood and weighs only 6.9 lbs. 4 1/2in. Cut-Off/Angle Grinder produces an impressive 10,000 RPM and weighs only 5.3 lbs. 4-position Flashlight with Xenon bulb runs over 4 hours per charge. LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5X more cycles. Makita Lithium-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power). 30-minute Rapid Optimum Charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Charger also has a built-in fan to cool the battery which helps produce more lifetime work. Tools Included: 6: hammer driver-drill, circular saw, reciprocating saw, impact driver, cutoff/angle grinder, flashlight, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-Ion, Battery Included: Yes (2), Charger Included: Yes Charger earned the ENERGY STAR® label for meeting the strict energy-efficient guidelines set by the EPA and DOE

Sharpen the most common drill bits in under a minute using an easy 3-step sharpening system that makes everyone a drill sharpening expert. The Darex V390 sharpens drill bits 1/8in.-3/4in. (3-19mm) and 118° to 140° with ease. U.S.A. Bit Sizes (SAE): 1/8 to 3/4, Bit Sizes (mm): 3 to 19, Angle Sharpening (deg.): 118 to 140, Cobalt Bits: Yes Includes an adjustable split-point feature and relief control for greater point style variation Recommended for light duty — 35-50 drills per week Comes standard with Borazon wheel for HSS and cobalt drill bits Optional diamond wheels for carbide bits sold separately

The Makita® 7-Pc. LXT Combo Kit includes the 1/2in. Hammer Driver-Drill (BHP452), 6 1/2in. Circular Saw (BSS611), Reciprocating Saw (BJR182), Impact Driver (BTD141), 4 1/2in. Cutoff/Angle Grinder (BGA452), Flashlight (BML185) and Jobsite Radio (BMR100W). LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5x more cycles. Makita Li-Ion battery provides longer run time, 5X lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power). U.S.A. Tools Included: Hammer drill-driver, Circular saw, Recip saw, Impact driver, Cutoff/angle grinder, Flashlight, Jobsite radio, Storage Case Included: Yes, Volts: 18, Battery Type: Li-Ion, Battery Included: Yes (2), Charger Included: Yes 30-Minute Rapid Optimum Charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature 30-Minute Rapid Optimum Charger has a built-in fan to cool the battery which helps produce more lifetime work

This Makita 18V lithium-ion combo tool kit includes a wide variety of high-quality tools, all powered with versatile, high-powered battery packs that provide superior performance. U.S.A. Tools Included: Hammer drill/driver, circular saw, cutoff angle grinder, reciprocating saw, impact driver, impact wrench, rotary hammer, Battery Type: LXT lithium-ion 3.0Ah, Battery Included: Yes, Charger Included: Yes LXT lithium-ion batteries and optimum charging system produce up to 430% total lifetime work with 2.5x more cycles than other batteries 30-minute Rapid Optimum Charger technology actively controls current, voltage and temperature 1/2in. hammer drill/driver with 4-pole motor delivers 450 in.-lbs. of torque 6 1/2in. circular saw with high torque motor delivers maximum power for cutting 2x material at 45° 4 1/2in. cutoff/angle grinder produces impressive 10,000 RPM for faster grinding Reciprocating saw features tool-free blade changes and shoe adjustments Impact driver provides 1330 in.-lbs. of torque, 3200 IPM 1/2in. impact wrench delivers 170 ft.-lbs. of torque and 3000 IPM 7/8in. SDS-plus rotary hammer features rotation, hammering or hammering and rotation modes 4-position flashlight with xenon bulbs runs over 4 hours AM/FM jobsite radio includes 10 preset buttons and MP3 compatibility Set includes 2 LXT lithium-ion, 3.0Ah batteries, 30-minute charger, wheeled contractor bag with telescoping handle

Universal Chuck Key Holder Chuck Key Type: Universal

The Diablo® blade for wood and nail-embedded wood combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Nail-embedded wood and wood, Blade Size (in.): 6, TPI (Teeth per Inch): 6/12, Blade Material: Bi-metal, Blades (qty.): 1 6in., 6/12 TPI

The Diablo® blade for metal cutting combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Metal, Blade Size (in.): 6, TPI (Teeth per Inch): 10/18, Blade Material: Bi-metal, Blades (qty.): 1 6in., 10/18 TPI

The JET manual ferrous cold saw uses a 275mm blade to cut through solid steel. With a powerful 1.5 HP electric motor and 2 cutting speeds (54 & 108 RPM), the saw is ideal for cutting pipes and bars and is also capable of slotting. HP: 1.5, Dimensions L x W x H (in.): 27 x 25 x 61 Cast dual pivot saw head Cuts 1 3/8in. round solid steel @ 90° Cuts 3 1/32in. x 2in. rectangle solid steel @ 90° Cuts 2 1/2in. square solid steel @ 90° Cuts 3 1/8in. round steel tubing @ 90° Cuts 2 3/8in. square steel tubing @ 90° Powered by 1.5 HP 220V 3-phase motor Flood-style coolant system with 1 1/2-gallon tank Hardened and ground worm and wheel gearbox Heavy-duty cast iron frame base 30in. material length stop Safety guards 27in.L x 25in.W x 61in.W overall

The versatility of this Electric Eel Sectional Drain Cleaning Machine is exceptional. The higher RPM offers better cleaning power for tough stoppages, such as roots and compacted debris. Sectional cables are economical and can be replaced at any time. One-person operation means less time and labor expense. U.S.A. Speed (RPM): 500, HP: 1/2, Cable Size Diameter x L (in. x ft.): (13) 8ft Sections, Clearing Diameter (in.): 3 - 10, Clearing Distance (ft.): 200, Power Cord (ft.): 20, Cart: Yes 13 self-feeding 8ft. dual cables (104-ft. total) Fully adjustable safety clutch provides overload protection Rugged, cast aluminum base Fold-down handle for easy transportation and storage Set of 7 cleaning tools Feeding tool for negotiating &Quot;P&Quot; traps Spanner wrench for disconnecting cables and tools

4 1/2in. diameter rubber wheel with 7/8in. arbor for use with Northern Industrial grinder #143378. Wheel Diameter (in.): 4 1/2

The Diablo® blade for metal cutting combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Blade Application: Metal, Blade Size (in.): 9, TPI (Teeth per Inch): 14/24, Blade Material: Bi-metal, Blades (qty.): 1 9in., 14/24 TPI

1/2in. Chuck Key with 9/32in. pilot. Drive (in.): 1/2, Pilot (in.): 9/32, Chuck Key Type: Straight

1/4in. and 3/8in. Chuck Key with 1/4in. pilot. Drive (in.): 3/8, Pilot (in.): 1/4, Chuck Key Type: Straight

4 1/2in. diameter wire wheel with 5/8in. arbor for use with Northern Industrial grinder #143378. Wheel Diameter (in.): 4 1/2

4 1/2in. diameter wheels with 7/8in. arbor for use with Northern Industrial grinder #143378. Wheel Diameter (in.): 4 1/2 2 wheels: one for cutting (4 1/2in. x 7/8in. x 15/64in) and one for grinding (4 1/2in. x 7/8in. x 1/8in) 5 sanding discs: 40 grit, 60 grit, 80 grit, (2) 100 grit

The Diablo® blade for wood and nail-embedded wood combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Nail-embedded wood and wood, Blade Size (in.): 9, TPI (Teeth per Inch): 6/12, Blade Material: Bi-metal, Blades (qty.): 1 9in., 6/12 TPI

The Diablo® blade for wood and nail-embedded wood and metal combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Nail-embedded wood and metal, Blade Size (in.): 9, TPI (Teeth per Inch): 18/14, Blade Material: Bi-metal, Blades (qty.): 1 9in., 18/14 TPI

The Diablo® blade for wood and nail-embedded wood combines bi-metal construction with Variable Tooth Technology gives consistently superior cuts, plus up to 2X longer life than standard blades. Special tip design allows for faster and easier plunging in wood. Blade Application: Nail-embedded wood and wood, Blade Size (in.): 9, TPI (Teeth per Inch): 6/12, Blade Material: Bi-metal, Blades (qty.): 1 9in., 6/12 TPI

Cleaning and polishing compound is designed for a variety of applications, from heavy-duty cleaning to light polishing. For use on hard metals, soft metals or precious metals. Recommended Use: High gloss cleaning, Material Type: Hard, soft, & precious metals, Includes (qty.): 1

1/4in. and 3/8in. “L” Chuck Key with 1/4in. pilot. Drive (in.): 3/8, Pilot (in.): 1/4, Chuck Key Type: L

1/4in. Chuck Key with 5/32in. pilot. Drive (in.): 1/4, Pilot (in.): 5/32, Chuck Key Type: Straight

Milwaukee® Shockwave Impact Duty™ Socket Adapters are engineered for extreme durability and up to 10X life. Made from proprietary steel and heat treated to control hardness, the Shockwave Impact Duty socket adapters provide fastening capabilities with all impacts. Broadly targeting cordless users, the Shockwave Impact Duty accessory line is not only ideal for heavy-duty impact applications, but delivers a full system solution for all the users drilling and fastening needs. Adapter Size (in.): 3/8, Driver & Adapter Qty.: 1, Driver / Adapter Material: Steel, Shank Diameter (in.): 1/4, Storage Case Included: No

Works With: Sawzall 1 hex key wrench 1 blade clamp 1 blade clamp screw For use with keyed spindle standard SawzallÆ models Model 49-22-5012 U.S.A.

1/2in. Chuck Key iwth 1/4in. pilot. Drive (in.): 1/2, Pilot (in.): 1/4, Chuck Key Type: Straight

Milwaukee® Shockwave Impact Duty™ Socket Adapters are engineered for extreme durability and up to 10X life. Made from proprietary steel and heat treated to control hardness, the Shockwave Impact Duty socket adapters provide fastening capabilities with all impacts. Broadly targeting cordless users, the Shockwave Impact Duty accessory line is not only ideal for heavy-duty impact applications, but delivers a full system solution for all the users drilling and fastening needs. Adapter Size (in.): 1/2, Driver & Adapter Qty.: 1, Driver / Adapter Material: Steel, Shank Diameter (in.): 1/4, Storage Case Included: No

Get all your buffing and polishing done fast and easy with the power and speed of a bench buffer instead of elbow grease. Flannel is one of the softest buffing materials available, and is ideal where an extremely soft touch is required. Recommended Use: With item# 150607, Material Type: Flannel, Pad Dimension (in.): 6, Includes (qty.): 1 For use with Benchtop Buffer Item# 150607 6in. dia. wheel

The Klutch™ 7in. foam pad works with the Klutch™ Ultimate Car Polisher (Item# 20244, sold separately) to produce a beautiful shine. Recommended Use: With Item# 20244, Material Type: Foam, Pad Dimension (in.): 7, Includes (qty.): 1

The Air Capital 5-Pc. Drill Stop Set features coiled-spring drill stops that can be set to the desired hole depth and that slide over drill bits to prevent over- and under-drilling. Design reduces snapping of bits, damage to drilled material and surface marring by chucks. SAE Size(s) (in.): 3/32, 1/8, 5/32, 3/16, 1/4 Color-coded drill stops Sizes to fit 3/32in., 1/8in., 5/32in., 3/16in. and 1/4in. bits

Get all your buffing and polishing done fast and easy with the power and speed of a bench buffer instead of elbow grease. Flannel is one of the softest buffing materials available, and is ideal where an extremely soft touch is required. Recommended Use: With item# 1506078, Material Type: Flannel, Pad Dimension (in.): 8, Includes (qty.): 1 For use with Benchtop Buffer Item# 1506078 8in. dia. wheel

Professional waffle-pattern foam pad is an ideal replacement pad for the 7in. Sander/Polisher, Item# 399443. Also fits all standard 7in. polishers. Hook-and-loop foam pad is easy to use and runs cooler for superior performance in compounding and polishing applications. Disc Diameter (in.): 7

These Milwaukee cutter wheels are designed for use with the Milwaukee M12 copper tubing cutter (Item#s 247120, 247121 and 24122). Works With: Milwaukee M12 Copper Tubing Cutter, Application: Designed for Cutting Copper Tubing, Wheel Type: Cutter 2-pk.

For use with Item# 155702. 3/4in. x 1 1/2in. shank size. 3in. depth capacity. Chisel Type: Mortising, Bit Diameter (in.): 3/8, Shaft Diameter (in.): 3/4, Reduced Shaft Length (in.): 5 1/2, Reduced Shaft Diameter (in.): 9/32, Depth Capacity (in.): 3, Length of Travel (in.): 2 3/4

6000 max. RPM. 1/4in. shank Shank Diameter (in.): 1/4, File Material: Steel, Tip Shape: Cylindrical, Max. RPM: 6,000, Files (qty.): 1

Titan quick-release bit extension is designed for working in hard-to-reach areas. Pieces (qty.): 1, Extension Length (in.): 6, Magnetic: Yes Internal rotating shaft Allows user to hold the outside of extension to work in confined spaces Low profile auto-locking magnetic chuck Quick-release function for fast bit changes

This 6in. diameter cloth wheel is designed for use with bench buffers, Item#s 150607 and 18651. Recommended Use: Designed for use with #150 & #18651 bench buffers, Material Type: Cloth Construction, Pad Dimension (in.): 6, Includes (qty.): 1

Replacement blades for cutoff saw Item# 338070. 6in. diameter x .07in. thick and 7/8in. arbor. Wheel Diameter (in.): 6, Arbor Size (in.): 7/8

Fast and productive, the auger has wide flutes for fast chip removal and a screw-tip to assist the user in boring fast, clean holes. Diameter (in.): 5/8, Length (in.): 7.5, Twist Length (in.): 4.5 Single-spur design scribes the circumference of the hole first to leave a smoother finish Coarse screw point provides fast boring in both soft and hard woods Precision-ground cutting edge for a longer life Full-length heat treatment guards against bending bit in heavy-duty applications Wide lands keep bit straight as it bores through the hole Model 49910

For use with Item# 155702. Chisel Type: Mortising, Bit Diameter (in.): 1/4, Shaft Diameter (in.): 3/4, Reduced Shaft Length (in.): 4 3/8, Reduced Shaft Diameter (in.): 3/16, Depth Capacity (in.): 1 7/8, Length of Travel (in.): 1 3/4, Overall Length (in.): 7 1/4

6000 max. RPM. 1/4in. shank. Shank Diameter (in.): 1/4, File Material: Steel, Tip Shape: Tree, Max. RPM: 6,000, Files (qty.): 1

The Genesis Wide Flush Cut Blade is designed for use with the Genesis Oscillating Tool (sold separately). Use this blade for plunge cutting and flush cutting in wood, plastic, drywall and other soft materials. Useful for flush cutting door jamb or base molding. Saves time and effort when making wide cuts by eliminating multiple cuts. Blade Type: Wide flush cut, Pieces (qty.): 1, Dimensions L x W x H (in.): 7 x 4 1/2 x 1/2 2 5/8in. (67mm) blade For plunge and flush cutting of wood, plastic and drywall

Grip-On drill bits are constructed of heat-treated steel and have extra-long 25in. shafts for extended reach. Black oxide finish resists corrosion. In 1/8in., 3/16in. and 1/4in. sizes. Includes (qty.): 3, Diameter (in.): 1/8, 3/16, 1/4

This 3in. Wood and Drywall Blade is for use with Genesis Multipurpose Oscillating Tool, Item# 399456, sold separately. Works With: Genesis multipurpose oscillating tool, Application: Stright-line cutting For fast straight-line cutting in wood, plastic and drywall

This 2-Pk. of Scraper Blades is for use with Genesis Multipurpose Oscillating Tool, Item# 399456, sold separately. Works With: Genesis multipurpose oscillating tool, Application: Scraping Flexible scraper blade for caulk, paint and adhesives Rigid scraper blade for vinyl, varnish, carpeting and linoleum

This 12-Pc. Sandpaper Pack is for use with Genesis Multipurpose Oscillating Tool, Item# 399456, sold separately. Grit: Assorted, Sheets (qty.): 12, Pieces (qty.): 12 3 each: 60-grit, 80-grit, 120-grit and 240-grit Hook-and-loop attachment

This Bi-Metal 35mm Flush Cut Blade is for use with Genesis Multipurpose Oscillating Tool, Item# 399456, sold separately. Works With: Genesis multipurpose oscillating tool, Application: Flush cutting Bi-metal 35mm flush cut blade for cutting nonferrous metals, other soft metals, wood, plastic and drywall

Opens most chucks on tools by: Skil, Milwaukee, Makita, Ingersoll-Rand, Chicago Pneumatic, Delta, Craftsman, Porter Cable, Black & Decker, Jacobs, Cooper, Craftsman, Rockwell, Ridgid and more! High-quality steel. 3in. x 3in.. 1 year warranty. Drive (in.): 1/4, 3/8, and 1/2, Chuck Key Type: Table, Square Center Hole: Yes, Material Type: Treated steel with black oxide finish, Overall Dimensions L x W x H (in.): 3 x 3

The Milescraft WheelEzze is an ergonomically designed wheel dressing stick that provides a safe and easy solution to dressing any grinding wheel. Round front end lets you roll the tool across stone surface on tool rest. The large handle allows your entire hand to hold the stick while rotating stone across the face of your wheel. Exclusive protective shield protects fingers and hands. Silicon carbide stone allows you to clean or contour your wheel to your preference. Clear body shows remaining grinding stone.

Includes Black Emery, Brown Tripoli, White Diamond and Red Rouge compounds. U.S.A. Recommended Use: Polishing, Includes (qty.): 4 pc. Assorted

Pack contains five 4in. multi-purpose blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: Multi-purpose, Blade Size (in.): 4, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Pack contains five 4in. PVC-cutting blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: PVC cutting, Blade Size (in.): 4, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Pack contains five 4in. EMT/conduit-cutting blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: EMT/Conduit-cutting, Blade Size (in.): 4, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Pack contains five 4in. multi-purpose blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: Duct cutting, Blade Size (in.): 4, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Pack contains five 4in. plaster-cutting blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: Plaster cutting, Blade Size (in.): 4, Blades (qty.): 4 Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

For use with Milwaukee hole saws 9/16in. to 1-3/16in. diameter 1/4in shank with 3 milled flats for greater gripping capability in the chuck 1/2in. - 20 thread Model 49-56-6960 U.S.A. Material Type: Steel, Saw Size (in.): 9/16in. to 1-3/16in. diameter

This continuous wet/dry blade from QEP makes quick cuts in ceramics, porcelain and marble tiles. Blade Use: Wet/Dry to Cut Ceramics, Porcelain, and Marble, Blade Diameter (in.): 4, Arbor Size (in.): 5/8, Arbor Knockout: 7/8mm, Blades (qty.): 1 Cuts ceramics, porcelain and marble 7mm rim height .060&Quot; wide 5/8&Quot; arbor with knock-out ring to create 7/8mm arbor

Titan quick-release bit extension is designed for working in hard-to-reach areas. Works With: Drill Bits in Confined Areas, Pieces (qty.): 1, Extension Length (in.): 12, Magnetic: Magnetic Chuck Internal rotating shaft Allows user to hold the outside of extension to work in confined spaces Low profile auto-locking magnetic chuck Quick-release function for fast bit changes

This 8in. diameter cloth wheel is designed for use with bench buffer, Item#s 1506078 and 18652. Recommended Use: Designed for use with #1506078 & 19652 bench buffers, Material Type: Cloth, Pad Dimension (in.): 8, Arbor Size (in.): 5/8, Includes (qty.): 1

Replacement carbide-tipped combination blade for use with Item# 399420, the Powersmith 12V Compact Li-Ion 4in. Maglithion Circular Saw. Blade Diameter (in.): 4, Tip Type: Carbide tipped, Blades (qty.): 1 One replacement blade for use with Item# 399420

This 3-Pk. of Flush Cut Blades is for use with Genesis Multipurpose Oscillating Tool, Item# 399456, sold separately. Works With: Genesis multipurpose oscillating tool, Application: Flush cutting 10mm, 20mm and 30mm flush cut blades For cutting wood, plastic or drywall

This 1/8in. Grout Removal Blade is for use with Genesis Multipurpose Oscillating Tool, Item# 399456, sold separately. Works With: Genesis multipurpose oscillating tool, Application: Grout removal 1/16in. width for removing grout from floor or wall tiles for replacement or restoration

Dual temperature gun uses 0.44 glue sticks. Has retractable wire stand. Ideal for home repairs, home decor, floral hobbies, and crafts. Watts: 40, Dual Temperature: Yes, Glue Stick Size (in.): 7/16, Retractable Wire Stand: Yes

Fits 1/2in., 3/4in. and heavy duty 3/8in. chucks plus acetylene tanks. Opens 86 Larger- Size Chucks. U.S.A. Drive (in.): 1/2, 3/4, and 3/8, Chuck Key Type: Table, Square Center Hole: Yes, Material Type: Treated steel with black oxide finish

For use with Item# 155702. 5/8in. x 1 1/2in. shank size. 3in. depth capacity. Chisel Type: Mortising, Bit Diameter (in.): 5/8, Shaft Diameter (in.): 3/4, Reduced Shaft Length (in.): 5 1/2, Reduced Shaft Diameter (in.): 1/2, Depth Capacity (in.): 3, Length of Travel (in.): 2 15/16

Material Type: Steel plated and rust resistant, Includes (qty.): 1 Tool Cleans and adds life to buffing pads and bonnets Removes glazed surfaces and fluffs packed wool Cleans without removing pad

The 4-pc. Northern Industrial single flute end mill set is made of M2 high speed steel. Includes (qty.): 4, Diameter (in.): 1/8, 5/32, 1/4, 5/16, Case Included: Yes 5/16in. shank Includes 1/8in., 5/32in., 1/4in. and 5/16in. sizes

Includes 7 star, 4 hex, 3 square, 3 Phillips and 3 slotted 1in.L bits, plus a 1/4in. x 2 1/2in. bit holder. Also includes case. Driver & Adapter Qty.: 22 pc. Set, Compatible Tool: Drill, Bit Holder Included: Yes, Bit Holder Size (in.): 1/4 x 2 1/2, Storage Case Included: Yes

Includes 5 star, 3 Phillips and 2 slotted bits, 8 nut drivers (3/16in.-7/16in.), plus a 1/4in. x 2in. bit holder. Also includes case. Adapter Size (in.): 3/16 - 7/16, Driver & Adapter Qty.: 18 pc. Set, Compatible Tool: Drill, Bit Holder Included: Yes, Bit Holder Size (in.): 1/4 x 2, Storage Case Included: Yes

Pack contains five 3 1/2in. wood scrolling Hackzall blades, designed to maximize the performance of the M12 Hackzall, Item# Item# 334222. U.S.A. Blade Application: Wood scrolling, Blade Size (in.): 3 1/2, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Pack contains five 3 1/2in. metal scrolling Hackzall blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: Metal scroll, Blade Size (in.): 3 1/2, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Blade Application: General applications, Blade Size (in.): 6, TPI (Teeth per Inch): 10, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Straight back Matrix II high-speed steel teeth with 8% cobalt For cutting all woods, nail embedded woods, composition material, plastic, ferrous and non-ferrous metals Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5092 U.S.A.

Blade Application: Metal, Rubber, and Fiber cutting, Blade Size (in.): 6, TPI (Teeth per Inch): 14, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Straight back Matrix II high-speed steel teeth with 8% cobalt For cutting metal 3/16in. thru 1/4in., conduit, tubing, channels, pipe, rubber and fiber Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5182 U.S.A.

Blade Application: Thin metal, Blade Size (in.): 6, TPI (Teeth per Inch): 24, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Straight back Matrix II high-speed steel teeth with 8% cobalt For cutting thinner metal than 1/8in. tubing, channels and pipe Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5186 U.S.A.

8% cobalt within the teeth matrix and 2 high-speed steel. Tough bi-metal design for fast cutting and long-lasting blade life. Blade Application: Conduit/Tubing, Blade Size (in.): 6, TPI (Teeth per Inch): 18, Blade Material: Bi-Metal, Blades (qty.): 5, Blade Type: Sawzall

The IRWIN Marathon 7 1/4in. 24-tooth circular saw blade is designed tough and long lasting for the professional. The thin kerf design provides faster, cleaner cutting action as less material is being removed. The hardened plate runs truer and avoids warping. C3 carbide tips provide long life and are impact resistant. The specifically engineered heat vents reduce heat and resin build up which can lead to blade binding and warping. Marathons unique shoulder design puts more support behind each tooth and provides for consistent chip removal. Marathon saw blades are truly “Long Distance Runners.” Blade Use: Trim and Finish, Blade Diameter (in.): 7 1/4, Arbor Knockout: Yes, Teeth (qty.): 24, Tooth Grind: Face ground carbide, Tip Type: C3 Carbide, Reinforced Shoulder: Yes, Engineered Venting: Yes, Professional Series: Yes, Blade Speed (RPM): 8,300, Blades (qty.): 1 Thin kerf for fast cuts Construction carbide teeth for longer life Face ground carbide teeth for fast, clean cuts Fully hardened plate runs truer longer Reinforced shoulder for added durability Specially engineered vents reduce heat build-up and warping Model 24030

Fast and productive, the auger has wide flutes for fast chip removal and a screw-tip to assist the user in boring fast, clean holes. Diameter (in.): 1/2, Length (in.): 7.5, Twist Length (in.): 4.5 Single-spur design scribes the circumference of the hole first to leave a smoother finish Coarse screw point provides fast boring in both soft and hard woods Precision-ground cutting edge for a longer life Full-length heat treatment guards against bending bit in heavy-duty applications Wide lands keep bit straight as it bores through the hole Model 49908

5 blades with 10 tpi, 5 with 24 tpi and 5 with 7 tpi. Blade Size (in.): 6, TPI (Teeth per Inch): 7, 10, and 24, Blades (qty.): 15, Blade Type: Taper / Straight Back

Pack contains three 4in. fiberglass-cutting blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: Fiberglass cutting, Blade Size (in.): 4, Blades (qty.): 3, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Pack contains five 4in. wood-cutting blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: Wood Cutting, Blade Size (in.): 4, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Pack contains five 6in. PVC-cutting blades designed to maximize the performance of the Milwaukee M12 Hackzall, Item# 334222. U.S.A. Blade Application: Long PVC cutting, Blade Size (in.): 6, Blades (qty.): 5, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Titan quick-release bit extension is designed for working in hard-to-reach areas. Works With: Drill Bits in Confined Areas, Pieces (qty.): 1, Extension Length (in.): 18, Magnetic: Magnetic Chuck Internal rotating shaft Allows user to hold the outside of extension to work in confined spaces Low-profile auto-locking magnetic chuck Quick-release function for fast bit changes

Milwaukees Standard/Deep Cut Portable Band Saw Blade is designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 14/18, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): 0.20, Cutting Thickness (in.): 5/32 - 5/16, Blades (qty.): 1 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For interrupted cutting in structurals and profiles 5/32in. to 5/16in. thick

Blade Application: Wood, Non-ferrous metals, and Aluminum, Blade Size (in.): 8, TPI (Teeth per Inch): 10/14 Variable, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Straight back Matrix II high-speed steel teeth with 8% cobalt For cutting all woods, nail embedded woods, composition material, plastic, light gauge non-ferrous metals and aluminum 5/8in. width for higher flexibility Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5193 U.S.A.

Blade Application: Metal cutting, Blade Size (in.): 9, TPI (Teeth per Inch): 18, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Straight back Matrix II high-speed steel teeth with 8% cobalt For cutting metal 1/8in. thru 3/16in. conduit, tubing, channels and pipe Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5188 U.S.A.

Fast and productive, the auger has wide flutes for fast chip removal and a screw-tip to assist the user in boring fast, clean holes. Diameter (in.): 3/8, Length (in.): 7.5, Twist Length (in.): 4.5 Single-spur design scribes the circumference of the hole first to leave a smoother finish Coarse screw point provides fast boring in both soft and hard woods Precision-ground cutting edge for a longer life Full-length heat treatment guards against bending bit in heavy-duty applications Wide lands keep bit straight as it bores through the hole Model 49906

Fast and productive, the auger has wide flutes for fast chip removal and a screw-tip to assist the user in boring fast, clean holes. Diameter (in.): 3/4, Length (in.): 7.5, Twist Length (in.): 4.5 Single-spur design scribes the circumference of the hole first to leave a smoother finish Coarse screw point provides fast boring in both soft and hard woods Precision-ground cutting edge for a longer life Full-length heat treatment guards against bending bit in heavy-duty applications Wide lands keep bit straight as it bores through the hole Model 49912

The worlds most popular drill chuck for portable power tools. Features through#&150;hardened jaws for hard, wear-resistant gripping surface. Ideal for corded or cordless reversible or non-reversible power drills. U.S.A. Drive (in.): 3/8, Chuck Key Type: Multi-Crafted

Ideal for wood cutting and demolition work. Blade Application: Wood cutting and Demolition, Blade Size (in.): 6, TPI (Teeth per Inch): 5/8 Variable, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 182, Reversible: Yes, Blades (qty.): 5, Blade Type: Taper back Matrix II high speed steel teeth with 8% cobalt AX blades are 1in. tall for straight, fast cutting, and extra-thick, 0.062in. to prevent bending For cutting into walls that contain wood, nails, plaster and aluminum Tough bimetal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp

Titanium nitride-coated steel bits in sizes 1/16in. to 1/4in. and stored in an indexed, rotating cylindrical storage container. Includes (qty.): 13, Material: Steel, titanium, Diameter (in.): 1/16in. - 1/4in., Case Included: Yes Titanium nitride coating (TiN) for reduced wear and longer drill bit life 118° standard point drill bits Cylindrical storage container has bit sizes clearly marked

The Genesis Carbide Rasp is designed for use with the Genesis Oscillating Tool (sold separately). Rasp is used for aggressive material removal of wood, tile, adhesives, cement and mortar. It quickly removes Thinset when replacing tiles. Blade Type: Carbide rasp, Pieces (qty.): 1 For wood, tile, adhesives, cement and mortar Removes Thinset behind tiles

Now you never have to run to the hardware store to replace a broken bit. This set includes 31 drill bits in commonly used sizes from 1/16in. to 3/8in. by 1/64 in. steps and 31 replacement bits. Reduced shank bits fit all drills 3/8 in. or longer. Titanium-coated drill bits resist heat for durability. Storage box is indexed to help you find the right bit quickly. Replacement bits are packed in 4 storage tubes. Includes (qty.): 62, Diameter (in.): 1/16 - 3/8, Includes: Bits and case, Case Included: Yes

Milwaukee ice-hardened hole saw delivers up to 50% longer life. U.S.A. Bi-Metal: Yes, Saw Size (in.): 2 1/2, Length (in.): 4, Tooth Style: Wave, Ice Hardened: Yes, Off Set Slots: Yes, Saw (qty.): 1 Wave tooth cuts up to 50% faster Offset slots allow for fast plug removal

Extend your reach 5 1/2 inches when drilling with Milwaukee selfeed bits, auger bits and hole saws (1in. diameter and larger). The quick-change shank is 7/16in. hex, which fits both 3-jawed chucks, 1/2in. drill capacity and larger, as well as 7/16in. quick-change chucks. Diameter (in.): 7/16, Length (in.): 5 1/2, Works With: Selfeed bits, auger bits and hole saws

Blade Application: Metal cutting, Blade Size (in.): 9, TPI (Teeth per Inch): 14, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Straight back Matrix II high-speed steel teeth with 8% cobalt For cutting metal 3/16in. thru 1/4in., conduit, tubing, channels, pipe, rubber and fiber Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5187 U.S.A.

Milwaukee® Shockwave Impact Duty™ Magnetic Nut Drivers are engineered for extreme durability and up to 10X life. Made from proprietary steel and heat treated to control hardness, the Shockwave Impact Duty magnetic nut drivers feature a powerful magnet allowing for a secure grip and unyielding bit engagement. The bits feature color-coded rings for quick and easy size identification and a chamfered edge to allow for fastening in tight spaces. Adapter Size (in.): 1/4, 5/16, 3/8, 7/16, Driver & Adapter Qty.: 4, Driver / Adapter Material: Steel, Shank Diameter (in.): 1/4, Storage Case Included: No Sizes include: 1/4in. x 1 7/8in., 5/16in. x 1 7/8in., 3/8in. x 1 7/8in., 7/16in. x 1 7/8in.

Raker carbon blade. 0.5in. x 0.03in. x 64 1/2in. U.S.A. Blade Type: Raker carbon, TPI (Teeth per Inch): 14, Blade Size L x W (in.): 64 1/2 x 1/2, Blade Thickness (in.): .025, Blades (qty.): 1 For Item#s 155790, 155792, 15574, 15507

Raker carbon blade. 10 TPI. 64 1/2in.L x 1/2in.W. U.S.A.

Raker carbon blade. 18 TPI. 64 1/2in.L x 1/2in.W. U.S.A.

Raker carbon blade. 24 TPI. 64 1/2in.L x 1/2in.W. U.S.A.

Drilling holes in confined areas poses no problems when using a stubby drill bit. These durable drill bits are precision ground from one piece of M2 high speed steel; there is no weak spot where two pieces are welded or crimped together. 135° tip bits are ideal for drilling into metal, plastic, or other materials. Includes (qty.): 5, Diameter (in.): 3/32, 1/8, 3/16, 1/4, 5/16, Case Included: Bit holder 1/4in. hex shanks fit quick-change chucks A little under 2in. to a little over 2 1/4in. overall length lets you drill in confined spaces and around tight corners

Grip-On step drill bits let you accurately drill specific-sized holes for woodworking and more. Made of drop-forged high speed steel with titanium coating for longer life. Includes (qty.): 3, Diameter (in.): 3/16 - 1/2, 1/2 - 3/4, 1/8 - 1/2, Material: High speed steel, Steps: 6, 9, 13 Includes 3/16in.-1/2in. six-step bit, 1/2in.-3/4in. nine-step bit and 1/8in.-1/2in. thirteen-step bit

Full size glue gun uses 7/16in.dia., 4–10in. long glue sticks, perfect for highly detailed do-it-yourself crafts and projects. Glue Stick Size (in.): 4-10 High temperature creates better bonding to metal, wood and all nonporous materials Comes with free auxiliary stand

Blade Application: Roughing in work, Blade Size (in.): 9, TPI (Teeth per Inch): 6, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Taper back Matrix II high-speed steel teeth with 8% cobalt For very fast cutting in nail-embedded wood and general roughing-in work Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5036 U.S.A.

Fast and productive, the auger has wide flutes for fast chip removal and a screw-tip to assist the user in boring fast, clean holes. Diameter (in.): 1, Length (in.): 7.5, Twist Length (in.): 4.5 Single-spur design scribes the circumference of the hole first to leave a smoother finish Coarse screw point provides fast boring in both soft and hard woods Precision-ground cutting edge for a longer life Full-length heat treatment guards against bending bit in heavy-duty applications Wide lands keep bit straight as it bores through the hole Model 49916

Raker carbon blade. 14 TPI. 85in.L x 3/4in.W. U.S.A.

Raker carbon blade. 18 TPI. 85in.L x 3/4in.W. U.S.A.

Raker carbon blade. 10 TPI. 85in.L x 3/4in.W. U.S.A. Blade Type: Raker carbon, TPI (Teeth per Inch): 10, Blade Size L x W (in.): 85 x 3/4, Blades (qty.): 1

Precisely engineered drill bits are made from carbon steel. The multi-angle drill bits can can be used in place of auger bits, spade bits, Forstner bits, routers and chisels to form holes, channels, mortises and even curved holes. Includes (qty.): 11, Case Included: Yes 7-pc. multi-angle bits in sizes 5/32in., 3/16in., 7/32in., 1/4in., 1/2in., 3/4in. and 7/8in. 4-pc. HSS drill bit set in sizes 1/16in., 3/32in. and 1/8in. and 9/64in.

Rotary tool accessories include 2 twist drills, 2 sanding shanks, 4 diamond cutters, 3 steel cutters, 24 grinding wheels, 9 brushes, 76 cutoff wheels, 44 sanding discs, collets, mandrels and more. Application: Rotary tool accessories, Wheel Included: Yes, Case Included: Yes

Blade Application: Metal cutting, Blade Size (in.): 12, TPI (Teeth per Inch): 18, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Straight back Matrix II high-speed steel teeth with 8% cobalt For cutting metal 1/8in. thru 3/16in., conduit, tubing, channels and pipe Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5189 U.S.A.

Fast and productive, the auger has wide flutes for fast chip removal and a screw-tip to assist the user in boring fast, clean holes. Diameter (in.): 7/8, Length (in.): 7.5, Twist Length (in.): 4.5 Single-spur design scribes the circumference of the hole first to leave a smoother finish Coarse screw point provides fast boring in both soft and hard woods Precision-ground cutting edge for a longer life Full-length heat treatment guards against bending bit in heavy-duty applications Wide lands keep bit straight as it bores through the hole Model 49914

Combo drill bit/driver set includes 20 high speed steel twist drills plus 7 chrome vanadium steel nut drivers, 47 chrome vanadium steel driver bits and quick-change chuck. Includes (qty.): 75, Diameter (in.): 1/16 to 3/8, 3/16 to 7/16 20 high speed steel twist drills (1/16in. to 3/8in.) 7 chrome vanadium steel nut drivers (3/16in. to 7/16in.) 47 chrome vanadium steel driver bits Quick-change chuck

Recommended Use: Compounding, Material Type: Wool, Pad Dimension (in.): 7, Includes (qty.): 1 For use with electronic sander-polisher Model 192629-7 U.S.A.

Recommended Use: Polishing, Material Type: Wool, Pad Dimension (in.): 7, Hook and Loop Style: Yes, Includes (qty.): 1 For use with electronic sander-polisher

For use with Milwaukee Compact Band Saw Item# 153460 and other Milwaukee models. Designed to deliver long tooth life and exceptional durability in metal-cutting applications. Matrix II high speed steel teeth and alloy backing steel. 35 3/8in. x 1/2in. x 0.020in. U.S.A. Blade Type: Steel, TPI (Teeth per Inch): 10, Blade Size L x W (in.): 35 3/8 x 1/2, Blade Thickness (in.): .02, Blades (qty.): 3

For use with Milwaukee Compact Band Saw Item# 153460 and other Milwaukee models. Designed to deliver long tooth life and exceptional durability in metal-cutting applications. Matrix II high speed steel teeth and alloy backing steel. 35 3/8in. x 1/2in. x 0.020in. U.S.A. Blade Type: Matrix II high speed steel, TPI (Teeth per Inch): 14, Blade Size L x W (in.): 35 3/8 x 1/2, Blade Thickness (in.): .02, Blades (qty.): 3

For use with Milwaukee Compact Band Saw Item# 153460 and other Milwaukee models. Designed to deliver long tooth life and exceptional durability in metal-cutting applications. Matrix II high speed steel teeth and alloy backing steel. 35 3/8in. x 1/2in. x 0.020in. U.S.A. Blade Type: Steel, TPI (Teeth per Inch): 18, Blade Size L x W (in.): 35 3/8 x 1/2, Blade Thickness (in.): .02, Blades (qty.): 3

For use with Milwaukee Compact Band Saw Item# 153460 and other Milwaukee models. Designed to deliver long tooth life and exceptional durability in metal-cutting applications. Matrix II high speed steel teeth and alloy backing steel. 35 3/8in. x 1/2in. x 0.020in. U.S.A. Blade Type: Steel, TPI (Teeth per Inch): 24, Blade Size L x W (in.): 35 3/8 x 1/2, Blade Thickness (in.): .02, Blades (qty.): 3

These Northern Industrial steel drills and chisels feature SDS construction for strength and durability. Works With: Standard Drill, Pieces (qty.): 11, Material Type: Steel, Case Included: Yes Nine drill bits Point chisel Flat chisel SDS construction

For Powersmith 18V cordless drill Item# 399987. 2-year limited warranty. Compatible With: Powersmith Cordless Drill, Battery Type: Ni-Cd, Volts: 18

Blade Application: Roughing in work, Blade Size (in.): 12, TPI (Teeth per Inch): 6, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Taper back Matrix II high-speed steel teeth with 8% cobalt For very fast cutting in nail embedded wood and general roughing-in work Tough bi-metal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp Model 48-00-5037 U.S.A.

The IRWIN Marathon 8 1/4in. 24-tooth circular saw blade is designed tough and long lasting for the professional. The thin kerf design provides faster, cleaner cutting action as less material is being removed. The hardened plate runs truer and avoids warping. C3 carbide tips provide long life and are impact resistant. The specifically engineered heat vents reduce heat and resin build up which can lead to blade binding and warping. Marathons unique shoulder design puts more support behind each tooth and provides for consistent chip removal. Marathon saw blades are truly “Long Distance Runners.” Blade Use: General purpose, Blade Diameter (in.): 8 1/4, Teeth (qty.): 24, Tooth Grind: 400 grit diamond ground, Tip Type: Construction micro grain carbide, Reinforced Shoulder: Yes, Engineered Venting: Yes, Professional Series: Yes, Blade Speed (RPM): 7,300, Blades (qty.): 1 Thin kerf for fast cuts Construction micro grain carbide teeth for longer life Diamond ground teeth for faster, cleaner cuts Precision tensioned and balanced plate for an accurate and true cut Reinforced shoulder for added durability Model 14050

Ideal for wood cutting and demolition work. Blade Application: Wood Cutting and Demolition Work, Blade Size (in.): 9, TPI (Teeth per Inch): 5/8 Variable, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Taper Back Matrix II high speed steel teeth with 8% cobalt AX blades are 1in. tall for straight, fast cutting, and extra-thick, 0.062in. to prevent bending For cutting into walls that contain wood, nails, plaster and aluminum Tough bimetal design for fast-cutting, long-lasting blade life 1/2in. universal blade tang fits all Sawzalls Blade reversible in clamp

Milwaukee® Shockwave™ Impact-Duty Driver Bits are engineered for extreme durability and up to 10X life. Made from proprietary steel and heat treated to control hardness, the Shockwave impact-duty driver bits feature an innovatively designed geometric shock absorption zone to extend life. The forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. Ideal for heavy-duty impact applications, delivering a full system solution for all drilling and fastening needs. Tip Type: Phillips, Tip Size: #2, Bits (qty.): 25, Size (in.): 1&Quot;, Snub Nose Design: No, Bit Material: Heat-treated steel, Storage Case Included: Yes 25 per package Geometric design provides the shock absorption zone Proprietary steel and heat treat process for maximum strength and durability Forged tips for maximum grip 1in.L x 1/4in. dia.

Milwaukee® Thunderbolt® Black Oxide jobber-length drill bits are designed for extreme durability and long life. The Thunderbolt web features a thicker core than a standard drill bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills. The 3-Flat Secure-Grip shank wont slip in the drill chuck. Reduced shank diameter for use in 3/8in. chucks. Includes (qty.): 21, Size: Jobber, Finish Type: Black oxide, Shank Diameter (in.): 3/8, Case Included: Yes Sizes include: (2) 1/16in., (2) 5/64in., 3/32in., 7/64in., (2) 1/8in., 9/64in., 5/32in., 11/64in., (2) 3/16in., 13/64in., 7/32in., 15/64in., (2) 1/4in., 5/16in., 3/8in., 1/2in.

Milwaukee® Thunderbolt® Black Oxide jobber length drill bits are designed for extreme durability and long life. The Thunderbolt® web features a thicker core than a standard drill bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast accurate holes. The 3-Flat Secure-Grip shank wont slip in the drill chuck. Reduced shank diameter for use in 3/8in. chucks. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills. Diameter (in.): 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 3/8, Includes (qty.): 15, Size: Jobber, Finish Type: Black oxide, Shank Diameter (in.): 3/8, Case Included: Yes Thunderbolt® web provides longer life and faster driller times Parabolic flute clears chips faster 135° split point delivers precision starts and no walking 3-Flat Secure Grip shank reduces bit slipping in chuck

The Milwaukee® Sawzall® Wrecker™ bi-metal blade is ideal for general purpose demolition cutting. It will deliver exceptional durability in a wide range of materials, including ferrous and non-ferrous metals, plastics and nail-embedded wood. U.S.A. Blade Application: Remodeling, rescue and demolition of wood & metal, Blade Size (in.): 9, TPI (Teeth per Inch): 8, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Reversible: Yes, Blades (qty.): 5, Blade Type: Demolition 5-pk. of 9in., 8 TPI Wrecker bi-metal blades For general purpose demolition A precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting blade A complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing A thicker, more rigid blade body resists fracturing and bending for maximum durability The 1in. tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability

Wel-Bilt™ left-hand bits are useful for extracting broken screws and studs in a single operation. Includes (qty.): 15, Diameter (in.): 1/16 - 1/2 by 32nds, Case Included: Yes High speed steel Rugged metal case Sizes: 1/16in.-1/2in. by 32nds Not related to WELBILT® products of Enodis companies

Titanium-coating increases surface harness to resist wear, making bits last 2 to 3 times longer than standard HSS bits. Made of quality high speed steel. Includes (qty.): 29, Material: High speed steel, Case Included: Yes 1/16in - 1/2in. by 64ths Fits standard chuck up to 1/2in.

Replacement blade for band saw Item#s 155793, 14573, 145767 U.S.A. Blade Type: Steel, TPI (Teeth per Inch): 10, Blade Size L x W (in.): 93 x 3/4, Blade Thickness (in.): .032, Blades (qty.): 1

Single-speed palm sander removes paint and fine-finishes woodcraft projects. Accepts 1/4-sheet sandpaper. Dust and debris is collected through the pad and deposited into a bag for nearly dust-free sanding. Palm grip for maximum comfort and control. Includes 100-grit sandpaper and dust bag. Speed (RPM): 14,000, Amps: 1.5, Dust Bag Included: Yes Accepts 1/4-sheet sandpaper Dust and debris collected through pad Includes 100-grit sandpaper and dust bag Not related to WELBILT® products of Enodis companies

Milwaukees Shockwave Impact Duty™ Driver Bits feature an innovative geometric shock absorption zone that extends life up to 10X longer than standard driver bits. Forged tip secures grip to eliminate stripping or slipping. Tip Type: Phillips, Torx, square, nut drivers, Tip Size: Multiple, Bits (qty.): 29, Size (in.): 1 and 2, Bit Material: Propriety heat treated, Storage Case Included: Yes, Compatible Tool: Cordless drill/drivers, cordless impact drivers Phillips Bits: 1in. - (1) P1, (7) P2, (2) P3; 2in. Power - (2) P2, (1) P3 Square Bits: 1in. - (1) SQ1, (4) SQ2, (1) SQ3; 2in. Power - (2) SQ2 Torx® Bits: 1in. - (1) T15, (1) T20, (1) T25; 2in. Power - (1) T25 Magnetic Nut Drivers: (1) 1/4in. Red, (1) 5/16in. Amber, (1) 3/8in. Blue Magnetic bit holder

Raker carbon blade. 14 TPI. 93in.L x 3/4in.W. U.S.A.

Raker carbon blade. 18 TPI. 93in.L x 3/4in.W. U.S.A.

Keep your Work Sharp® Tool Sharpener WS3000 (Item# 3353000) free from dust when not in use. The 10.5in. x 8.5in. x 9in. durable nylon cover is designed to fit completely over the Tool Sharpener. Application: Dust cover

Use as replacement or extra battery for the Genesis 18V drill driver. (Item# 21285, sold separately). Ni-Cd battery offers long-lasting power and quick recharging. 1.1Ah. Compatible With: Genesis 18V drill driver, Battery Amp/Hour: 1.1, Battery Type: Ni-Cd, Volts: 18, Items Included: 1 battery

This tile saw blade from QEP is designed to cut through ceramic, porcelain and marble. Blade Use: Cuts Through Ceramic, Porcelain, and Marble, Blade Diameter (in.): 7, Arbor Size (in.): 5/8, Blades (qty.): 1 7mm rim height .060in. wide For use with Item#s 251183 and 251184

The Milescraft Drill90 turns your drill into a multifunctional tool! Fits all 3/8in.- and 1/2in.-drive drills and features a 90° design that makes it ideal for getting into tight spaces. Strong polymer handle allows for either left- or right-hand usage. 3/8in. geared chuck is ready for any job. Beveled gears are made of industrial-grade metal for durability. Includes key chuck. Hex Shaft Size (in.): 3/8 - 1/2, Gear Assembly Style: Beveled, Gear Train: Industrial-grade metal, Rotation Direction: 90 Degrees, Chuck Size (in.): 3/8, Dimensions L x W x H (in.): 2 1/2 x 6 7/8 x 8

This compact yet tough right angle power drill attachment allows you to drill holes and drive screws in tight spaces. Gears are housed in a die-cast body and three sets of ball bearings provide long-lasting smooth durability and performance. Ergonomic handle provides a firm, comfortable grip. Intended for driving screws or drilling small holes; not intended for use with 3/8in. (wood drilling) or 5/16in. (metal drilling) bits, hole saws or auger bits. Hex Shaft Size (in.): 1/4, Gear Assembly Style: Die cast body, Gear Train: Ball bearing, Rotation Direction: Forward / reverse, Chuck Size (in.): 1/4 Hex, Dimensions L x W x H (in.): 6 x 1 x 1 1/4 Magnetic 1/4in. hex socket accepts and holds standard 1/4in. drill and driver bits 1/4in. hex shaft fits most standard and quick-change chucks 400 RPM recommended Includes 1in. driver bits (square, slotted and Phillips)

Complete set of polishing and buffing accessories for detailing autos, cycles, boats, RVs, almost anything metal that needs a new look. Includes compound for polishing stainless steel, mushroom, cylinder and tapered buffs, felt bobs, spiral sewn buffs and single-stitched buff. All are mounted on a 1/4in. shaft. Recommended Use: Polishing/Buffing, Material Type: Stainless steel, Arbor Size (in.): 1/4, Includes (qty.): 15

Milwaukees Standard/Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 10, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): 1/2, Cutting Thickness (in.): 0.20, Blades (qty.): 3 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For cutting common materials 5/16in. to 1/2in. thick

Milwaukees Standard/Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 14, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): .20, Cutting Thickness (in.): 3/16 - 1/2, Blades (qty.): 3 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For cutting common materials 3/16in. to 1/2in. thick and very hard materials 5/16in. to 1/2in. thick

Milwaukees Standard/Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 18, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): .20, Cutting Thickness (in.): 3/16 - 5/16, Blades (qty.): 3 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For cutting common materials 5/32in. to 3/16in. thick and very hard materials 3/16in. to 5/16in. thick

Milwaukees Standard/Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 24, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): .20, Cutting Thickness (in.): 5/32 - 5/16, Blades (qty.): 3 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For cutting common materials 5/32in. thick and very hard materials 5/32in. to to 3/16in. thick

Milwaukees Standard/Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 10/14, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): .20, Cutting Thickness (in.): 3/16 - 1/2, Blades (qty.): 3 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For interrupted cutting in structurals and profiles 3/16in. to 1/2in. thick

Milwaukees Standard/Deep Cut Portable Band Saw Blades are designed to maximize performance of any portable band saw that takes a 44 7/8in. blade. You get exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. U.S.A. Blade Type: Bi-metal, TPI (Teeth per Inch): 14/18, Blade Size L x W (in.): 44 7/8 x 1/2, Blade Thickness (in.): .20, Cutting Thickness (in.): 5/32 - 5/16, Blades (qty.): 3 Matrix II high speed steel teeth for maximum durability Alloy-backing steel provides extended blade life Precision-formed teeth create fast, clean cuts For interrupted cutting in structurals and profiles 5/32in. to 5/16in. thick

Milwaukee bi-metal cobalt blades provide improved performance and longer life. U.S.A. Blade Application: Wood, Metal, and Gen. purpose, Blade Size (in.): 6, TPI (Teeth per Inch): 5/8 Variable, 8/12 Variable, 14, and 18, Blade Material: Bi-Metal, Tang Style: Universal, Tang Size (in.): 1/2, Blades (qty.): 9, Blade Type: Assorted Bi-metal cobalt blades for improved performance and longer life Two 5/8 TPI blades for nail-embedded wood One 8/12 TPI blade for general-purpose cutting Three 14 TPI blades for metal cutting Three 18 TPI blades for fine metal cutting

Replacement blade for Northern Industrial Tools 4 Amp Electric Shear, Item# 144347. Cutting Depth (in.): 3/16 - 9/16, Cutting Capacity Sheet Metal (gauge): 18

10-pc. blade set for use with the Milwaukee M12 Hackzall, Item# 334222. Includes blades for cutting ducts, EMT, Wood and PVC. U.S.A. Blade Application: Cutting ducts, EMT, Wood, and PVC, Blade Size (in.): 4 and 6, Blades (qty.): 10, Blade Type: Hackzall Thinner kerf design allows for 35% more cuts per charge than standard Sawzall blades

Huge 100-pc. set! For use on a mounted spindle. 1/8in. shank. Use with ASTM-rated safety glasses.